[PATCH 1/2] Revert "ARM: OMAP2+: Fix serial init for device tree based booting"

[rnayak@ti.com (Rajendra Nayak)]

On Friday 12 July 2013 12:50 PM, Tony Lindgren wrote:
> * Rajendra Nayak <rnayak@ti.com> [130711 03:59]:
>> This reverts commit 82702ea11ddfe0e43382e1fa5b66d807d8114916.
>>
>> The above commit stubbed out omap_serial_early_init() in case of
>> DT build thinking it was doing the serial port initializations.
> 
> Well not really. It was done to cut dependency between device
> tree initialized drivers and pdata initialized drivers.
>  
>> omap_serial_early_init() however does not do the serial port
>> inits (its instead done by omap_serial_init_port()) instead
>> it sets the HWMOD_INIT_NO_IDLE and HWMOD_INIT_NO_RESET flags
>> for the console uart which causes hwmod to avoid doing a reset
>> followed by the idling of the console uart.
>>
>> This is still needed even in the DT case.
> 
> This fix is going the wrong way.
> 
> The console is working fine with DT based booting for me,
> except for the earlyprintk fix needed.

It works on omap4 and omap5. It won't work on any
am33xx devices.

> 
> And there should not be any need to parse cmdline for console
> as omap-serial.c sets it up and already knows about it.
> 
> Care to state what exactly this attempts to fix and for which
> omaps? If this is only needed for am33xx, then why?

Yes, this is needed only for am33xx because am33xx hwmod rightly
had the hwmod flags for NO_IDLE and NO_RESET removed and omap4
and omap5 wrongly still carry them around.

Just try applying PATCH 2/2 of this series and it won't work on the
omap4 sdp anymore.

regards,
Rajendra

> 
> Regards,
> 
> Tony
>  
>> Signed-off-by: Rajendra Nayak <rnayak@ti.com>
>> Reported-by: Mark Jackson <mpfj-list@newflow.co.uk>
>> Reported-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
>> ---
>>  arch/arm/mach-omap2/serial.c |    3 ---
>>  1 file changed, 3 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
>> index 3a674de..58d5b56 100644
>> --- a/arch/arm/mach-omap2/serial.c
>> +++ b/arch/arm/mach-omap2/serial.c
>> @@ -175,9 +175,6 @@ static char *cmdline_find_option(char *str)
>>  
>>  static int __init omap_serial_early_init(void)
>>  {
>> -	if (of_have_populated_dt())
>> -		return -ENODEV;
>> -
>>  	do {
>>  		char oh_name[MAX_UART_HWMOD_NAME_LEN];
>>  		struct omap_hwmod *oh;
>> -- 
>> 1.7.9.5
>>