From mboxrd@z Thu Jan  1 00:00:00 1970
From: t.stanislaws@samsung.com (Tomasz Stanislawski)
Date: Wed, 25 Sep 2013 18:10:52 +0200
Subject: [PATCH v5 4/4] media: s5p-tv: Fix mixer driver to work with CCF
In-Reply-To: <52403799.7020103@samsung.com>
References: <1379775649-6331-1-git-send-email-m.krawczuk@partner.samsung.com>
 <1379775649-6331-5-git-send-email-m.krawczuk@partner.samsung.com>
 <52403799.7020103@samsung.com>
Message-ID: <52430B0C.9080702@samsung.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 09/23/2013 02:44 PM, Sylwester Nawrocki wrote:
> On 21/09/13 17:00, Mateusz Krawczuk wrote:
>> Replace clk_enable by clock_enable_prepare and clk_disable with clk_disable_unprepare.
>> Clock prepare is required by Clock Common Framework, and old clock driver didn`t support it.
>> Without it Common Clock Framework prints a warning.
> 
> nit: Please wrap this text to not exceed 80 columns.
> 
>> Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
>> ---
>>  drivers/media/platform/s5p-tv/mixer_drv.c | 34 +++++++++++++++++++++++++------
>>  1 file changed, 28 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/media/platform/s5p-tv/mixer_drv.c b/drivers/media/platform/s5p-tv/mixer_drv.c
>> index 8ce7c3e..7eea286 100644
>> --- a/drivers/media/platform/s5p-tv/mixer_drv.c
>> +++ b/drivers/media/platform/s5p-tv/mixer_drv.c
>> @@ -347,19 +347,41 @@ static int mxr_runtime_resume(struct device *dev)
>>  {
>>  	struct mxr_device *mdev = to_mdev(dev);
>>  	struct mxr_resources *res = &mdev->res;
>> +	int ret;
>>  
>>  	dev_dbg(mdev->dev, "resume - start\n");
>>  	mutex_lock(&mdev->mutex);
>>  	/* turn clocks on */
>> -	clk_enable(res->mixer);
>> -	clk_enable(res->vp);
>> -	clk_enable(res->sclk_mixer);
>> +	ret = clk_prepare_enable(res->mixer);
>> +	if (ret < 0) {
>> +		dev_err(mdev->dev, "clk_prepare_enable(mixer) failed\n");
>> +		goto fail;
>> +	}
>> +	ret = clk_prepare_enable(res->vp);
>> +	if (ret < 0) {
>> +		dev_err(mdev->dev, "clk_prepare_enable(vp) failed\n");
>> +		goto fail_mixer;
>> +	}
>> +	ret = clk_prepare_enable(res->sclk_mixer);
>> +	if (ret < 0) {
>> +		dev_err(mdev->dev, "clk_prepare_enable(sclk_mixer) failed\n");
>> +		goto fail_vp;
>> +	}
>>  	/* apply default configuration */
>>  	mxr_reg_reset(mdev);
>>  	dev_dbg(mdev->dev, "resume - finished\n");
>>  
>>  	mutex_unlock(&mdev->mutex);
>>  	return 0;
>> +
>> +fail_vp:
>> +	clk_disable_unprepare(res->vp);
>> +fail_mixer:
>> +	clk_disable_unprepare(res->mixer);
>> +fail:
> 
> How about only one error log here if any of the clk_prepare_enable() calls
> fails ? I'm not sure if we need a separate log for each single clock.
> 

I think it would nice to know which clock caused a failure.

>> +	mutex_unlock(&mdev->mutex);
>> +	dev_err(mdev->dev, "resume failed\n");
>> +	return ret;
>>  }
> 
> Regards,
> Sylwester
>