[GIT PULL] at91: Device Tree updates for 3.11 #3

[nicolas.ferre@atmel.com (Nicolas Ferre)]

On 26/06/2013 16:57, Arnd Bergmann :
> On Wednesday 26 June 2013, Nicolas Ferre wrote:
>> Arnd, Olof,
>>
>> One more pull-request for AT91 DT patches.
>> It is focused on SPI on several SoCs and it particular the SPI+DMA addition on newer
>> SAMA5D3 and AT91SAM9N12.
>
> Pulled into next/dt, thanks! I've performed the simple merge below.

Your merge is correct. Thanks a lot Arnd.

Bye,

> diff --cc arch/arm/boot/dts/sama5d3.dtsi
> index bbf88d7,5956f9b..a1d5e25
> --- a/arch/arm/boot/dts/sama5d3.dtsi
> +++ b/arch/arm/boot/dts/sama5d3.dtsi
> @@@ -80,9 -76,17 +80,12 @@@
>    			spi0: spi at f0004000 {
>    				#address-cells = <1>;
>    				#size-cells = <0>;
> - 				compatible = "atmel,at91sam9x5-spi";
> + 				compatible = "atmel,at91rm9200-spi";
>    				reg = <0xf0004000 0x100>;
>    				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
>   -				cs-gpios = <&pioD 13 0
>   -					    &pioD 14 0 /* conflicts with SCK0 and CANRX0 */
>   -					    &pioD 15 0 /* conflicts with CTS0 and CANTX0 */
>   -					    &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */
>   -					   >;
> + 				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>,
> + 				       <&dma0 2 AT91_DMA_CFG_PER_ID(2)>;
> + 				dma-names = "tx", "rx";
>    				pinctrl-names = "default";
>    				pinctrl-0 = <&pinctrl_spi0>;
>    				status = "disabled";
> @@@ -203,9 -207,17 +206,12 @@@
>    			spi1: spi at f8008000 {
>    				#address-cells = <1>;
>    				#size-cells = <0>;
> - 				compatible = "atmel,at91sam9x5-spi";
> + 				compatible = "atmel,at91rm9200-spi";
>    				reg = <0xf8008000 0x100>;
>    				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
>   -				cs-gpios = <&pioC 25 0
>   -					    &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */
>   -					    &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */
>   -					    &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */
>   -					   >;
> + 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>,
> + 				       <&dma1 2 AT91_DMA_CFG_PER_ID(16)>;
> + 				dma-names = "tx", "rx";
>    				pinctrl-names = "default";
>    				pinctrl-0 = <&pinctrl_spi1>;
>    				status = "disabled";
>
>
>


-- 
Nicolas Ferre