From mboxrd@z Thu Jan 1 00:00:00 1970 From: jiri.prchal@aksignal.cz (=?UTF-8?B?SmnFmcOtIFByY2hhbA==?=) Date: Thu, 19 Sep 2013 15:24:54 +0200 Subject: [PATCH] at91: mmc: fix missing pinctrl in dt In-Reply-To: <523AFA48.80606@atmel.com> References: <1379411857-18516-1-git-send-email-jiri.prchal@aksignal.cz> <1379411857-18516-2-git-send-email-jiri.prchal@aksignal.cz> <523AFA48.80606@atmel.com> Message-ID: <523AFB26.9030701@aksignal.cz> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org OK. Dne 19.9.2013 15:21, Nicolas Ferre napsal(a): > On 17/09/2013 11:57, Jiri Prchal : >> This patch adds pinctrl to soc dtsi file. >> >> Signed-off-by: Jiri Prchal > > > Jiri, > > I will rework your patch by splitting the two lines. This will allow us to be consistent with other AT91 SoC/boards > Device Tree descriptions. > > + pinctrl-names = "default"; > > This one is going in the SoC file, like you did. > > + pinctrl-0 = <&pinctrl_mmc0_slot0_clk_cmd_dat0>; > > This one is under the responsibility of the board itself. The reason behind this is that the dat0 line can be > multiplexed on another pin. > > So, if you need a particular pinctrl configuration on the board side, please send another patch for this addition. > > Thanks bye, > > >> --- >> arch/arm/boot/dts/at91sam9x5.dtsi | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi >> index cf78ac0..c5d26b0 100644 >> --- a/arch/arm/boot/dts/at91sam9x5.dtsi >> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi >> @@ -556,6 +556,8 @@ >> interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; >> dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; >> dma-names = "rxtx"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_mmc0_slot0_clk_cmd_dat0>; >> #address-cells = <1>; >> #size-cells = <0>; >> status = "disabled"; >> > >