From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 13/19] clk: at91: add PMC programmable clocks
Date: Tue, 8 Oct 2013 18:06:37 +0200 [thread overview]
Message-ID: <52542D8D.1030006@atmel.com> (raw)
In-Reply-To: <52542CA9.2000105@atmel.com>
On 08/10/2013 18:02, Nicolas Ferre :
> On 08/08/2013 09:12, Boris BREZILLON :
>> This patch adds new at91 programmable clocks implementation using common clk
>> framework.
>> A programmable clock is a clock which can be exported on a given pin to clock
>> external devices.
>> Each programmable clock is given an id (from 0 to 8).
>> The number of available programmable clocks depends on the SoC you're using.
>> Programmable clock driver only implements the clock setting (clock rate and
>> parent setting). It must be chained to a system clock in order to
>> enable/disable the generated clock.
>> The PCKX pins used to output the clock signals must be assigned to the
>> appropriate peripheral (see atmel's datasheets).
>>
>> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
>> ---
>> drivers/clk/at91/Makefile | 2 +
>> drivers/clk/at91/clk-programmable.c | 419 +++++++++++++++++++++++++++++++++++
>> drivers/clk/at91/pmc.c | 15 ++
>> drivers/clk/at91/pmc.h | 9 +
>> 4 files changed, 445 insertions(+)
>> create mode 100644 drivers/clk/at91/clk-programmable.c
>>
>> diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
>> index 04deba3..3873b62 100644
>> --- a/drivers/clk/at91/Makefile
>> +++ b/drivers/clk/at91/Makefile
>> @@ -5,3 +5,5 @@
>> obj-y += pmc.o
>> obj-y += clk-main.o clk-pll.o clk-plldiv.o clk-master.o
>> obj-y += clk-system.o clk-peripheral.o
>> +
>> +obj-$(CONFIG_AT91_PROGRAMMABLE_CLOCKS) += clk-programmable.o
>> diff --git a/drivers/clk/at91/clk-programmable.c b/drivers/clk/at91/clk-programmable.c
>> new file mode 100644
>> index 0000000..f40de6a
>> --- /dev/null
>> +++ b/drivers/clk/at91/clk-programmable.c
>> @@ -0,0 +1,419 @@
>> +/*
>> + * drivers/clk/at91/clk-programmable.c
>> + *
>> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/clk/at91_pmc.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/io.h>
>> +#include <linux/wait.h>
>> +#include <linux/sched.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/irq.h>
>> +
>> +#include "pmc.h"
>> +
>> +#define PROG_SOURCE_MAX 5
>> +#define PROG_MAX 8
>> +
>> +struct clk_programmable_layout {
>> + u8 pres_shift;
>> + u8 css_mask;
>> + u8 have_slck_mck;
>> +};
>> +
>> +#define to_clk_programmable(hw) container_of(hw, struct clk_programmable, hw)
>> +struct clk_programmable {
>> + struct clk_hw hw;
>> + struct at91_pmc *pmc;
>> + unsigned int irq;
>> + wait_queue_head_t wait;
>> + u8 id;
>> + u8 css;
>> + u8 pres;
>> + u8 slckmck;
>> + const struct clk_programmable_layout *layout;
>> +};
>> +
>> +static irqreturn_t clk_programmable_irq_handler(int irq, void *dev_id)
>> +{
>> + struct clk_programmable *prog = (struct clk_programmable *)dev_id;
>> +
>> + wake_up(&prog->wait);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int clk_programmable_prepare(struct clk_hw *hw)
>> +{
>> + u32 tmp;
>> + struct clk_programmable *prog = to_clk_programmable(hw);
>> + struct at91_pmc *pmc = prog->pmc;
>> + const struct clk_programmable_layout *layout = prog->layout;
>> +
>> + tmp = prog->css | (prog->pres << layout->pres_shift);
>> + if (layout->have_slck_mck && prog->slckmck)
>> + tmp |= 1 << 8;
>
> ;-) => define constants
>
>> +
>> + pmc_write(pmc, AT91_PMC_PCKR(prog->id), tmp);
>> +
>> + while (!(pmc_read(pmc, AT91_PMC_SR) & (1 << (prog->id + 8))))
>
> - create a macro
> - is creating an event for each iteration of the while loop a good idea?
Oops, it is not "creating" it is "waiting" which is pretty different ;-)
So, do not consider this remark.
> - for the while() loop, I would like a timeout and a a non-active wait
> function...
Okay, this is also false: sorry for the noise.
>
>> + wait_event(prog->wait,
>> + pmc_read(pmc, AT91_PMC_SR) & (1 << (prog->id + 8)));
>> +
>> + return 0;
>> +}
>> +
>> +static int clk_programmable_is_ready(struct clk_hw *hw)
>> +{
>> + struct clk_programmable *prog = to_clk_programmable(hw);
>> + struct at91_pmc *pmc = prog->pmc;
>> +
>> + return !!(pmc_read(pmc, AT91_PMC_SR) & (1 << (prog->id + 8)));
>
> Ditto
>
>> +}
>> +
>> +static unsigned long clk_programmable_recalc_rate(struct clk_hw *hw,
>> + unsigned long parent_rate)
>> +{
>> + u32 tmp;
>> + struct clk_programmable *prog = to_clk_programmable(hw);
>> + struct at91_pmc *pmc = prog->pmc;
>> + const struct clk_programmable_layout *layout = prog->layout;
>> +
>> + tmp = pmc_read(pmc, AT91_PMC_PCKR(prog->id));
>> + prog->pres = (tmp >> layout->pres_shift) & 0x7;
>
> define constants
>
>> +
>> + return parent_rate >> prog->pres;
>> +}
>> +
>> +static long clk_programmable_round_rate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long *parent_rate)
>> +{
>> + unsigned long best_rate = *parent_rate;
>> + unsigned long best_diff;
>> + unsigned long new_diff;
>> + unsigned long cur_rate;
>> + int shift = shift;
>> +
>> + if (rate > *parent_rate)
>> + return *parent_rate;
>> + else
>> + best_diff = *parent_rate - rate;
>> +
>> + if (!best_diff)
>> + return best_rate;
>> +
>> + for (shift = 1; shift < 7; shift++) {
>
> Ditto
>
>> + cur_rate = *parent_rate >> shift;
>> +
>> + if (cur_rate > rate)
>> + new_diff = cur_rate - rate;
>> + else
>> + new_diff = rate - cur_rate;
>> +
>> + if (!new_diff)
>> + return cur_rate;
>> +
>> + if (new_diff < best_diff) {
>> + best_diff = new_diff;
>> + best_rate = cur_rate;
>> + }
>> +
>> + if (rate > cur_rate)
>> + break;
>> +
>> + }
>> +
>> + return best_rate;
>> +}
>> +
>> +static int clk_programmable_set_parent(struct clk_hw *hw, u8 index)
>> +{
>> + struct clk_programmable *prog = to_clk_programmable(hw);
>> + const struct clk_programmable_layout *layout = prog->layout;
>> + if (index > layout->css_mask) {
>> + if (index == 4 && layout->have_slck_mck) {
>
> define "4"
>
>> + prog->css = 0;
>> + prog->slckmck = 1;
>> + return 0;
>> + } else
>
> Style: add the "{"
>
>> + return -EINVAL;
>
> and "}"
>
>> + }
>> +
>> + prog->css = index;
>> + return 0;
>> +}
>> +
>> +static u8 clk_programmable_get_parent(struct clk_hw *hw)
>> +{
>> + u32 tmp;
>> + u8 ret;
>> + struct clk_programmable *prog = to_clk_programmable(hw);
>> + struct at91_pmc *pmc = prog->pmc;
>> + const struct clk_programmable_layout *layout = prog->layout;
>> +
>> + tmp = pmc_read(pmc, AT91_PMC_PCKR(prog->id));
>> + prog->css = tmp & layout->css_mask;
>> + ret = prog->css;
>> + if (layout->have_slck_mck) {
>> + prog->slckmck = !!(tmp & (1 << 8));
>
> Ditto
>
>> + if (prog->slckmck && !ret)
>> + ret = 4;
>
> Ditto
>
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int clk_programmable_set_rate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long parent_rate)
>> +{
>> + struct clk_programmable *prog = to_clk_programmable(hw);
>> + unsigned long best_rate = parent_rate;
>> + unsigned long best_diff;
>> + unsigned long new_diff;
>> + unsigned long cur_rate;
>> + int shift = 0;
>> +
>> + if (rate > parent_rate)
>> + return parent_rate;
>> + else
>> + best_diff = parent_rate - rate;
>> +
>> + if (!best_diff) {
>> + prog->pres = shift;
>> + return 0;
>> + }
>> +
>> + for (shift = 1; shift < 7; shift++) {
>
> Ditto
>
>> + cur_rate = parent_rate >> shift;
>> +
>> + if (cur_rate > rate)
>> + new_diff = cur_rate - rate;
>> + else
>> + new_diff = rate - cur_rate;
>> +
>> + if (!new_diff)
>> + break;
>> +
>> + if (new_diff < best_diff) {
>> + best_diff = new_diff;
>> + best_rate = cur_rate;
>> + }
>> +
>> + if (rate > cur_rate)
>> + break;
>> +
>> + }
>> +
>> + prog->pres = shift;
>> + return 0;
>> +}
>> +
>> +static const struct clk_ops programmable_ops = {
>> + .prepare = clk_programmable_prepare,
>> + .is_prepared = clk_programmable_is_ready,
>> + .recalc_rate = clk_programmable_recalc_rate,
>> + .round_rate = clk_programmable_round_rate,
>> + .get_parent = clk_programmable_get_parent,
>> + .set_parent = clk_programmable_set_parent,
>> + .set_rate = clk_programmable_set_rate,
>> +};
>> +
>> +static struct clk * __init
>> +at91_clk_register_programmable(struct at91_pmc *pmc, unsigned int irq,
>> + const char *name, const char **parent_names,
>> + u8 num_parents, u8 id,
>> + const struct clk_programmable_layout *layout)
>> +{
>> + int ret;
>> + struct clk_programmable *prog;
>> + struct clk *clk = NULL;
>> + struct clk_init_data init;
>> + char irq_name[11];
>> +
>> + id &= 7;
>
> Ditto
>
>> +
>> + prog = kzalloc(sizeof(*prog), GFP_KERNEL);
>> + if (!prog)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + init.name = name;
>> + init.ops = &programmable_ops;
>> + init.parent_names = parent_names;
>> + init.num_parents = num_parents;
>> + init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
>> +
>> + prog->id = id;
>> + prog->layout = layout;
>> + prog->hw.init = &init;
>> + prog->pmc = pmc;
>> + prog->irq = irq;
>> + init_waitqueue_head(&prog->wait);
>> + irq_set_status_flags(prog->irq, IRQ_NOAUTOEN);
>> + snprintf(irq_name, sizeof(irq_name), "clk-prog%d", id);
>> + ret = request_irq(prog->irq, clk_programmable_irq_handler,
>> + IRQF_TRIGGER_HIGH, irq_name, prog);
>> + if (ret)
>> + return ERR_PTR(ret);
>> +
>> + clk = clk_register(NULL, &prog->hw);
>> +
>
> ^^
>
>> + if (IS_ERR(clk))
>> + kfree(prog);
>> +
>> + return clk;
>> +}
>> +
>> +static const struct clk_programmable_layout at91rm9200_programmable_layout = {
>> + .pres_shift = 2,
>> + .css_mask = 0x3,
>> + .have_slck_mck = 0,
>> +};
>> +
>> +static const struct clk_programmable_layout at91sam9g45_programmable_layout = {
>> + .pres_shift = 2,
>> + .css_mask = 0x3,
>> + .have_slck_mck = 1,
>> +};
>> +
>> +static const struct clk_programmable_layout at91sam9x5_programmable_layout = {
>> + .pres_shift = 4,
>> + .css_mask = 0x7,
>> + .have_slck_mck = 0,
>> +};
>> +
>> +struct clk_prog_data {
>> + struct clk **clks;
>> + u8 *ids;
>> + unsigned int clk_num;
>> +};
>> +
>> +static struct clk * __init
>> +of_clk_src_periph_get(struct of_phandle_args *clkspec, void *data)
>> +{
>> + struct clk_prog_data *clk_data = data;
>> + unsigned int id = clkspec->args[0];
>> + int i;
>> +
>> + if (id >= PROG_MAX)
>> + goto err;
>> +
>> + for (i = 0; i < clk_data->clk_num; i++) {
>> + if (clk_data->ids[i] == id)
>> + return clk_data->clks[i];
>> + }
>> +
>> +err:
>> + pr_err("%s: invalid clock id %d\n", __func__, id);
>> + return ERR_PTR(-EINVAL);
>> +}
>> +
>> +static void __init
>> +of_at91_clk_prog_setup(struct device_node *np, struct at91_pmc *pmc,
>> + const struct clk_programmable_layout *layout)
>> +{
>> + int num;
>> + u32 id;
>> + int i;
>> + unsigned int irq;
>> + struct clk *clk;
>> + int num_parents;
>> + u8 *ids;
>> + struct clk **clks;
>> + struct clk_prog_data *clktab;
>> + const char *parent_names[PROG_SOURCE_MAX];
>> + const char *name;
>> + struct device_node *progclknp;
>> +
>> + num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
>> + if (num_parents <= 0 || num_parents > PROG_SOURCE_MAX)
>> + return;
>> +
>> + for (i = 0; i < num_parents; ++i) {
>> + parent_names[i] = of_clk_get_parent_name(np, i);
>> + if (!parent_names[i])
>> + return;
>> + }
>> +
>> + num = of_get_child_count(np);
>> + if (!num || num > PROG_MAX)
>> + return;
>> +
>> + clktab = kzalloc(sizeof(*clktab), GFP_KERNEL);
>> + if (!clktab)
>> + return;
>> +
>> + ids = kzalloc(num * sizeof(*ids), GFP_KERNEL);
>> + if (!ids)
>> + goto out_free_clktab;
>> +
>> + clks = kzalloc(num * sizeof(*clks), GFP_KERNEL);
>> + if (!clks)
>> + goto out_free_ids;
>> +
>> + i = 0;
>> + for_each_child_of_node(np, progclknp) {
>> + name = progclknp->name;
>> +
>> + if (of_property_read_u32(progclknp, "atmel,clk-id", &id))
>> + goto out_free_clks;
>> + if (id >= PROG_MAX)
>> + goto out_free_clks;
>> +
>> + irq = irq_of_parse_and_map(np, 0);
>> + if (!irq)
>> + goto out_free_clks;
>> +
>> + clk = at91_clk_register_programmable(pmc, irq, name,
>> + parent_names, num_parents,
>> + id, layout);
>> + if (IS_ERR(clk))
>> + goto out_free_clks;
>> +
>> + clks[i] = clk;
>> + ids[i++] = id;
>> + }
>> +
>> + clktab->clk_num = num;
>> + clktab->clks = clks;
>> + clktab->ids = ids;
>> + of_clk_add_provider(np, of_clk_src_periph_get, clktab);
>> + return;
>> +
>> +out_free_clks:
>> + kfree(clks);
>> +out_free_ids:
>> + kfree(ids);
>> +out_free_clktab:
>> + kfree(clktab);
>> +}
>> +
>> +
>> +void __init of_at91rm9200_clk_prog_setup(struct device_node *np,
>> + struct at91_pmc *pmc)
>> +{
>> + of_at91_clk_prog_setup(np, pmc, &at91rm9200_programmable_layout);
>> +}
>> +
>> +void __init of_at91sam9g45_clk_prog_setup(struct device_node *np,
>> + struct at91_pmc *pmc)
>> +{
>> + of_at91_clk_prog_setup(np, pmc, &at91sam9g45_programmable_layout);
>> +}
>> +
>> +void __init of_at91sam9x5_clk_prog_setup(struct device_node *np,
>> + struct at91_pmc *pmc)
>> +{
>> + of_at91_clk_prog_setup(np, pmc, &at91sam9x5_programmable_layout);
>> +}
>> diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
>> index 1a56f1c..66a627d 100644
>> --- a/drivers/clk/at91/pmc.c
>> +++ b/drivers/clk/at91/pmc.c
>> @@ -265,6 +265,21 @@ static const struct of_device_id pmc_clk_ids[] __initdata = {
>> .compatible = "atmel,at91sam9x5-clk-peripheral",
>> .data = of_at91sam9x5_clk_periph_setup,
>> },
>> + /* Programmable clocks */
>> +#if defined(CONFIG_AT91_PROGRAMMABLE_CLOCKS)
>> + {
>> + .compatible = "atmel,at91rm9200-clk-programmable",
>> + .data = of_at91rm9200_clk_prog_setup,
>> + },
>> + {
>> + .compatible = "atmel,at91sam9g45-clk-programmable",
>> + .data = of_at91sam9g45_clk_prog_setup,
>> + },
>> + {
>> + .compatible = "atmel,at91sam9x5-clk-programmable",
>> + .data = of_at91sam9x5_clk_prog_setup,
>> + },
>> +#endif
>> { /*sentinel*/ }
>> };
>>
>> diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
>> index 08c30fb..5f20dc1 100644
>> --- a/drivers/clk/at91/pmc.h
>> +++ b/drivers/clk/at91/pmc.h
>> @@ -82,4 +82,13 @@ extern void __init of_at91rm9200_clk_periph_setup(struct device_node *np,
>> extern void __init of_at91sam9x5_clk_periph_setup(struct device_node *np,
>> struct at91_pmc *pmc);
>>
>> +#if defined(CONFIG_AT91_PROGRAMMABLE_CLOCKS)
>> +extern void __init of_at91rm9200_clk_prog_setup(struct device_node *np,
>> + struct at91_pmc *pmc);
>> +extern void __init of_at91sam9g45_clk_prog_setup(struct device_node *np,
>> + struct at91_pmc *pmc);
>> +extern void __init of_at91sam9x5_clk_prog_setup(struct device_node *np,
>> + struct at91_pmc *pmc);
>> +#endif
>> +
>> #endif /* __PMC_H_ */
>>
>
>
--
Nicolas Ferre
next prev parent reply other threads:[~2013-10-08 16:06 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-08 4:53 [PATCH v3 00/19] ARM: at91: move to common clk framework Boris BREZILLON
2013-08-08 4:59 ` [PATCH v3 01/19] ARM: at91: move at91_pmc.h to include/linux/clk/at91_pmc.h Boris BREZILLON
2013-08-08 5:01 ` [PATCH v3 03/19] clk: at91: add PMC base support Boris BREZILLON
2013-10-07 15:07 ` Nicolas Ferre
2013-10-07 15:57 ` boris brezillon
2013-08-08 5:02 ` [PATCH v3 02/19] ARM: at91: add Kconfig options for common clk support Boris BREZILLON
2013-10-07 15:12 ` Nicolas Ferre
2013-10-07 16:05 ` boris brezillon
2013-10-09 9:56 ` boris brezillon
2013-10-09 10:05 ` Nicolas Ferre
2013-08-08 5:04 ` [PATCH v3 04/19] clk: at91: add PMC macro file for dt definitions Boris BREZILLON
2013-10-07 15:17 ` Nicolas Ferre
2013-10-07 16:06 ` boris brezillon
2013-08-08 5:06 ` [PATCH v3 05/19] clk: at91: add PMC main clock Boris BREZILLON
2013-10-07 16:51 ` Nicolas Ferre
2013-10-07 19:11 ` boris brezillon
2013-10-08 8:24 ` Nicolas Ferre
2013-10-08 9:00 ` boris brezillon
2013-08-08 6:07 ` [PATCH v3 06/19] clk: at91: add PMC pll clocks Boris BREZILLON
2013-10-08 10:28 ` Nicolas Ferre
2013-10-08 11:45 ` boris brezillon
2013-08-08 6:09 ` [PATCH v3 07/19] clk: at91: add pll id macros for pll dt bindings Boris BREZILLON
2013-10-08 10:30 ` Nicolas Ferre
2013-10-08 12:03 ` boris brezillon
2013-08-08 6:10 ` [PATCH v3 08/19] clk: at91: add PMC master clock Boris BREZILLON
2013-08-08 6:12 ` [PATCH v3 09/19] clk: at91: add PMC system clocks Boris BREZILLON
2013-10-08 15:32 ` Nicolas Ferre
2013-08-08 6:15 ` [PATCH v3 10/19] ARM: at91/dt: add system clk id definitions in dt-bindings include dir Boris BREZILLON
2013-10-08 15:36 ` Nicolas Ferre
2013-08-08 6:16 ` [PATCH v3 11/19] clk: at91: add PMC peripheral clocks Boris BREZILLON
2013-10-08 15:43 ` Nicolas Ferre
2013-08-08 7:10 ` [PATCH v3 12/19] clk: at91: add peripheral clk macros for peripheral clk dt bindings Boris BREZILLON
2013-10-08 15:44 ` Nicolas Ferre
2013-10-08 16:01 ` boris brezillon
2013-10-08 16:15 ` Nicolas Ferre
2013-10-08 16:19 ` boris brezillon
2013-08-08 7:12 ` [PATCH v3 13/19] clk: at91: add PMC programmable clocks Boris BREZILLON
2013-10-08 16:02 ` Nicolas Ferre
2013-10-08 16:06 ` Nicolas Ferre [this message]
2013-08-08 7:14 ` [PATCH v3 14/19] clk: at91: add PMC utmi clock Boris BREZILLON
2013-10-08 16:08 ` Nicolas Ferre
2013-08-08 7:15 ` [PATCH v3 15/19] clk: at91: add PMC usb clock Boris BREZILLON
2013-10-08 16:20 ` Nicolas Ferre
2013-08-08 7:17 ` [PATCH v3 16/19] clk: at91: add PMC smd clock Boris BREZILLON
2013-10-08 16:22 ` Nicolas Ferre
2013-08-08 7:19 ` [PATCH v3 17/19] clk: at91: add PMC clk device tree binding doc Boris BREZILLON
2013-10-08 9:44 ` Nicolas Ferre
2013-10-08 12:37 ` boris brezillon
2013-10-08 12:42 ` Nicolas Ferre
2013-08-08 8:17 ` [PATCH v3 18/19] ARM: at91: move pit timer to common clk framework Boris BREZILLON
2013-10-08 16:28 ` Nicolas Ferre
2013-08-08 8:19 ` [PATCH v3 19/19] ARM: at91: add new compatible strings for pmc driver Boris BREZILLON
2013-10-08 16:29 ` Nicolas Ferre
2013-08-20 10:21 ` [PATCH v3 00/19] ARM: at91: move to common clk framework boris brezillon
2013-10-07 20:06 ` Mike Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52542D8D.1030006@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).