From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] clockevents: Prefer clockevents that don't suffer from FEAT_C3_STOP
Date: Thu, 22 Aug 2013 10:40:05 -0700 [thread overview]
Message-ID: <52164CF5.20705@codeaurora.org> (raw)
In-Reply-To: <52164B5B.5010902@ti.com>
On 08/22/13 10:33, Santosh Shilimkar wrote:
> On Thursday 22 August 2013 01:06 PM, Stephen Boyd wrote:
>> On some ARM systems there are two sets of per-cpu timers: the TWD
>> timers and the global timers. The TWD timers are rated at 350 and
>> the global timers are rated at 300 but the TWD timers suffer from
>> FEAT_C3_STOP while the arm global timers don't. The tick device
>> selection logic doesn't consider the FEAT_C3_STOP flag so we'll
>> always end up with the TWD as the tick device although we don't
>> want that.
>>
>> Extend the preference logic to take the FEAT_C3_STOP flag into
>> account and always prefer tick devices that don't suffer from
>> FEAT_C3_STOP even if their rating is lower than tick devices that
>> do suffer from FEAT_C3_STOP. This will remove the need to do any
>> broadcasting on such ARM systems.
>>
>> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
>> ---
>> kernel/time/tick-common.c | 14 ++++++++++++--
>> 1 file changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
>> index 64522ec..3ae437d 100644
>> --- a/kernel/time/tick-common.c
>> +++ b/kernel/time/tick-common.c
>> @@ -244,12 +244,22 @@ static bool tick_check_preferred(struct clock_event_device *curdev,
>> return false;
>> }
>>
>> + if (!curdev)
>> + return true;
>> +
>> + /* Always prefer a tick device that doesn't suffer from FEAT_C3STOP */
>> + if (!(newdev->features & CLOCK_EVT_FEAT_C3STOP) &&
>> + (curdev->features & CLOCK_EVT_FEAT_C3STOP))
>> + return true;
>> + if ((newdev->features & CLOCK_EVT_FEAT_C3STOP) &&
>> + !(curdev->features & CLOCK_EVT_FEAT_C3STOP))
>> + return false;
>> +
> I don't think preferring the clock-event which doesn't suffer
> from FEAT_C3STOP is a good idea if the quality of the time source
> is not same. Generally the global timers are slow and far away from
> CPU(cycle cost). So as long as we don't get impacted because of low power
> states, the tick should run out of local timers which are faster access
> as well as high resolution.
>
Fair enough. I have no data either way to convince anyone that this is a
good or bad idea so this patch should have probably been an RFC. Are you
hinting at something like switching to a per-cpu timer that doesn't
suffer from FEAT_C3_STOP when a CPU goes into a deep idle state?
Interesting idea but I think I'll leave that to someone else if they
really care to do that.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2013-08-22 17:40 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20130717210417.GP13667@xsjandreislx>
[not found] ` <51E72DCA.9070500@codeaurora.org>
[not found] ` <f5b76049-7e5b-4dd0-9863-19cfd1d599b9@TX2EHSMHS006.ehs.local>
[not found] ` <51E7435B.3060605@codeaurora.org>
[not found] ` <ff4d40be-7177-4a55-ab2f-dff11fa18642@DB9EHSMHS009.ehs.local>
[not found] ` <51ED8DF2.60600@codeaurora.org>
[not found] ` <20130722201348.GI453@xsjandreislx>
2013-07-22 22:41 ` Enable arm_global_timer for Zynq brakes boot Sören Brinkmann
2013-07-29 12:51 ` Daniel Lezcano
2013-07-29 15:58 ` Sören Brinkmann
2013-07-30 0:03 ` Sören Brinkmann
2013-07-30 8:47 ` Daniel Lezcano
2013-07-30 22:14 ` Sören Brinkmann
2013-07-30 22:23 ` Sören Brinkmann
2013-07-30 22:34 ` Sören Brinkmann
2013-07-31 7:27 ` Daniel Lezcano
2013-07-31 16:26 ` Sören Brinkmann
2013-07-31 9:34 ` Daniel Lezcano
2013-07-31 16:43 ` Sören Brinkmann
2013-07-31 20:49 ` Daniel Lezcano
2013-07-31 20:58 ` Sören Brinkmann
2013-07-31 21:08 ` Daniel Lezcano
2013-07-31 22:18 ` Sören Brinkmann
2013-07-31 23:01 ` Daniel Lezcano
2013-07-31 23:38 ` Sören Brinkmann
2013-08-01 17:29 ` Daniel Lezcano
2013-08-01 17:43 ` Sören Brinkmann
2013-08-01 17:48 ` Daniel Lezcano
2013-08-06 1:28 ` Sören Brinkmann
2013-08-06 8:46 ` Daniel Lezcano
2013-08-06 9:18 ` Michal Simek
2013-08-06 12:30 ` Daniel Lezcano
2013-08-06 12:41 ` Michal Simek
2013-08-06 13:08 ` Daniel Lezcano
2013-08-06 13:18 ` Michal Simek
2013-08-06 16:09 ` Daniel Lezcano
2013-08-06 16:13 ` Sören Brinkmann
2013-08-06 16:25 ` Sören Brinkmann
2013-08-06 16:18 ` Sören Brinkmann
2013-08-08 17:11 ` Sören Brinkmann
2013-08-08 17:16 ` Mark Rutland
2013-08-08 17:22 ` Stephen Boyd
2013-08-09 10:58 ` Mark Rutland
2013-08-08 17:22 ` Sören Brinkmann
2013-08-09 10:32 ` Srinivas KANDAGATLA
2013-08-09 14:19 ` Daniel Lezcano
2013-08-09 17:27 ` Stephen Boyd
2013-08-09 17:48 ` Sören Brinkmann
2013-08-09 18:45 ` Stephen Boyd
2013-08-12 10:53 ` Daniel Lezcano
2013-08-12 16:23 ` Stephen Boyd
2013-08-12 16:53 ` Daniel Lezcano
2013-08-12 16:03 ` Sören Brinkmann
2013-08-12 16:08 ` Daniel Lezcano
2013-08-12 16:17 ` Sören Brinkmann
2013-08-12 16:20 ` Stephen Boyd
2013-08-12 16:24 ` Sören Brinkmann
2013-08-12 16:40 ` Stephen Boyd
2013-08-12 16:43 ` Sören Brinkmann
2013-08-12 16:32 ` Sören Brinkmann
2013-08-12 16:49 ` Daniel Lezcano
2013-08-12 16:53 ` Sören Brinkmann
2013-08-12 17:02 ` Daniel Lezcano
2013-08-16 17:28 ` Sören Brinkmann
2013-08-19 23:00 ` Stephen Boyd
2013-08-19 23:30 ` Sören Brinkmann
2013-08-20 0:57 ` Stephen Boyd
2013-08-20 15:13 ` Daniel Lezcano
2013-08-22 17:06 ` [PATCH 1/2] tick: broadcast: Deny per-cpu clockevents from being broadcast sources Stephen Boyd
2013-08-22 17:06 ` [PATCH 2/2] clockevents: Prefer clockevents that don't suffer from FEAT_C3_STOP Stephen Boyd
2013-08-22 17:33 ` Santosh Shilimkar
2013-08-22 17:40 ` Stephen Boyd [this message]
2013-08-22 17:48 ` Santosh Shilimkar
2013-08-22 18:31 ` Stephen Boyd
2013-08-22 21:06 ` Santosh Shilimkar
2013-08-22 23:38 ` [PATCH 1/2] tick: broadcast: Deny per-cpu clockevents from being broadcast sources Sören Brinkmann
2013-09-05 16:53 ` Sören Brinkmann
2013-08-09 16:03 ` Enable arm_global_timer for Zynq brakes boot Sören Brinkmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52164CF5.20705@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).