From: mkl@pengutronix.de (Marc Kleine-Budde)
To: linux-arm-kernel@lists.infradead.org
Subject: BUG: commit "ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on pre-ARMv6 CPUs" breaks armv5 with CONFIG_PREEMPT
Date: Thu, 20 Jun 2013 13:47:25 +0200 [thread overview]
Message-ID: <51C2EBCD.4070206@pengutronix.de> (raw)
In-Reply-To: <51C2EA04.4060701@pengutronix.de>
On 06/20/2013 01:39 PM, Marc Kleine-Budde wrote:
> On 06/20/2013 01:35 PM, Marc Kleine-Budde wrote:
>> On 06/20/2013 01:12 PM, Catalin Marinas wrote:
>>> On Thu, Jun 20, 2013 at 11:28:56AM +0100, Catalin Marinas wrote:
>>>> We may need to place the preempt disable/enable at a higher level in the
>>>> scheduler. My theory is that we have a context switch from prev to next.
>>>> We get preempted just before finish_arch_post_lock_switch(), so the MMU
>>>> hasn't been switched yet. The new switch during preemption happens to a
>>>> thread with the same next mm, so the scheduler no longer switch_mm() and
>>>> the TIF_SWITCH_MM isn't set for the new thread.
>>>>
>>>> I'll come back with another patch shortly.
>>>
>>> Here's another attempt (as before, only compile-tested):
>>
>> booting kernel from /image
>> zImage: concatenated oftree detected
>> booting Linux kernel with devicetree
>>
>> ...dead...
>>
>> Does every process have a "mm"? Even Kernel threads?
I've added a check for "mm". Boots now and my test runs stable for 3
minutes now.
I'm not sure if we have to check for "mm" in
check_and_switch_context(), too.
Thanks,
Marc
---
>From 306d84d5f0645a86e86d539be0546c4ac758d3d4 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu, 20 Jun 2013 12:12:55 +0100
Subject: [PATCH] arm: Fix deferred mm switch on VIVT processors
As of commit b9d4d42ad9 (ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on
pre-ARMv6 CPUs), the mm switching on VIVT processors is done in the
finish_arch_post_lock_switch() function to avoid whole cache flushing
with interrupts disabled. The need for deferred mm switch is stored as a
thread flag (TIF_SWITCH_MM). However, with preemption enabled, we can
have another thread switch before finish_arch_post_lock_switch(). If the
new thread has the same mm as the previous 'next' thread, the scheduler
will not call switch_mm() and the TIF_SWITCH_MM flag won't be set for
the new thread.
This patch moves the switch pending flag to the mm_context_t structure
since this is specific to the mm rather than thread.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
[mkl: add check for mm]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
arch/arm/include/asm/mmu.h | 2 ++
arch/arm/include/asm/mmu_context.h | 8 +++++---
arch/arm/include/asm/thread_info.h | 1 -
3 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index e3d5554..d1b4998 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -6,6 +6,8 @@
typedef struct {
#ifdef CONFIG_CPU_HAS_ASID
atomic64_t id;
+#else
+ int switch_pending;
#endif
unsigned int vmalloc_seq;
} mm_context_t;
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index a7b85e0..9503a7b 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -47,7 +47,7 @@ static inline void check_and_switch_context(struct mm_struct *mm,
* on non-ASID CPUs, the old mm will remain valid until the
* finish_arch_post_lock_switch() call.
*/
- set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM);
+ mm->context.switch_pending = 1;
else
cpu_switch_mm(mm->pgd, mm);
}
@@ -56,9 +56,11 @@ static inline void check_and_switch_context(struct mm_struct *mm,
finish_arch_post_lock_switch
static inline void finish_arch_post_lock_switch(void)
{
- if (test_and_clear_thread_flag(TIF_SWITCH_MM)) {
- struct mm_struct *mm = current->mm;
+ struct mm_struct *mm = current->mm;
+
+ if (mm && mm->context.switch_pending) {
cpu_switch_mm(mm->pgd, mm);
+ mm->context.switch_pending = 0;
}
}
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 1995d1a..f00b569 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -156,7 +156,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
#define TIF_USING_IWMMXT 17
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
#define TIF_RESTORE_SIGMASK 20
-#define TIF_SWITCH_MM 22 /* deferred switch_mm */
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 259 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130620/d76998d0/attachment-0001.sig>
next prev parent reply other threads:[~2013-06-20 11:47 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-20 8:43 BUG: commit "ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on pre-ARMv6 CPUs" breaks armv5 with CONFIG_PREEMPT Marc Kleine-Budde
2013-06-20 9:25 ` Will Deacon
2013-06-20 9:51 ` Marc Kleine-Budde
2013-06-20 9:57 ` Catalin Marinas
2013-06-20 10:08 ` Marc Kleine-Budde
2013-06-20 10:14 ` Marc Kleine-Budde
2013-06-20 10:28 ` Catalin Marinas
2013-06-20 11:12 ` Catalin Marinas
2013-06-20 11:35 ` Marc Kleine-Budde
2013-06-20 11:39 ` Marc Kleine-Budde
2013-06-20 11:47 ` Marc Kleine-Budde [this message]
2013-06-20 12:48 ` Marc Kleine-Budde
2013-06-20 13:01 ` Catalin Marinas
2013-06-20 13:05 ` Marc Kleine-Budde
2013-06-21 10:28 ` Marc Kleine-Budde
2013-06-21 13:52 ` Catalin Marinas
2013-07-17 8:41 ` Marc Kleine-Budde
2013-07-17 8:51 ` Russell King - ARM Linux
2013-07-17 11:48 ` Marc Kleine-Budde
2013-07-17 19:41 ` Catalin Marinas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51C2EBCD.4070206@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).