From mboxrd@z Thu Jan  1 00:00:00 1970
From: tibor@harsszegi.com (Tibor Harsszegi)
Date: Wed, 10 Jul 2013 18:57:16 +0200
Subject: NSA310 + DT
In-Reply-To: <20130710165342.GA31692@lunn.ch>
References: <51DC564A.8050002@harsszegi.com> <20130709193605.GC26223@lunn.ch>
 <20130709202143.GD26223@lunn.ch>
 <2544f179ed4349545a25aa60d52a664a@harsszegi.com>
 <20130710134119.GA30885@lunn.ch> <51DD8E8B.2040505@harsszegi.com>
 <20130710165342.GA31692@lunn.ch>
Message-ID: <51DD926C.1010205@harsszegi.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Cool, keep you posted.
> On Wed, Jul 10, 2013 at 06:40:43PM +0200, Tibor Harsszegi wrote:
>> Hello Andrew,
>>
>> I did a:
>>
>> ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make clean
>> ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make kirkwood_defconfig
>> ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make zImage
>> ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make dtbs
>> cat arch/arm/boot/zImage arch/arm/boot/dts/kirkwood-nsa310-tdc.dtb > /tmp/X
>> mv /tmp/X arch/arm/boot/zImage
>> ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make uImage
>> ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make modules
>>
>> [attached .config]
>>
>> copied the uImage over the NSA310, rebooted.
>> Good news: console is back
> Great. Probably was OF_SERIAL_PLATFORM
>
>> Bad news: LEDs still don't work (all green), kernel stops (tried
>> forcing rootfstype=ext4, didn't help)
> Ah, O.k. EXT4 is not part of kirkwood_defconfig. Hence it cannot mount
> the root fs.
>
> Please could you use make menuconfig and include it into the kernel
> image. I will also update the patch later.
>
> LEDs are not working because the GPIO driver is not loading.
> I will see if i can spot an obvious typo etc.
>
>    Andrew