[PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices

[nsekhar@ti.com (Sekhar Nori)]

On 8/23/2013 10:47 PM, Santosh Shilimkar wrote:
> On Friday 23 August 2013 01:08 PM, Sekhar Nori wrote:
>> On 8/13/2013 7:01 PM, Santosh Shilimkar wrote:
>>> On Tuesday 13 August 2013 07:19 AM, Will Deacon wrote:
>>>> On Mon, Aug 12, 2013 at 07:34:13PM +0100, Santosh Shilimkar wrote:
>>>>> On Friday 02 August 2013 11:48 AM, Will Deacon wrote:
>>>>>> I think this an A9-specific register, which reads as 0 on UP A9 and reads as
>>>>>> some form of PERIPH_BASE for SMP parts. The issue I have is when PERIPH_BASE
>>>>>> is zero.
>>>>>>
>>>>> What do we do here ? Should we document this in the code and proceed ?
>>>>> Mostly there is no platform with PERIPH_BASE = 0, so its should be fine but
>>>>> I am open for any other alternative.
>>>>
>>>> The only other alternative I can think of is forcing people to have
>>>> CONFIG_SMP=n, but that blows away single zImage for your platform.
>>>>
>>> Yep which surely we don't want considering after so much effort we
>>> have it working first place. How about going ahead with assumption
>>> that PERIPH_BASE = 0 case doesn't work.
>>
>> I must be missing something but why cannot we use the SCU configuration
>> register "CPU number" field to determine that its a UP? I do not have an
>> OMAP4 board, but on AM437x, it certainly indicates only CPU0 present.
>>
> Thats what patch does. Yes, you are missing the point of dicussion. 

Right, I see that now after actually reading the complete patch :)

> On real UP Cortex-A9, the base address read will return '0' which is
> treated as invalid address in the patch. Will D pointed out that one

Is this something defined by spec for all UP Cortex-A9 or just an
observation on AM437x implementation? It sounds like the later?

Thanks,
Sekhar