From: joelf@ti.com (Joel Fernandes)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources
Date: Tue, 17 Sep 2013 09:29:07 -0500 [thread overview]
Message-ID: <52386733.8010807@ti.com> (raw)
In-Reply-To: <5237F147.1020302@ti.com>
On 09/17/2013 01:05 AM, Sekhar Nori wrote:
[..]
>>> mixed messages. In short, we aim for consistency with situation today,
>>> not tomorrow.
>>
>> What you're asking to do infact breaks consistency with the rest of the code.
>
> Well, ideally we support second CC even with DT to be consistent all
> around. Since that has not happened, I don't want the code to pretend
> that it it supports the second channel controller with DT that too only
> in parts of code.
Ok, I agree that the bindings don't talk about encoding a controller number in
the channel provided from DT so it shouldn't assume that without binding
updates. Following this suggestion, I've update the patch to the below:
---8<---
From: Joel Fernandes <joelf@ti.com>
Subject: [PATCH v6] ARM: EDMA: Fix clearing of unused list for DT DMA resources
HWMOD removal for MMC is breaking edma_start as the events are being manually
triggered due to unused channel list not being clear.
The above issue is fixed by reading the "dmas" property from the DT node if it
exists and clearing the bits in the unused channel list if the dma controller
used by any device is EDMA. For this purpose we use the of_* helpers to parse
the arguments in the dmas phandle list.
Also introduced is a minor clean up of a checkpatch error in old code.
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Reported-by: Balaji T K <balajitk@ti.com>
Cc: Pantel Antoniou <panto@antoniou-consulting.com>
Signed-off-by: Joel Fernandes <joelf@ti.com>
---
Changes since initial version:
- Using of_node_put on dma_spec's node pointer.
- Update changelog with minor cleanup information.
- For DT-case, set controller number as 0.
- Reduced indentation of non-of case by returning from of-case
- Using of_* helpers for parsing
arch/arm/common/edma.c | 38 +++++++++++++++++++++++++++++++-------
1 file changed, 31 insertions(+), 7 deletions(-)
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index 117f955..8e1a024 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -269,6 +269,11 @@ static const struct edmacc_param dummy_paramset = {
.ccnt = 1,
};
+static const struct of_device_id edma_of_ids[] = {
+ { .compatible = "ti,edma3", },
+ {}
+};
+
/*****************************************************************************/
static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
@@ -560,14 +565,38 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id,
static int prepare_unused_channel_list(struct device *dev, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
- int i, ctlr;
+ int i, count, ctlr;
+ struct of_phandle_args dma_spec;
+ if (dev->of_node) {
+ count = of_property_count_strings(dev->of_node, "dma-names");
+ if (count < 0)
+ return 0;
+ for (i = 0; i < count; i++) {
+ if (of_parse_phandle_with_args(dev->of_node, "dmas",
+ "#dma-cells", i,
+ &dma_spec))
+ continue;
+
+ if (!of_match_node(edma_of_ids, dma_spec.np)) {
+ of_node_put(dma_spec.np);
+ continue;
+ }
+
+ clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
+ edma_cc[0]->edma_unused);
+ of_node_put(dma_spec.np);
+ }
+ return 0;
+ }
+
+ /* For non-OF case */
for (i = 0; i < pdev->num_resources; i++) {
if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
(int)pdev->resource[i].start >= 0) {
ctlr = EDMA_CTLR(pdev->resource[i].start);
clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
- edma_cc[ctlr]->edma_unused);
+ edma_cc[ctlr]->edma_unused);
}
}
@@ -1762,11 +1791,6 @@ static int edma_probe(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id edma_of_ids[] = {
- { .compatible = "ti,edma3", },
- {}
-};
-
static struct platform_driver edma_driver = {
.driver = {
.name = "edma",
--
1.8.1.2
next prev parent reply other threads:[~2013-09-17 14:29 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-10 18:52 [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources Joel Fernandes
2013-09-12 9:58 ` Sekhar Nori
2013-09-14 0:57 ` Joel Fernandes
2013-09-16 11:48 ` Sekhar Nori
2013-09-16 16:26 ` Joel Fernandes
2013-09-17 5:08 ` Sekhar Nori
2013-09-17 5:38 ` Joel Fernandes
2013-09-17 6:05 ` Sekhar Nori
2013-09-17 14:29 ` Joel Fernandes [this message]
2013-09-19 9:35 ` Sekhar Nori
-- strict thread matches above, loose matches on Subject: below --
2013-09-26 21:55 Joel Fernandes
2013-09-26 23:13 ` Olof Johansson
2013-09-27 0:28 ` Joel Fernandes
2013-09-27 7:49 ` Sekhar Nori
2013-09-27 15:20 ` Joel Fernandes
2013-09-27 9:04 ` Sekhar Nori
2013-09-27 15:25 ` Joel Fernandes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52386733.8010807@ti.com \
--to=joelf@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).