From mboxrd@z Thu Jan 1 00:00:00 1970 From: mkl@pengutronix.de (Marc Kleine-Budde) Date: Mon, 30 Sep 2013 13:19:00 +0200 Subject: imprecise external abort using the flexcan driver on i.MX6Q In-Reply-To: <21065.23354.418805.871480@ipc1.ka-ro> References: <21060.15934.600859.167074@ipc1.ka-ro> <524455FD.7070808@pengutronix.de> <20130926155422.GQ12758@n2100.arm.linux.org.uk> <21061.21191.197931.54061@ipc1.ka-ro> <5245E2C5.1030705@pengutronix.de> <21065.23354.418805.871480@ipc1.ka-ro> Message-ID: <52495E24.4080703@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 09/30/2013 01:06 PM, Lothar Wa?mann wrote: > Hi, > > Marc Kleine-Budde writes: >> On 09/27/2013 07:24 PM, Matt Sealey wrote: >>> Marc - I don't think FLEXCAN has changed layout at all in these areas. >>> The hardware always worked this way.. >> >> All flexcan cores support the RX FIFO, the mx6 supports an additional >> mode for different acceptance filters. >> >>> The only difference here is that the i.MX53 is doing something weird >>> on the bus. The i.MX6Q is giving the absolutely correct BRESP for the >>> transfer to the peripheral (in effect, a "go away, this is my data" >>> failure, which the CPU turns into an imprecise abort since it no idea >>> which transaction it committed aeons ago caused it). >>> >>> Writes to 0x90 to 0xDF while MCR[FEN] is set *should* cause a data >>> abort.. because it's not even a read-only region, it *should* be >>> totally inaccessible to the CPU. >>> >>> The question I have is, when MCR[FEN] is set on i.MX53, does reading >>> from those reserved registers give anything but 0's or garbage? I'm >>> curious, that's all, it doesn't really matter ;) >> >> The driver only read from message buffer 0, and uses buffer 8 for tx. >> The others are not accessed, unless in that chip start routine. We don't >> need this loop, it comes from the original driver. I think no one has >> ever noticed that bug, because all other CPUs have not complained. >> >> The driver without the loop is working on mx6 and Lothar is testing it >> on mx53. >> > I can confirm, that the driver still works on i.MX53 as before the > patch. > Is someone going to prepare a patch, or should I do it, as I was the > one who first brought up this issue? I have a patch ready, it's basically what I send you. Can I add your Tested-by? Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 259 bytes Desc: OpenPGP digital signature URL: