* [GIT PULL] Highbank fixes for 3.12
@ 2013-08-14 3:01 Rob Herring
2013-08-14 16:04 ` Kevin Hilman
0 siblings, 1 reply; 6+ messages in thread
From: Rob Herring @ 2013-08-14 3:01 UTC (permalink / raw)
To: linux-arm-kernel
Kevin, Olof,
Please pull highbank updates for 3.12.
There's one trivial core ARM code change in the series to allow a
DMA_ZONE size of 4GB. I believe this should not conflict with Russell's
DMA mask series.
Rob
The following changes since commit d4e4ab86bcba5a72779c43dc1459f71fea3d89c8:
Linux 3.11-rc5 (2013-08-11 18:04:20 -0700)
are available in the git repository at:
git://sources.calxeda.com/kernel/linux.git
tags/highbank-lpae-fixes-for-3.12
for you to fetch changes up to ce3ec1d61c5ed6af3ceaace6f57acd588c41b4d6:
ARM: highbank: fix debug uart virtual address for LPAE (2013-08-13
20:50:16 -0500)
----------------------------------------------------------------
A set of fixes for highbank to enable LPAE and selecting of necesssary
ARM errata.
----------------------------------------------------------------
Rob Herring (6):
ARM: use phys_addr_t for DMA zone sizes
ARM: highbank: enable DMA zone for LPAE
ARM: highbank: select ARCH_HAS_HOLES_MEMORYMODEL
ARM: highbank: select required errata work-arounds
ARM: highbank: select ARCH_DMA_ADDR_T_64BIT for LPAE
ARM: highbank: fix debug uart virtual address for LPAE
arch/arm/include/asm/mach/arch.h | 2 +-
arch/arm/include/debug/highbank.S | 2 +-
arch/arm/mach-highbank/Kconfig | 6 ++++++
arch/arm/mach-highbank/highbank.c | 3 +++
arch/arm/mm/init.c | 2 +-
5 files changed, 12 insertions(+), 3 deletions(-)
^ permalink raw reply [flat|nested] 6+ messages in thread* [GIT PULL] Highbank fixes for 3.12
2013-08-14 3:01 [GIT PULL] Highbank fixes for 3.12 Rob Herring
@ 2013-08-14 16:04 ` Kevin Hilman
2013-08-14 18:50 ` Rob Herring
0 siblings, 1 reply; 6+ messages in thread
From: Kevin Hilman @ 2013-08-14 16:04 UTC (permalink / raw)
To: linux-arm-kernel
Hi Rob,
Rob Herring <robherring2@gmail.com> writes:
> Kevin, Olof,
>
> Please pull highbank updates for 3.12.
>
> There's one trivial core ARM code change in the series to allow a
> DMA_ZONE size of 4GB. I believe this should not conflict with Russell's
> DMA mask series.
>
> Rob
>
> The following changes since commit d4e4ab86bcba5a72779c43dc1459f71fea3d89c8:
>
> Linux 3.11-rc5 (2013-08-11 18:04:20 -0700)
>
> are available in the git repository at:
>
> git://sources.calxeda.com/kernel/linux.git
> tags/highbank-lpae-fixes-for-3.12
>
> for you to fetch changes up to ce3ec1d61c5ed6af3ceaace6f57acd588c41b4d6:
>
> ARM: highbank: fix debug uart virtual address for LPAE (2013-08-13
> 20:50:16 -0500)
>
> ----------------------------------------------------------------
> A set of fixes for highbank to enable LPAE and selecting of necesssary
> ARM errata.
>
> ----------------------------------------------------------------
> Rob Herring (6):
> ARM: use phys_addr_t for DMA zone sizes
> ARM: highbank: enable DMA zone for LPAE
> ARM: highbank: select ARCH_HAS_HOLES_MEMORYMODEL
> ARM: highbank: select required errata work-arounds
> ARM: highbank: select ARCH_DMA_ADDR_T_64BIT for LPAE
This one seems to have broken the AMBA PL08x DMA driver, and is still
objected to by Russell, so I'll drop this one for now.
> ARM: highbank: fix debug uart virtual address for LPAE
The rest look OK and I can pull them if the rest are OK without the
objectionable one. Let me know if that's OK, or you prefer to wait for
resolution.
Kevin
> arch/arm/include/asm/mach/arch.h | 2 +-
> arch/arm/include/debug/highbank.S | 2 +-
> arch/arm/mach-highbank/Kconfig | 6 ++++++
> arch/arm/mach-highbank/highbank.c | 3 +++
> arch/arm/mm/init.c | 2 +-
> 5 files changed, 12 insertions(+), 3 deletions(-)
^ permalink raw reply [flat|nested] 6+ messages in thread
* [GIT PULL] Highbank fixes for 3.12
2013-08-14 16:04 ` Kevin Hilman
@ 2013-08-14 18:50 ` Rob Herring
2013-08-14 19:55 ` Kevin Hilman
0 siblings, 1 reply; 6+ messages in thread
From: Rob Herring @ 2013-08-14 18:50 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Aug 14, 2013 at 11:04 AM, Kevin Hilman <khilman@linaro.org> wrote:
> Hi Rob,
>
> Rob Herring <robherring2@gmail.com> writes:
>
>> Kevin, Olof,
>>
>> Please pull highbank updates for 3.12.
>>
>> There's one trivial core ARM code change in the series to allow a
>> DMA_ZONE size of 4GB. I believe this should not conflict with Russell's
>> DMA mask series.
>>
>> Rob
>>
>> The following changes since commit d4e4ab86bcba5a72779c43dc1459f71fea3d89c8:
>>
>> Linux 3.11-rc5 (2013-08-11 18:04:20 -0700)
>>
>> are available in the git repository at:
>>
>> git://sources.calxeda.com/kernel/linux.git
>> tags/highbank-lpae-fixes-for-3.12
>>
>> for you to fetch changes up to ce3ec1d61c5ed6af3ceaace6f57acd588c41b4d6:
>>
>> ARM: highbank: fix debug uart virtual address for LPAE (2013-08-13
>> 20:50:16 -0500)
>>
>> ----------------------------------------------------------------
>> A set of fixes for highbank to enable LPAE and selecting of necesssary
>> ARM errata.
>>
>> ----------------------------------------------------------------
>> Rob Herring (6):
>> ARM: use phys_addr_t for DMA zone sizes
>> ARM: highbank: enable DMA zone for LPAE
>> ARM: highbank: select ARCH_HAS_HOLES_MEMORYMODEL
>> ARM: highbank: select required errata work-arounds
>> ARM: highbank: select ARCH_DMA_ADDR_T_64BIT for LPAE
>
> This one seems to have broken the AMBA PL08x DMA driver, and is still
> objected to by Russell, so I'll drop this one for now.
Exynos does the same selection, but I guess it is not multi-platform
though and doesn't select ARM_AMBA.
>> ARM: highbank: fix debug uart virtual address for LPAE
>
> The rest look OK and I can pull them if the rest are OK without the
> objectionable one. Let me know if that's OK, or you prefer to wait for
> resolution.
Yes, I'm fine with dropping this one for now.
Rob
^ permalink raw reply [flat|nested] 6+ messages in thread
* [GIT PULL] Highbank fixes for 3.12
2013-08-14 18:50 ` Rob Herring
@ 2013-08-14 19:55 ` Kevin Hilman
2013-08-15 15:01 ` Kevin Hilman
0 siblings, 1 reply; 6+ messages in thread
From: Kevin Hilman @ 2013-08-14 19:55 UTC (permalink / raw)
To: linux-arm-kernel
Rob Herring <robherring2@gmail.com> writes:
> On Wed, Aug 14, 2013 at 11:04 AM, Kevin Hilman <khilman@linaro.org> wrote:
>> Hi Rob,
>>
>> Rob Herring <robherring2@gmail.com> writes:
>>
>>> Kevin, Olof,
>>>
>>> Please pull highbank updates for 3.12.
>>>
>>> There's one trivial core ARM code change in the series to allow a
>>> DMA_ZONE size of 4GB. I believe this should not conflict with Russell's
>>> DMA mask series.
>>>
>>> Rob
>>>
>>> The following changes since commit d4e4ab86bcba5a72779c43dc1459f71fea3d89c8:
>>>
>>> Linux 3.11-rc5 (2013-08-11 18:04:20 -0700)
>>>
>>> are available in the git repository at:
>>>
>>> git://sources.calxeda.com/kernel/linux.git
>>> tags/highbank-lpae-fixes-for-3.12
>>>
>>> for you to fetch changes up to ce3ec1d61c5ed6af3ceaace6f57acd588c41b4d6:
>>>
>>> ARM: highbank: fix debug uart virtual address for LPAE (2013-08-13
>>> 20:50:16 -0500)
>>>
>>> ----------------------------------------------------------------
>>> A set of fixes for highbank to enable LPAE and selecting of necesssary
>>> ARM errata.
>>>
>>> ----------------------------------------------------------------
>>> Rob Herring (6):
>>> ARM: use phys_addr_t for DMA zone sizes
>>> ARM: highbank: enable DMA zone for LPAE
>>> ARM: highbank: select ARCH_HAS_HOLES_MEMORYMODEL
>>> ARM: highbank: select required errata work-arounds
>>> ARM: highbank: select ARCH_DMA_ADDR_T_64BIT for LPAE
>>
>> This one seems to have broken the AMBA PL08x DMA driver, and is still
>> objected to by Russell, so I'll drop this one for now.
>
> Exynos does the same selection, but I guess it is not multi-platform
> though and doesn't select ARM_AMBA.
>
>>> ARM: highbank: fix debug uart virtual address for LPAE
>>
>> The rest look OK and I can pull them if the rest are OK without the
>> objectionable one. Let me know if that's OK, or you prefer to wait for
>> resolution.
>
> Yes, I'm fine with dropping this one for now.
OK, dropped that one and applied the rest.
Kevin
^ permalink raw reply [flat|nested] 6+ messages in thread
* [GIT PULL] Highbank fixes for 3.12
2013-08-14 19:55 ` Kevin Hilman
@ 2013-08-15 15:01 ` Kevin Hilman
2013-08-15 20:51 ` Rob Herring
0 siblings, 1 reply; 6+ messages in thread
From: Kevin Hilman @ 2013-08-15 15:01 UTC (permalink / raw)
To: linux-arm-kernel
Kevin Hilman <khilman@linaro.org> writes:
> Rob Herring <robherring2@gmail.com> writes:
>
>> On Wed, Aug 14, 2013 at 11:04 AM, Kevin Hilman <khilman@linaro.org> wrote:
>>> Hi Rob,
>>>
>>> Rob Herring <robherring2@gmail.com> writes:
>>>
>>>> Kevin, Olof,
>>>>
>>>> Please pull highbank updates for 3.12.
>>>>
>>>> There's one trivial core ARM code change in the series to allow a
>>>> DMA_ZONE size of 4GB. I believe this should not conflict with Russell's
>>>> DMA mask series.
>>>>
>>>> Rob
>>>>
>>>> The following changes since commit d4e4ab86bcba5a72779c43dc1459f71fea3d89c8:
>>>>
>>>> Linux 3.11-rc5 (2013-08-11 18:04:20 -0700)
>>>>
>>>> are available in the git repository at:
>>>>
>>>> git://sources.calxeda.com/kernel/linux.git
>>>> tags/highbank-lpae-fixes-for-3.12
>>>>
>>>> for you to fetch changes up to ce3ec1d61c5ed6af3ceaace6f57acd588c41b4d6:
>>>>
>>>> ARM: highbank: fix debug uart virtual address for LPAE (2013-08-13
>>>> 20:50:16 -0500)
>>>>
>>>> ----------------------------------------------------------------
>>>> A set of fixes for highbank to enable LPAE and selecting of necesssary
>>>> ARM errata.
>>>>
>>>> ----------------------------------------------------------------
>>>> Rob Herring (6):
>>>> ARM: use phys_addr_t for DMA zone sizes
>>>> ARM: highbank: enable DMA zone for LPAE
>>>> ARM: highbank: select ARCH_HAS_HOLES_MEMORYMODEL
>>>> ARM: highbank: select required errata work-arounds
>>>> ARM: highbank: select ARCH_DMA_ADDR_T_64BIT for LPAE
>>>
>>> This one seems to have broken the AMBA PL08x DMA driver, and is still
>>> objected to by Russell, so I'll drop this one for now.
>>
>> Exynos does the same selection, but I guess it is not multi-platform
>> though and doesn't select ARM_AMBA.
>>
>>>> ARM: highbank: fix debug uart virtual address for LPAE
>>>
>>> The rest look OK and I can pull them if the rest are OK without the
>>> objectionable one. Let me know if that's OK, or you prefer to wait for
>>> resolution.
>>
>> Yes, I'm fine with dropping this one for now.
>
> OK, dropped that one and applied the rest.
OK, with 2 of the 5 patches still having problems/objections, and the
one causing a new build warning, I've backed out this branch
from for-next.
Could you just respin a branch with the first 3 patches and the fix
folded in? I know I requested the opposite on IRC, but having a new
pull request allows me to include your signed tag on the whole bit
instead of me having to manually massage the branch and merge without a
signed tag.
Thanks,
Kevin
^ permalink raw reply [flat|nested] 6+ messages in thread
* [GIT PULL] Highbank fixes for 3.12
2013-08-15 15:01 ` Kevin Hilman
@ 2013-08-15 20:51 ` Rob Herring
0 siblings, 0 replies; 6+ messages in thread
From: Rob Herring @ 2013-08-15 20:51 UTC (permalink / raw)
To: linux-arm-kernel
On 08/15/2013 10:01 AM, Kevin Hilman wrote:
> Kevin Hilman <khilman@linaro.org> writes:
>
>> Rob Herring <robherring2@gmail.com> writes:
>>
>>> On Wed, Aug 14, 2013 at 11:04 AM, Kevin Hilman <khilman@linaro.org> wrote:
>>>> Hi Rob,
>>>>
>>>> Rob Herring <robherring2@gmail.com> writes:
>>>>
>>>>> Kevin, Olof,
>>>>>
>>>>> Please pull highbank updates for 3.12.
>>>>>
>>>>> There's one trivial core ARM code change in the series to allow a
>>>>> DMA_ZONE size of 4GB. I believe this should not conflict with Russell's
>>>>> DMA mask series.
>>>>>
>>>>> Rob
>>>>>
>>>>> The following changes since commit d4e4ab86bcba5a72779c43dc1459f71fea3d89c8:
>>>>>
>>>>> Linux 3.11-rc5 (2013-08-11 18:04:20 -0700)
>>>>>
>>>>> are available in the git repository at:
>>>>>
>>>>> git://sources.calxeda.com/kernel/linux.git
>>>>> tags/highbank-lpae-fixes-for-3.12
>>>>>
>>>>> for you to fetch changes up to ce3ec1d61c5ed6af3ceaace6f57acd588c41b4d6:
>>>>>
>>>>> ARM: highbank: fix debug uart virtual address for LPAE (2013-08-13
>>>>> 20:50:16 -0500)
>>>>>
>>>>> ----------------------------------------------------------------
>>>>> A set of fixes for highbank to enable LPAE and selecting of necesssary
>>>>> ARM errata.
>>>>>
>>>>> ----------------------------------------------------------------
>>>>> Rob Herring (6):
>>>>> ARM: use phys_addr_t for DMA zone sizes
>>>>> ARM: highbank: enable DMA zone for LPAE
>>>>> ARM: highbank: select ARCH_HAS_HOLES_MEMORYMODEL
>>>>> ARM: highbank: select required errata work-arounds
>>>>> ARM: highbank: select ARCH_DMA_ADDR_T_64BIT for LPAE
>>>>
>>>> This one seems to have broken the AMBA PL08x DMA driver, and is still
>>>> objected to by Russell, so I'll drop this one for now.
>>>
>>> Exynos does the same selection, but I guess it is not multi-platform
>>> though and doesn't select ARM_AMBA.
>>>
>>>>> ARM: highbank: fix debug uart virtual address for LPAE
>>>>
>>>> The rest look OK and I can pull them if the rest are OK without the
>>>> objectionable one. Let me know if that's OK, or you prefer to wait for
>>>> resolution.
>>>
>>> Yes, I'm fine with dropping this one for now.
>>
>> OK, dropped that one and applied the rest.
>
> OK, with 2 of the 5 patches still having problems/objections, and the
> one causing a new build warning, I've backed out this branch
> from for-next.
Wow, that went well. Sorry about that.
> Could you just respin a branch with the first 3 patches and the fix
> folded in? I know I requested the opposite on IRC, but having a new
> pull request allows me to include your signed tag on the whole bit
> instead of me having to manually massage the branch and merge without a
> signed tag.
Will do. I've got another patch to add and will see if I can get pl081
issue sorted out in the next few days.
Rob
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-08-15 20:51 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-08-14 3:01 [GIT PULL] Highbank fixes for 3.12 Rob Herring
2013-08-14 16:04 ` Kevin Hilman
2013-08-14 18:50 ` Rob Herring
2013-08-14 19:55 ` Kevin Hilman
2013-08-15 15:01 ` Kevin Hilman
2013-08-15 20:51 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).