[PATCH v3 1/1] ARM: shmobile: r8a7778: add I2C support

[sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)]

On 16-05-2013 18:25, I wrote:

>> Basically, this patch is good for me.
>> But I have some comment.

>>> From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>

>>> Add I2C clocks and platform devices for R8A7778 SoC.
>>> Don't forget to also add the peripheral clock which the I2C driver uses.

>>> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
>>> [Sergei: changed the registration function to
>>> platform_device_register_simple(),
>>> annotated I2C resources as '__initdata', regrouped MSTPxxx *enum*
>>> members, added
>>> the copyright.]
>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>> (snip)
[...]

>>> +/* I2C */
>>> +static struct resource i2c0_resources[] __initdata = {
>>> +    DEFINE_RES_MEM(0xffc70000, 0x1000),
>>> +    DEFINE_RES_IRQ(gic_iid(0x63)),
>>> +};
>>> +
>>> +static struct resource i2c1_resources[] __initdata = {
>>> +    DEFINE_RES_MEM(0xffc71000, 0x1000),
>>> +    DEFINE_RES_IRQ(gic_iid(0x6e)),
>>> +};
>>> +
>>> +static struct resource i2c2_resources[] __initdata = {
>>> +    DEFINE_RES_MEM(0xffc72000, 0x1000),
>>> +    DEFINE_RES_IRQ(gic_iid(0x6c)),
>>> +};
>>> +
>>> +static struct resource i2c3_resources[] __initdata = {
>>> +    DEFINE_RES_MEM(0xffc73000, 0x1000),
>>> +    DEFINE_RES_IRQ(gic_iid(0x6d)),
>>> +};
>>> +
>>> +#define r8a7778_register_i2c(idx)            \
>>> +    platform_device_register_simple(        \
>>> +        "i2c-rcar", idx,            \
>>> +        i2c##idx##_resources,            \
>>> +        ARRAY_SIZE(i2c##idx##_resources))
>>> +
>>>   /* USB PHY */
>>>   static struct resource usb_phy_resources[] __initdata = {
>>>       DEFINE_RES_MEM(0xffe70800, 0x100),
>>> @@ -294,6 +321,11 @@ void __init r8a7778_add_standard_devices
>>>
>>>       r8a7778_register_tmu(0);
>>>       r8a7778_register_tmu(1);
>>> +
>>> +    r8a7778_register_i2c(0);
>>> +    r8a7778_register_i2c(1);
>>> +    r8a7778_register_i2c(2);
>>> +    r8a7778_register_i2c(3);
>>>   }

>> i2c1 - i2c3 pins are pin-multi.

>     Ah, you mean there should be I2C related entries in the pinmux table
> in the BOCK-W code?

    On the other hand, we only use I2C0 on BOCK-W which as you say is 
not pin-multiplexed.

>> I guess using r8a7778_add_i2c_devices(idx) from board code is better
>> method

>     Why? Not at all, I think, since we don't have the platform data.

    Hm, you may be right here...

>> Best regards
>> ---
>> Kuninori Morimoto

WBR, Sergei