From mboxrd@z Thu Jan 1 00:00:00 1970 From: dirk.behme@de.bosch.com (Dirk Behme) Date: Mon, 10 Jun 2013 08:33:12 +0200 Subject: [PATCH 2/4] ARM: imx: clk-imx6q: per1_bch's parent is wrong In-Reply-To: <20130603054655.GA23090@S2101-09.ap.freescale.net> References: <1370034115-24006-1-git-send-email-b20788@freescale.com> <1370034115-24006-2-git-send-email-b20788@freescale.com> <20130603012939.GB13970@S2101-09.ap.freescale.net> <20130603054655.GA23090@S2101-09.ap.freescale.net> Message-ID: <51B57328.404@de.bosch.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 03.06.2013 07:46, Shawn Guo wrote: > On Mon, Jun 03, 2013 at 09:29:41AM +0800, Shawn Guo wrote: >> On Fri, May 31, 2013 at 05:01:53PM -0400, Anson Huang wrote: >>> per1_bch is sourced from ahb, previous parent >>> info is incorrect. >>> >>> Signed-off-by: Anson Huang >> >> Applied, thanks. >> > I just pulled it out. As Reference Manual does not mention it, we need > to confirm with designer about the correct parent of per1_bch. Any news on this? Thanks Dirk >>> --- >>> arch/arm/mach-imx/clk-imx6q.c | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c >>> index dfb77c1..c501947 100644 >>> --- a/arch/arm/mach-imx/clk-imx6q.c >>> +++ b/arch/arm/mach-imx/clk-imx6q.c >>> @@ -518,7 +518,7 @@ int __init mx6q_clocks_init(void) >>> clk[openvg_axi] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30); >>> clk[pcie_axi] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0); >>> clk[mx6fast1] = imx_clk_gate2("mx6fast1", "ahb", base + 0x78, 8); >>> - clk[per1_bch] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12); >>> + clk[per1_bch] = imx_clk_gate2("per1_bch", "ahb", base + 0x78, 12); >>> clk[per2_main] = imx_clk_gate2("per2_main", "ahb", base + 0x78, 14); >>> clk[pwm1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16); >>> clk[pwm2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18);