From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 5/7] ARM: kirkwood: remove redundant DT board files
Date: Wed, 03 Jul 2013 01:29:56 +0200 [thread overview]
Message-ID: <51D36274.6020204@gmail.com> (raw)
In-Reply-To: <87k3l8v9s1.fsf@natisbad.org>
On 07/03/2013 01:09 AM, Arnaud Ebalard wrote:
> Hi Sebastian,
>
> Sebastian Hesselbarth<sebastian.hesselbarth@gmail.com> writes:
>
>> With DT support for mv643xx_eth board specific init for some boards now
>> is unneccessary. Remove those board files, Kconfig entries, and
>> corresponding entries in kirkwood_defconfig.
>
> Applying above your set an old quilt cleaning patch Jason asked at some
> point, it became empty except for arch/arm/mach_kirkwood/common.h in
> which some declarations were left behind. If this is correct, can you
> just merge the hunks below in your 5/7 in next round?
>
> AFAICT, only dnskw_init() remains, which matches the list of board-*.c
> files in arch/arm/mach_kirkwood/ (i.e. board-dt.c and board-dnskw.c).
Arnaud,
thanks for sending this! I will squash it into v6 and send a v7 of this
patch. Looks like ARM SoC pull request causes some issues with Russell's
tree, so there is plenty of time left to resend (and re-test :))
And you are right, only board-dt.c and board-dnskw.c remain in
mach-kirkwood. With irqchip/clocksource patches in, IMHO kirkwood is
quite ready for mach-mvebu. mach-dove is still missing DT pcie, and I
haven't had any success to get my hands on a board with pcie to test,
yet.
Sebastian
> Signed-off-by: Arnaud Ebalard<arno@natisbad.org>
> ---
> arch/arm/mach-kirkwood/common.h | 108 ----------------------------------------
> 1 file changed, 108 deletions(-)
>
> diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
> index 1c09f3f..1cbdd2b 100644
> --- a/arch/arm/mach-kirkwood/common.h
> +++ b/arch/arm/mach-kirkwood/common.h
> @@ -57,26 +57,6 @@ void kirkwood_restart(char, const char *);
> void kirkwood_clk_init(void);
>
> /* board init functions for boards not fully converted to fdt */
> -#ifdef CONFIG_MACH_DREAMPLUG_DT
> -void dreamplug_init(void);
> -#else
> -static inline void dreamplug_init(void) {};
> -#endif
> -#ifdef CONFIG_MACH_GURUPLUG_DT
> -void guruplug_dt_init(void);
> -#else
> -static inline void guruplug_dt_init(void) {};
> -#endif
> -#ifdef CONFIG_MACH_SHEEVAPLUG_DT
> -void sheevaplug_dt_init(void);
> -#else
> -static inline void sheevaplug_dt_init(void) {};
> -#endif
> -#ifdef CONFIG_MACH_TS219_DT
> -void qnap_dt_ts219_init(void);
> -#else
> -static inline void qnap_dt_ts219_init(void) {};
> -#endif
>
> #ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT
> void dnskw_init(void);
> @@ -84,94 +64,6 @@ void dnskw_init(void);
> static inline void dnskw_init(void) {};
> #endif
>
> -#ifdef CONFIG_MACH_ICONNECT_DT
> -void iconnect_init(void);
> -#else
> -static inline void iconnect_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_IB62X0_DT
> -void ib62x0_init(void);
> -#else
> -static inline void ib62x0_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_DOCKSTAR_DT
> -void dockstar_dt_init(void);
> -#else
> -static inline void dockstar_dt_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_GOFLEXNET_DT
> -void goflexnet_init(void);
> -#else
> -static inline void goflexnet_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_LSXL_DT
> -void lsxl_init(void);
> -#else
> -static inline void lsxl_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
> -void iomega_ix2_200_init(void);
> -#else
> -static inline void iomega_ix2_200_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
> -void km_kirkwood_init(void);
> -#else
> -static inline void km_kirkwood_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_DB88F628X_BP_DT
> -void db88f628x_init(void);
> -#else
> -static inline void db88f628x_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_MPLCEC4_DT
> -void mplcec4_init(void);
> -#else
> -static inline void mplcec4_init(void) {};
> -#endif
> -
> -#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
> - defined(CONFIG_MACH_NETSPACE_V2_DT) || \
> - defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \
> - defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \
> - defined(CONFIG_MACH_NETSPACE_MINI_V2_DT)
> -void ns2_init(void);
> -#else
> -static inline void ns2_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT
> -void openblocks_a6_init(void);
> -#else
> -static inline void openblocks_a6_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_READYNAS_DT
> -void netgear_readynas_init(void);
> -#else
> -static inline void netgear_readynas_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_TOPKICK_DT
> -void usi_topkick_init(void);
> -#else
> -static inline void usi_topkick_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_CLOUDBOX_DT
> -void cloudbox_init(void);
> -#else
> -static inline void cloudbox_init(void) {};
> -#endif
> -
> /* early init functions not converted to fdt yet */
> char *kirkwood_id(void);
> void kirkwood_l2_init(void);
next prev parent reply other threads:[~2013-07-02 23:29 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-02 11:00 [PATCH v6 0/7] ARM: mvebu: switch to DT probed mv643xx_eth Sebastian Hesselbarth
2013-07-02 11:00 ` [PATCH v6 1/7] ARM: dove: add gigabit ethernet and mvmdio device tree nodes Sebastian Hesselbarth
2013-07-02 11:00 ` [PATCH v6 2/7] ARM: kirkwood: " Sebastian Hesselbarth
2013-07-07 20:34 ` [PATCH v7 " Sebastian Hesselbarth
2013-07-02 11:00 ` [PATCH v6 3/7] ARM: orion5x: " Sebastian Hesselbarth
2013-07-02 11:00 ` [PATCH v6 4/7] ARM: dove: remove legacy mv643xx_eth setup Sebastian Hesselbarth
2013-07-02 11:00 ` [PATCH v6 5/7] ARM: kirkwood: remove redundant DT board files Sebastian Hesselbarth
2013-07-02 23:09 ` Arnaud Ebalard
2013-07-02 23:29 ` Sebastian Hesselbarth [this message]
2013-07-03 11:31 ` Sebastian Hesselbarth
2013-07-03 14:33 ` Jason Cooper
2013-07-03 14:40 ` Jason Cooper
2013-07-03 16:57 ` [PATCH v7 " Sebastian Hesselbarth
2013-07-02 11:00 ` [PATCH v6 6/7] ARM: kirkwood: remove legacy clk alias for mv643xx_eth Sebastian Hesselbarth
2013-07-02 11:00 ` [PATCH v6 7/7] ARM: orion5x: remove legacy mv643xx_eth board setup Sebastian Hesselbarth
2013-07-25 17:11 ` [PATCH v6 0/7] ARM: mvebu: switch to DT probed mv643xx_eth Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51D36274.6020204@gmail.com \
--to=sebastian.hesselbarth@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).