[PATCH v2] arm: dts: AM43x: Add usb_otg_hs node

[sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)]

Hello.

On 09-07-2013 13:17, George Cherian wrote:

> Adds device node for HS USB Host module for AM437x

> changes from v1

> renamed synopsis to snps
> removed flag tx-fifo-resize

> Signed-off-by: George Cherian <george.cherian@ti.com>
> ---
>   arch/arm/boot/dts/am4372.dtsi | 18 ++++++++++++++++++
>   1 file changed, 18 insertions(+)

> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
> index ddc1df7..c9e0da8 100644
> --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -64,5 +64,23 @@
>   			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
>   			reg = <0x44e86000 0x40>;
>   		};
> +
> +		usb_otg_hs1: am4372_dwc3 at 48380000 {

    See http://www.devicetree.org/Device_Tree_Usage, "Node Names" section.

> +			compatible = "ti,am437x-dwc3";
> +			reg = <0x48380000 0x1ff>;
> +			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			utmi-mode = <1>;
> +			ranges;
> +
> +			dwc3 at 48390000 {

    The same comment.

> +				compatible = "snps,dwc3";
> +				reg = <0x48390000 0xcfff>;
> +				interrupts = <GIC_SPI  168 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +
> +		};
> +		

WBR, Sergei