From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] net: phy: prevent linking breakage
Date: Mon, 27 May 2013 19:37:26 +0200 [thread overview]
Message-ID: <51A399D6.8030000@free-electrons.com> (raw)
In-Reply-To: <20130527163913.GO32299@pengutronix.de>
On 27/05/2013 18:39, Sascha Hauer wrote:
> On Mon, May 27, 2013 at 06:18:42PM +0200, Alexandre Belloni wrote:
>> phy_register_fixup{,_for_uid,_for_id} are called from arch/, quite
>> often, there is no protection to check whether CONFIG_PHYLIB=y which is
>> the only case where this would work. Having phylib as a module or not
>> compiled at all will result in that kind of linking failure:
>>
>> arch/arm/mach-at91/built-in.o: In function `ksz9021rn_phy_fixup':
>> :(.text+0x1174): undefined reference to `mdiobus_write'
>> :(.text+0x1188): undefined reference to `mdiobus_write'
>> :(.text+0x119c): undefined reference to `mdiobus_write'
>> :(.text+0x11b0): undefined reference to `mdiobus_write'
>> arch/arm/mach-at91/built-in.o: In function `sama5_dt_device_init':
>> :(.init.text+0x1e34): undefined reference to `phy_register_fixup_for_uid'
>>
>> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
>> ---
>> drivers/net/phy/phy_device.c | 6 ++++++
>> include/linux/phy.h | 12 ++++++++++++
>> 2 files changed, 18 insertions(+)
>>
>> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
>> index 3657b4a..df36367 100644
>> --- a/drivers/net/phy/phy_device.c
>> +++ b/drivers/net/phy/phy_device.c
>> @@ -64,6 +64,11 @@ static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
>> u32 flags, phy_interface_t interface);
>>
>> /*
>> + * phy_register_fixup{,_for_uid,_for_id} are called from arch/ so this won't
>> + * work unless phylib is compiled in the kernel.
>> + */
>> +#ifdef CONFIG_PHYLIB
>> +/*
>> * Creates a new phy_fixup and adds it to the list
>> * @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID)
>> * @phy_uid: Used to match against phydev->phy_id (the UID of the PHY)
>> @@ -109,6 +114,7 @@ int phy_register_fixup_for_id(const char *bus_id,
>> return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run);
>> }
>> EXPORT_SYMBOL(phy_register_fixup_for_id);
>> +#endif /* CONFIG_PHYLIB */
>>
>> /*
>> * Returns 1 if fixup matches phydev in bus_id and phy_uid.
>> diff --git a/include/linux/phy.h b/include/linux/phy.h
>> index 9e11039..3f998a6 100644
>> --- a/include/linux/phy.h
>> +++ b/include/linux/phy.h
>> @@ -556,12 +556,24 @@ int phy_start_interrupts(struct phy_device *phydev);
>> void phy_print_status(struct phy_device *phydev);
>> void phy_device_free(struct phy_device *phydev);
>>
>> +/*
>> + * phy_register_fixup{,_for_uid,_for_id} are called from arch/ so this won't
>> + * work unless phylib is compiled in the kernel.
>> + * Defining stubs allows to prevent linking errors.
>> + */
>> +#ifdef CONFIG_PHYLIB
>> int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
>> int (*run)(struct phy_device *));
>> int phy_register_fixup_for_id(const char *bus_id,
>> int (*run)(struct phy_device *));
>> int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
>> int (*run)(struct phy_device *));
>> +#else
>> +#define phy_register_fixup(a, b, c, d) do { } while (0)
>> +#define phy_register_fixup_for_id(a, b) do { } while (0)
>> +#define phy_register_fixup_for_uid(a, b, c) do { } while (0)
> Use static inline functions here. This breaks if someone does result
> checking on the functions which then expands to ret = do {} while (0);
> Also we still have type safety for !CONFIG_PHYLIB.
Right, I tried that first but forgot static so I had issues with
redefinition of the functions. I even played with __weak at some point...
I'll wait a bit for comments before sending v2.
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2013-05-27 17:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-27 16:18 [PATCH 0/3] net: phy: prevent linking breakage Alexandre Belloni
2013-05-27 16:18 ` [PATCH 1/3] " Alexandre Belloni
2013-05-27 16:39 ` Sascha Hauer
2013-05-27 17:37 ` Alexandre Belloni [this message]
2013-05-27 22:20 ` Florian Fainelli
2013-05-27 16:18 ` [PATCH 2/3] arm: mxs: don't check for CONFIG_PHYLIB as builtin Alexandre Belloni
2013-05-27 16:18 ` [PATCH 3/3] arm: imx: " Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51A399D6.8030000@free-electrons.com \
--to=alexandre.belloni@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox