arm-soc: Xilinx Zynq cleanups for v3.12

arm-soc: Xilinx Zynq cleanups for v3.12

[Michal Simek]

Hi Arnd and Olof,

please pull these cleanup patches to your tree.

Thanks,
Michal

The following changes since commit 3b2f64d00c46e1e4e9bd0bb9bb12619adac27a4b:

  Linux 3.11-rc2 (2013-07-21 12:05:29 -0700)

are available in the git repository at:

  git://git.xilinx.com/linux-xlnx.git tags/zynq-cleanup-for-3.12

for you to fetch changes up to 060968ff9fa1a56b22cc2454906a233d302b1bd2:

  arm: zynq: hotplug: Remove unreachable code (2013-08-13 16:09:12 +0200)

----------------------------------------------------------------
arm: Xilinx Zynq cleanup patches for v3.12

This branch contains these fixes:
- SLCR cleanup
- 2 minor zynq pll fixes
- Hotplug cleanup

----------------------------------------------------------------
Soren Brinkmann (6):
      arm: zynq: slcr: Remove redundant header #includes
      arm: zynq: slcr: Clean up #defines
      arm: zynq: slcr: Use read-modify-write for register writes
      clk/zynq/pll: Fix documentation for PLL register function
      clk/zynq/pll: Use #defines for fbdiv min/max values
      arm: zynq: hotplug: Remove unreachable code

 arch/arm/mach-zynq/hotplug.c | 55 +++++--------------------------------------------------
 arch/arm/mach-zynq/slcr.c    | 45 +++++++++++++++++----------------------------
 drivers/clk/zynq/pll.c       | 18 +++++++++++++-----
 3 files changed, 35 insertions(+), 83 deletions(-)


-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130813/d7e6b013/attachment.sig>

arm-soc: Xilinx Zynq cleanups for v3.12

[Kevin Hilman]

+ Mike Turquette

Michal Simek <monstr@monstr.eu> writes:

> Hi Arnd and Olof,

I'm helping out with arm-soc maintenance now too and I'm on the
arm at kernel.org alias, thanks for Cc'ing it.

> please pull these cleanup patches to your tree.
>
> Thanks,
> Michal
>
> The following changes since commit 3b2f64d00c46e1e4e9bd0bb9bb12619adac27a4b:
>
>   Linux 3.11-rc2 (2013-07-21 12:05:29 -0700)
>
> are available in the git repository at:
>
>   git://git.xilinx.com/linux-xlnx.git tags/zynq-cleanup-for-3.12
>
> for you to fetch changes up to 060968ff9fa1a56b22cc2454906a233d302b1bd2:
>
>   arm: zynq: hotplug: Remove unreachable code (2013-08-13 16:09:12 +0200)
>
> ----------------------------------------------------------------
> arm: Xilinx Zynq cleanup patches for v3.12
>
> This branch contains these fixes:
> - SLCR cleanup
> - 2 minor zynq pll fixes
> - Hotplug cleanup
>
> ----------------------------------------------------------------
> Soren Brinkmann (6):
>       arm: zynq: slcr: Remove redundant header #includes
>       arm: zynq: slcr: Clean up #defines
>       arm: zynq: slcr: Use read-modify-write for register writes
>       clk/zynq/pll: Fix documentation for PLL register function
>       clk/zynq/pll: Use #defines for fbdiv min/max values

These drivers/clk changes should go through the clock maintainer Mike
Turquette.  Could you split them out into a separate pull request?

Alternatively, if Mike is confident there won't be any conflicts with
his tree, I'll happily merge them through arm-soc with his ack.

Otherwise, the rest of the stuff looks OK for v3.12 cleanups and I can
apply it when the path of the clock changes is cleared up.

Thanks,

Kevin

>       arm: zynq: hotplug: Remove unreachable code
>
>  arch/arm/mach-zynq/hotplug.c | 55 +++++--------------------------------------------------
>  arch/arm/mach-zynq/slcr.c    | 45 +++++++++++++++++----------------------------
>  drivers/clk/zynq/pll.c       | 18 +++++++++++++-----
>  3 files changed, 35 insertions(+), 83 deletions(-)

arm-soc: Xilinx Zynq cleanups for v3.12

[Mike Turquette]

Quoting Kevin Hilman (2013-08-13 16:27:10)
> + Mike Turquette
> 
> Michal Simek <monstr@monstr.eu> writes:
> 
> > Hi Arnd and Olof,
> 
> I'm helping out with arm-soc maintenance now too and I'm on the
> arm at kernel.org alias, thanks for Cc'ing it.
> 
> > please pull these cleanup patches to your tree.
> >
> > Thanks,
> > Michal
> >
> > The following changes since commit 3b2f64d00c46e1e4e9bd0bb9bb12619adac27a4b:
> >
> >   Linux 3.11-rc2 (2013-07-21 12:05:29 -0700)
> >
> > are available in the git repository at:
> >
> >   git://git.xilinx.com/linux-xlnx.git tags/zynq-cleanup-for-3.12
> >
> > for you to fetch changes up to 060968ff9fa1a56b22cc2454906a233d302b1bd2:
> >
> >   arm: zynq: hotplug: Remove unreachable code (2013-08-13 16:09:12 +0200)
> >
> > ----------------------------------------------------------------
> > arm: Xilinx Zynq cleanup patches for v3.12
> >
> > This branch contains these fixes:
> > - SLCR cleanup
> > - 2 minor zynq pll fixes
> > - Hotplug cleanup
> >
> > ----------------------------------------------------------------
> > Soren Brinkmann (6):
> >       arm: zynq: slcr: Remove redundant header #includes
> >       arm: zynq: slcr: Clean up #defines
> >       arm: zynq: slcr: Use read-modify-write for register writes
> >       clk/zynq/pll: Fix documentation for PLL register function
> >       clk/zynq/pll: Use #defines for fbdiv min/max values
> 
> These drivers/clk changes should go through the clock maintainer Mike
> Turquette.  Could you split them out into a separate pull request?
> 
> Alternatively, if Mike is confident there won't be any conflicts with
> his tree, I'll happily merge them through arm-soc with his ack.

This is my bad. I updated the clk-fixes branch this morning and then got
distracted and never sent the request to Linus.

Wait for it ... done.

Ok so the two clk patches will hopefully be pulled for -rc6.

Regards,
Mike

> 
> Otherwise, the rest of the stuff looks OK for v3.12 cleanups and I can
> apply it when the path of the clock changes is cleared up.
> 
> Thanks,
> 
> Kevin
> 
> >       arm: zynq: hotplug: Remove unreachable code
> >
> >  arch/arm/mach-zynq/hotplug.c | 55 +++++--------------------------------------------------
> >  arch/arm/mach-zynq/slcr.c    | 45 +++++++++++++++++----------------------------
> >  drivers/clk/zynq/pll.c       | 18 +++++++++++++-----
> >  3 files changed, 35 insertions(+), 83 deletions(-)

arm-soc: Xilinx Zynq cleanups for v3.12

[Michal Simek]

On 08/14/2013 07:01 AM, Mike Turquette wrote:
> Quoting Kevin Hilman (2013-08-13 16:27:10)
>> + Mike Turquette
>>
>> Michal Simek <monstr@monstr.eu> writes:
>>
>>> Hi Arnd and Olof,
>>
>> I'm helping out with arm-soc maintenance now too and I'm on the
>> arm at kernel.org alias, thanks for Cc'ing it.
>>
>>> please pull these cleanup patches to your tree.
>>>
>>> Thanks,
>>> Michal
>>>
>>> The following changes since commit 3b2f64d00c46e1e4e9bd0bb9bb12619adac27a4b:
>>>
>>>   Linux 3.11-rc2 (2013-07-21 12:05:29 -0700)
>>>
>>> are available in the git repository at:
>>>
>>>   git://git.xilinx.com/linux-xlnx.git tags/zynq-cleanup-for-3.12
>>>
>>> for you to fetch changes up to 060968ff9fa1a56b22cc2454906a233d302b1bd2:
>>>
>>>   arm: zynq: hotplug: Remove unreachable code (2013-08-13 16:09:12 +0200)
>>>
>>> ----------------------------------------------------------------
>>> arm: Xilinx Zynq cleanup patches for v3.12
>>>
>>> This branch contains these fixes:
>>> - SLCR cleanup
>>> - 2 minor zynq pll fixes
>>> - Hotplug cleanup
>>>
>>> ----------------------------------------------------------------
>>> Soren Brinkmann (6):
>>>       arm: zynq: slcr: Remove redundant header #includes
>>>       arm: zynq: slcr: Clean up #defines
>>>       arm: zynq: slcr: Use read-modify-write for register writes
>>>       clk/zynq/pll: Fix documentation for PLL register function
>>>       clk/zynq/pll: Use #defines for fbdiv min/max values
>>
>> These drivers/clk changes should go through the clock maintainer Mike
>> Turquette.  Could you split them out into a separate pull request?
>>
>> Alternatively, if Mike is confident there won't be any conflicts with
>> his tree, I'll happily merge them through arm-soc with his ack.
> 
> This is my bad. I updated the clk-fixes branch this morning and then got
> distracted and never sent the request to Linus.
> 
> Wait for it ... done.
> 
> Ok so the two clk patches will hopefully be pulled for -rc6.

These two clk patches in this pull request are different than that 2 patches
which should go to this kernel version and which you correctly added
to pull request to Linus.

Mike: Are you ok to add these 2 patches to mainline via arm-soc tree?
Both changes are cosmetic. If not, I will separate this pull request.

Thanks,
Michal


-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130814/19bdf2af/attachment-0001.sig>

arm-soc: Xilinx Zynq cleanups for v3.12

[Mike Turquette]

Quoting Michal Simek (2013-08-13 22:43:11)
> On 08/14/2013 07:01 AM, Mike Turquette wrote:
> > Quoting Kevin Hilman (2013-08-13 16:27:10)
> >> + Mike Turquette
> >>
> >> Michal Simek <monstr@monstr.eu> writes:
> >>
> >>> Hi Arnd and Olof,
> >>
> >> I'm helping out with arm-soc maintenance now too and I'm on the
> >> arm at kernel.org alias, thanks for Cc'ing it.
> >>
> >>> please pull these cleanup patches to your tree.
> >>>
> >>> Thanks,
> >>> Michal
> >>>
> >>> The following changes since commit 3b2f64d00c46e1e4e9bd0bb9bb12619adac27a4b:
> >>>
> >>>   Linux 3.11-rc2 (2013-07-21 12:05:29 -0700)
> >>>
> >>> are available in the git repository at:
> >>>
> >>>   git://git.xilinx.com/linux-xlnx.git tags/zynq-cleanup-for-3.12
> >>>
> >>> for you to fetch changes up to 060968ff9fa1a56b22cc2454906a233d302b1bd2:
> >>>
> >>>   arm: zynq: hotplug: Remove unreachable code (2013-08-13 16:09:12 +0200)
> >>>
> >>> ----------------------------------------------------------------
> >>> arm: Xilinx Zynq cleanup patches for v3.12
> >>>
> >>> This branch contains these fixes:
> >>> - SLCR cleanup
> >>> - 2 minor zynq pll fixes
> >>> - Hotplug cleanup
> >>>
> >>> ----------------------------------------------------------------
> >>> Soren Brinkmann (6):
> >>>       arm: zynq: slcr: Remove redundant header #includes
> >>>       arm: zynq: slcr: Clean up #defines
> >>>       arm: zynq: slcr: Use read-modify-write for register writes
> >>>       clk/zynq/pll: Fix documentation for PLL register function
> >>>       clk/zynq/pll: Use #defines for fbdiv min/max values
> >>
> >> These drivers/clk changes should go through the clock maintainer Mike
> >> Turquette.  Could you split them out into a separate pull request?
> >>
> >> Alternatively, if Mike is confident there won't be any conflicts with
> >> his tree, I'll happily merge them through arm-soc with his ack.
> > 
> > This is my bad. I updated the clk-fixes branch this morning and then got
> > distracted and never sent the request to Linus.
> > 
> > Wait for it ... done.
> > 
> > Ok so the two clk patches will hopefully be pulled for -rc6.
> 
> These two clk patches in this pull request are different than that 2 patches
> which should go to this kernel version and which you correctly added
> to pull request to Linus.
> 
> Mike: Are you ok to add these 2 patches to mainline via arm-soc tree?
> Both changes are cosmetic. If not, I will separate this pull request.

Oops. Well it's good to get the fixes merged anyways. I'm still taking
patches towards 3.12 so it would be better for me to take them in. Can
you rebase them on top of clk-next and send me a pull request?

Regards,
Mike

> 
> Thanks,
> Michal
> 
> 
> -- 
> Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
> w: www.monstr.eu p: +42-0-721842854
> Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
> Maintainer of Linux kernel - Xilinx Zynq ARM architecture
> Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform

arm-soc: Xilinx Zynq cleanups for v3.12

[Kevin Hilman]

Mike Turquette <mturquette@linaro.org> writes:

> Quoting Michal Simek (2013-08-13 22:43:11)
>> On 08/14/2013 07:01 AM, Mike Turquette wrote:
>> > Quoting Kevin Hilman (2013-08-13 16:27:10)
>> >> + Mike Turquette
>> >>
>> >> Michal Simek <monstr@monstr.eu> writes:
>> >>
>> >>> Hi Arnd and Olof,
>> >>
>> >> I'm helping out with arm-soc maintenance now too and I'm on the
>> >> arm at kernel.org alias, thanks for Cc'ing it.
>> >>
>> >>> please pull these cleanup patches to your tree.
>> >>>
>> >>> Thanks,
>> >>> Michal
>> >>>
>> >>> The following changes since commit 3b2f64d00c46e1e4e9bd0bb9bb12619adac27a4b:
>> >>>
>> >>>   Linux 3.11-rc2 (2013-07-21 12:05:29 -0700)
>> >>>
>> >>> are available in the git repository at:
>> >>>
>> >>>   git://git.xilinx.com/linux-xlnx.git tags/zynq-cleanup-for-3.12
>> >>>
>> >>> for you to fetch changes up to 060968ff9fa1a56b22cc2454906a233d302b1bd2:
>> >>>
>> >>>   arm: zynq: hotplug: Remove unreachable code (2013-08-13 16:09:12 +0200)
>> >>>
>> >>> ----------------------------------------------------------------
>> >>> arm: Xilinx Zynq cleanup patches for v3.12
>> >>>
>> >>> This branch contains these fixes:
>> >>> - SLCR cleanup
>> >>> - 2 minor zynq pll fixes
>> >>> - Hotplug cleanup
>> >>>
>> >>> ----------------------------------------------------------------
>> >>> Soren Brinkmann (6):
>> >>>       arm: zynq: slcr: Remove redundant header #includes
>> >>>       arm: zynq: slcr: Clean up #defines
>> >>>       arm: zynq: slcr: Use read-modify-write for register writes
>> >>>       clk/zynq/pll: Fix documentation for PLL register function
>> >>>       clk/zynq/pll: Use #defines for fbdiv min/max values
>> >>
>> >> These drivers/clk changes should go through the clock maintainer Mike
>> >> Turquette.  Could you split them out into a separate pull request?
>> >>
>> >> Alternatively, if Mike is confident there won't be any conflicts with
>> >> his tree, I'll happily merge them through arm-soc with his ack.
>> > 
>> > This is my bad. I updated the clk-fixes branch this morning and then got
>> > distracted and never sent the request to Linus.
>> > 
>> > Wait for it ... done.
>> > 
>> > Ok so the two clk patches will hopefully be pulled for -rc6.
>> 
>> These two clk patches in this pull request are different than that 2 patches
>> which should go to this kernel version and which you correctly added
>> to pull request to Linus.
>> 
>> Mike: Are you ok to add these 2 patches to mainline via arm-soc tree?
>> Both changes are cosmetic. If not, I will separate this pull request.
>
> Oops. Well it's good to get the fixes merged anyways. I'm still taking
> patches towards 3.12 so it would be better for me to take them in. Can
> you rebase them on top of clk-next and send me a pull request?

... and then resend $SUBJECT pull request to arm at kernel.org without the
drivers/clk changes.  Thanks.

Kevin