[PATCH] pwm: pxa: add device tree support to pwm driver

[mikedunn@newsguy.com (Mike Dunn)]

On 09/04/2013 07:38 AM, Sergei Shtylyov wrote:
> Hello.
> 
> On 04-09-2013 18:23, Mike Dunn wrote:
> 
>>>> +#ifdef CONFIG_OF
>>>> +/* use the platform_device id table for OF match table data */
>>>> +static struct of_device_id pwm_of_match[] = {
>>>> +    { .compatible = "marvell,pxa25x-pwm", .data = &pwm_id_table[0] },
>>>> +    { .compatible = "marvell,pxa27x-pwm", .data = &pwm_id_table[1] },
>>>> +    { .compatible = "marvell,pxa168-pwm", .data = &pwm_id_table[2] },
>>>> +    { .compatible = "marvell,pxa910-pwm", .data = &pwm_id_table[3] },
>>>> +    { }
>>>> +};
>>>> +MODULE_DEVICE_TABLE(of, pwm_of_match);
> 
>>> Are PXA2xx and PXA3xx PWM impleemntations not all the same ? If so, why not just
>>> stick with pxa25x-pwm only for all of the CPUs (aka. the lowest CPU model). Then
>>> the table would have but a single entry.
> 
>> I'm just echoing the existing platform_device_id table...
> 
>> static const struct platform_device_id pwm_id_table[] = {
>>     /*   PWM    has_secondary_pwm? */
>>     { "pxa25x-pwm", 0 },
>>     { "pxa27x-pwm", HAS_SECONDARY_PWM },
>>     { "pxa168-pwm", 0 },
>>     { "pxa910-pwm", 0 },
>>     { },
>> };
>> MODULE_DEVICE_TABLE(platform, pwm_id_table);
> 
>    Unlike 'struct platform_device_id', the "compatible" property can't have
> wildcards such as "pxa25x-pwm". You should choose one model (which e.g. was
> produced first in the PXA25x series) and use that.


Thanks Sergei, I forgot about that.  I also forgot to add a file to
Documentation/devicetree/bindings/pwm/  Looks like I have more work.

Mike