From mboxrd@z Thu Jan 1 00:00:00 1970 From: jic23@kernel.org (Jonathan Cameron) Date: Sat, 14 Sep 2013 13:14:40 +0100 Subject: [PATCH 14/38] iio: accel: st: Append _accel to accelerator sensor device names In-Reply-To: <1378817379-8238-15-git-send-email-lee.jones@linaro.org> References: <1378817379-8238-1-git-send-email-lee.jones@linaro.org> <1378817379-8238-15-git-send-email-lee.jones@linaro.org> Message-ID: <52345330.4050707@kernel.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 09/10/13 13:49, Lee Jones wrote: > Some of ST's sensors are appended with their sensor type and some > are not. For consistency we're extending the same naming convention > throughout. > > Signed-off-by: Lee Jones Honestly I don't care either way on these, but consistency would definitely be good so applied to the togreg branch of iio.git Thanks, > --- > drivers/iio/accel/st_accel.h | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h > index c387763..d8d22e5 100644 > --- a/drivers/iio/accel/st_accel.h > +++ b/drivers/iio/accel/st_accel.h > @@ -15,11 +15,11 @@ > #include > > #define LSM303DLHC_ACCEL_DEV_NAME "lsm303dlhc_accel" > -#define LIS3DH_ACCEL_DEV_NAME "lis3dh" > +#define LIS3DH_ACCEL_DEV_NAME "lis3dh_accel" > #define LSM330D_ACCEL_DEV_NAME "lsm330d_accel" > #define LSM330DL_ACCEL_DEV_NAME "lsm330dl_accel" > #define LSM330DLC_ACCEL_DEV_NAME "lsm330dlc_accel" > -#define LIS331DLH_ACCEL_DEV_NAME "lis331dlh" > +#define LIS331DLH_ACCEL_DEV_NAME "lis331dlh_accel" > #define LSM303DL_ACCEL_DEV_NAME "lsm303dl_accel" > #define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel" > #define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel" >