From mboxrd@z Thu Jan 1 00:00:00 1970 From: kishon@ti.com (Kishon Vijay Abraham I) Date: Wed, 16 Oct 2013 18:47:08 +0530 Subject: [PATCH v2 2/2] ARM: dts: omap5: Add dr_mode for dwc3 In-Reply-To: <1381816199-7966-1-git-send-email-kishon@ti.com> References: <52580F34.8030809@ti.com> <1381816199-7966-1-git-send-email-kishon@ti.com> Message-ID: <525E91D4.30509@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Benoit, On Tuesday 15 October 2013 11:19 AM, Kishon Vijay Abraham I wrote: > From: George Cherian > > Added dr_mode property in dwc3 and set its default mode to device. > Currently dwc3 driver doesn't have support for OTG mode. So explicitly > setting to peripheral even dwc3 is a OTG controller since OMAP5 has > already got an EHCI host. > > Signed-off-by: George Cherian > Signed-off-by: Kishon Vijay Abraham I Can you take this patch for 3.13? Thanks Kishon > --- > Changes from v1: > Changed the commit log to explain why dr_mode was not set to OTG. > arch/arm/boot/dts/omap5.dtsi | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi > index 6d0a1d5..ef598af 100644 > --- a/arch/arm/boot/dts/omap5.dtsi > +++ b/arch/arm/boot/dts/omap5.dtsi > @@ -652,6 +652,7 @@ > reg = <0x4a030000 0x10000>; > interrupts = ; > usb-phy = <&usb2_phy>, <&usb3_phy>; > + dr_mode = "peripheral"; > tx-fifo-resize; > }; > }; >