From: ml@communistcode.co.uk (Jack Mitchell)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/4] Enable ethernet support for SOCFPGA
Date: Thu, 18 Jul 2013 10:16:47 +0100 [thread overview]
Message-ID: <51E7B27F.2000304@communistcode.co.uk> (raw)
In-Reply-To: <1374102623-4154-1-git-send-email-dinguyen@altera.com>
On 18/07/13 00:10, dinguyen at altera.com wrote:
> From: Dinh Nguyen <dinguyen@altera.com>
>
> Hello,
>
> These 4 patches are meant to enable ethernet and SD/MMC for the SOCFPGA
> platform.
>
> patch (1/4): Adds select ARM_TWD for the platform
> patch (2/4): Add platform specific initialization for the ethernet controller.
> patch (3/4): Commit 25c83b5c2 added "snps,phy-addr" for getting the PHY addr.
> Set the ethernet clocks to be emac_0_clk and emac_1_clk so it be gated.
> patch (4/4): Update defconfig to support SD/MMC, ethernet, EXT3 and NFS.
>
> Thanks,
>
> Dinh Nguyen (4):
> arm: socfpga: Enable ARM_TWD for socfpga
> arm: socfpga: Add platform initialization for ethernet
> ARM: socfpga: dts: Fix entries for the ethernet entries.
> arm: socfpga: Add support for SD/MMC and ethernet to defconfig
>
> arch/arm/boot/dts/socfpga.dtsi | 4 +-
> arch/arm/boot/dts/socfpga_cyclone5.dts | 2 +-
> arch/arm/configs/socfpga_defconfig | 8 +++
> arch/arm/mach-socfpga/Kconfig | 1 +
> arch/arm/mach-socfpga/core.h | 8 +++
> arch/arm/mach-socfpga/socfpga.c | 85 +++++++++++++++++++++++++++++++-
> 6 files changed, 104 insertions(+), 4 deletions(-)
>
> CC: Arnd Bergmann <arnd@arndb.de>
> CC: Olof Johansson <olof@lixom.net>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Cc: Pavel Machek <pavel@denx.de>
> Cc: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
>
Hi Dinh,
What tree is this based against, or what patches are a pre-requisite to
this series? I applied the patches to linux-arm/master but the compile
failed.
arch/arm/mach-socfpga/socfpga.c: In function 'ksz9021rlrn_phy_fixup':
arch/arm/mach-socfpga/socfpga.c:85:21: error:
'MICREL_KSZ9021_EXTREG_CTRL' undeclared (first use in this function)
phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
^
arch/arm/mach-socfpga/socfpga.c:85:21: note: each undeclared identifier
is reported only once for each function it appears in
arch/arm/mach-socfpga/socfpga.c:86:4: error:
'MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW' undeclared (first use in this
function)
MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000);
^
arch/arm/mach-socfpga/socfpga.c:87:21: error:
'MICREL_KSZ9021_EXTREG_DATA_WRITE' undeclared (first use in this function)
phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000);
^
arch/arm/mach-socfpga/socfpga.c:91:4: error:
'MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW' undeclared (first use in this
function)
MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000);
^
arch/arm/mach-socfpga/socfpga.c: In function 'socfpga_cyclone5_init':
arch/arm/mach-socfpga/socfpga.c:193:30: error: 'PHY_ID_KSZ9021RLRN'
undeclared (first use in this function)
phy_register_fixup_for_uid(PHY_ID_KSZ9021RLRN,
^
Cheers,
Jack.
--
Jack Mitchell (jack at embed.me.uk)
Embedded Systems Engineer
http://www.embed.me.uk
--
next prev parent reply other threads:[~2013-07-18 9:16 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-17 23:10 [PATCH 0/4] Enable ethernet support for SOCFPGA dinguyen at altera.com
2013-07-17 23:10 ` [PATCH 1/4] arm: socfpga: Enable ARM_TWD for socfpga dinguyen at altera.com
2013-07-17 23:10 ` [PATCH 2/4] arm: socfpga: Add platform initialization for ethernet dinguyen at altera.com
2013-07-17 23:10 ` [PATCH 3/4] ARM: socfpga: dts: Fix entries for the ethernet entries dinguyen at altera.com
2013-07-17 23:10 ` [PATCH 4/4] arm: socfpga: Add support for SD/MMC and ethernet to defconfig dinguyen at altera.com
2013-07-18 9:16 ` Jack Mitchell [this message]
2013-07-18 11:35 ` [PATCH 0/4] Enable ethernet support for SOCFPGA Jack Mitchell
2013-07-18 11:59 ` Pavel Machek
2013-07-18 13:12 ` Dinh Nguyen
2013-07-18 13:38 ` Jack Mitchell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51E7B27F.2000304@communistcode.co.uk \
--to=ml@communistcode.co.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).