From mboxrd@z Thu Jan  1 00:00:00 1970
From: sr@denx.de (Stefan Roese)
Date: Thu, 18 Jul 2013 11:40:42 +0200
Subject: [PATCH] ARM: omap2: fix musb usage for n8x0
In-Reply-To: <51E7B2FA.7020206@ti.com>
References: <1374000777-5626-1-git-send-email-zonque@gmail.com>
 <51E7B1FF.6000301@denx.de> <51E7B2FA.7020206@ti.com>
Message-ID: <51E7B81A.70103@denx.de>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 07/18/2013 11:18 AM, Kishon Vijay Abraham I wrote:
>> I'm testing musb as OTG on beagleboard (old one, not Beagle-xm). And
>> using the latest kernel.org version with this patch applied I see the
>> following messages while booting (repeatedly):
>>
>> [    4.998168] usb usb1: bus auto-suspend, wakeup 1
>> [    5.003112] musb_bus_suspend 2457: trying to suspend as b_idle while active
>> [    5.010498] usb usb1: bus suspend fail, err -16
>> [    5.015289] hub 1-0:1.0: hub_resume
>> [    5.019073] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
>> [    5.024963] hub 1-0:1.0: hub_suspend
>> [    5.028778] usb usb1: bus auto-suspend, wakeup 1
>> ...
>>
>> This is without a cable connected to the OTG port.
>>
>> Any ideas what might be missing here?
> 
> Even I observed these prints when I have dual mode enabled. When kept as gadget
> only mode I dint see these prints.

Yes. With gadget-only I don't see those messages. Thanks for the hint.

> However if you connect a cable, you should still see that enumeration should
> succeed.
> Not sure why those prints come though :-s

No. When configured as dual-role these endless messages are still there
with a cable connected to the PC USB host port (musb gadget mode).

Thanks,
Stefan