From mboxrd@z Thu Jan 1 00:00:00 1970 From: daniel.lezcano@linaro.org (Daniel Lezcano) Date: Tue, 30 Jul 2013 12:04:59 +0200 Subject: [PATCH v4 07/17] clocksource: bcm2835: Switch to sched_clock_register() In-Reply-To: <1374189690-10810-8-git-send-email-sboyd@codeaurora.org> References: <1374189690-10810-1-git-send-email-sboyd@codeaurora.org> <1374189690-10810-8-git-send-email-sboyd@codeaurora.org> Message-ID: <51F78FCB.2020004@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 07/19/2013 01:21 AM, Stephen Boyd wrote: > The 32 bit sched_clock interface now supports 64 bits. Upgrade to > the 64 bit function to allow us to remove the 32 bit registration > interface. > > Cc: Stephen Warren > Signed-off-by: Stephen Boyd > --- Hi Stephen, you sent a series with tick and clocksource changes. John is recipient of part of them. I replaced him to maintain the clocksource drivers. Is the series you sent for clocksource drivers supposed to be taken by me or by Russell ? In the future if there are no dependencies, it would be preferable to group the clocksource drivers changes into a series and send them to me. Thanks -- Daniel > drivers/clocksource/bcm2835_timer.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c > index 07ea7ce..26ed331 100644 > --- a/drivers/clocksource/bcm2835_timer.c > +++ b/drivers/clocksource/bcm2835_timer.c > @@ -49,7 +49,7 @@ struct bcm2835_timer { > > static void __iomem *system_clock __read_mostly; > > -static u32 notrace bcm2835_sched_read(void) > +static u64 notrace bcm2835_sched_read(void) > { > return readl_relaxed(system_clock); > } > @@ -110,7 +110,7 @@ static void __init bcm2835_timer_init(struct device_node *node) > panic("Can't read clock-frequency"); > > system_clock = base + REG_COUNTER_LO; > - setup_sched_clock(bcm2835_sched_read, 32, freq); > + sched_clock_register(bcm2835_sched_read, 32, freq); > > clocksource_mmio_init(base + REG_COUNTER_LO, node->name, > freq, 300, 32, clocksource_mmio_readl_up); > -- Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog