From mboxrd@z Thu Jan 1 00:00:00 1970 From: daniel.lezcano@linaro.org (Daniel Lezcano) Date: Mon, 23 Sep 2013 22:49:35 +0200 Subject: at91sam9263 not booting on 3.12-rc1 Message-ID: <5240A95F.8000604@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi all, I am trying to boot a 3.12-rc1 kernel on a calao USB-sam9263 (used default sam9263 config file) but the board hangs at the message: "Uncompressing Linux... done, booting the kernel." After git bisecting, the commit preventing the board to boot is: -------------------- commit ef1ab239c0c7de29072577bc8a39859074603948 Author: Jean-Christophe PLAGNIOL-VILLARD Date: Fri May 24 06:52:06 2013 +0800 ARM: at91: drop non DT: Calao USB-A96x as now we have full DT support of those board Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre ---------------------- So I enabled the CONFIG_USE_OF, the dtb are correctly generated. I tried to boot again, specifying the dtb address with bootm. tftp 0x20000000 /var/lib/tftpboot/at91/arch/arm/boot/usb_a9263.dtb tftp 0x21000000 /var/lib/tftpboot/at91/arch/arm/boot/uImage bootm 0x21000000 - 0x20000000 but without success. I am wondering what I could be doing wrong ... Any help would be appreciate. -- Daniel ps: u-boot is "U-Boot 2010.09 (Oct 27 2010 - 12:28:54)" -- Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog