linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: daniel.lezcano@linaro.org (Daniel Lezcano)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 3/3] ARM: tegra114: cpuidle: add powered-down state
Date: Tue, 04 Jun 2013 23:40:51 +0200	[thread overview]
Message-ID: <51AE5EE3.3010607@linaro.org> (raw)
In-Reply-To: <1370342880-422-4-git-send-email-josephl@nvidia.com>

On 06/04/2013 12:48 PM, Joseph Lo wrote:
> This supports CPU core power down on each CPU when CPU idle. When CPU go
> into this state, it saves it's context and needs a proper configuration
> in flow controller to power gate the CPU when CPU runs into WFI
> instruction. And the CPU also needs to set the IRQ as CPU power down idle
> wake up event in flow controller.
> 
> Signed-off-by: Joseph Lo <josephl@nvidia.com>

I would like to understand why there is a WARN with the
CPUIDLE_FLAG_TIMER_STOP flag set before queuing this patch and ensure it
is not the tree hiding the forest.

Thanks
  -- Daniel

> ---
> V2:
> * remove some redundant code of memory barrier
> * remove the function declaration by rearranging the coding sequence 
> ---
>  arch/arm/mach-tegra/cpuidle-tegra114.c | 51 +++++++++++++++++++++++++++++++++-
>  1 file changed, 50 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c
> index 1d1c602..e0b8730 100644
> --- a/arch/arm/mach-tegra/cpuidle-tegra114.c
> +++ b/arch/arm/mach-tegra/cpuidle-tegra114.c
> @@ -17,15 +17,64 @@
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/cpuidle.h>
> +#include <linux/cpu_pm.h>
> +#include <linux/clockchips.h>
>  
>  #include <asm/cpuidle.h>
> +#include <asm/suspend.h>
> +#include <asm/smp_plat.h>
> +
> +#include "pm.h"
> +#include "sleep.h"
> +
> +#ifdef CONFIG_PM_SLEEP
> +#define TEGRA114_MAX_STATES 2
> +#else
> +#define TEGRA114_MAX_STATES 1
> +#endif
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int tegra114_idle_power_down(struct cpuidle_device *dev,
> +				    struct cpuidle_driver *drv,
> +				    int index)
> +{
> +	local_fiq_disable();
> +
> +	tegra_set_cpu_in_lp2();
> +	cpu_pm_enter();
> +
> +	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu);
> +
> +	cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
> +
> +	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
> +
> +	cpu_pm_exit();
> +	tegra_clear_cpu_in_lp2();
> +
> +	local_fiq_enable();
> +
> +	return index;
> +}
> +#endif
>  
>  static struct cpuidle_driver tegra_idle_driver = {
>  	.name = "tegra_idle",
>  	.owner = THIS_MODULE,
> -	.state_count = 1,
> +	.state_count = TEGRA114_MAX_STATES,
>  	.states = {
>  		[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
> +#ifdef CONFIG_PM_SLEEP
> +		[1] = {
> +			.enter			= tegra114_idle_power_down,
> +			.exit_latency		= 500,
> +			.target_residency	= 1000,
> +			.power_usage		= 0,
> +			.flags			= CPUIDLE_FLAG_TIME_VALID,
> +			.name			= "powered-down",
> +			.desc			= "CPU power gated",
> +		},
> +#endif
>  	},
>  };
>  
> 


-- 
 <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

  reply	other threads:[~2013-06-04 21:40 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-04 10:47 [PATCH V2 0/3] ARM: tegra114: cpuidle: add power down state Joseph Lo
2013-06-04 10:47 ` [PATCH V2 1/3] ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry Joseph Lo
2013-06-04 10:47 ` [PATCH V2 2/3] ARM: tegra114: add low level support for CPU idle powered-down mode Joseph Lo
2013-06-04 10:48 ` [PATCH V2 3/3] ARM: tegra114: cpuidle: add powered-down state Joseph Lo
2013-06-04 21:40   ` Daniel Lezcano [this message]
2013-06-12 17:41     ` Stephen Warren
2013-06-13  2:13       ` Joseph Lo
2013-06-13  9:30         ` Daniel Lezcano
2013-06-13 14:32           ` Joseph Lo
2013-06-13 15:02             ` Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=51AE5EE3.3010607@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).