From: daniel.lezcano@linaro.org (Daniel Lezcano)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 12/14] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC
Date: Thu, 17 Oct 2013 12:15:49 +0200 [thread overview]
Message-ID: <525FB8D5.1050106@linaro.org> (raw)
In-Reply-To: <1381759106-15004-13-git-send-email-gregory.clement@free-electrons.com>
On 10/14/2013 03:58 PM, Gregory CLEMENT wrote:
> Add the wfi, cpu idle and cpu deep idle power states support for the
> Armada XP SoCs.
>
> All the latencies and the power consumption values used at the
> "armada_370_xp_idle_driver" structure are preliminary and will be
> modified in the future after running some measurements and analysis.
>
> Based on the work of Nadav Haklai.
>
> Signed-off-by: Nadav Haklai <nadavh@marvell.com>
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> ---
> drivers/cpuidle/Kconfig.arm | 5 ++
> drivers/cpuidle/Makefile | 1 +
> drivers/cpuidle/cpuidle-armada-370-xp.c | 117 ++++++++++++++++++++++++++++++++
> 3 files changed, 123 insertions(+)
> create mode 100644 drivers/cpuidle/cpuidle-armada-370-xp.c
>
> diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
> index 8e36603..071d960 100644
> --- a/drivers/cpuidle/Kconfig.arm
> +++ b/drivers/cpuidle/Kconfig.arm
> @@ -1,6 +1,11 @@
> #
> # ARM CPU Idle drivers
> #
> +config ARM_ARMADA_370_XP_CPUIDLE
> + bool "CPU Idle Driver for Armada 370/XP family processors"
> + depends on ARCH_MVEBU
> + help
> + Select this to enable cpuidle on Armada 370/XP processors.
>
> config ARM_HIGHBANK_CPUIDLE
> bool "CPU Idle Driver for Calxeda processors"
> diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
> index cea5ef5..395dab6 100644
> --- a/drivers/cpuidle/Makefile
> +++ b/drivers/cpuidle/Makefile
> @@ -7,6 +7,7 @@ obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
>
> ##################################################################################
> # ARM SoC drivers
> +obj-$(CONFIG_ARM_ARMADA_370_XP_CPUIDLE) += cpuidle-armada-370-xp.o
> obj-$(CONFIG_ARM_HIGHBANK_CPUIDLE) += cpuidle-calxeda.o
> obj-$(CONFIG_ARM_KIRKWOOD_CPUIDLE) += cpuidle-kirkwood.o
> obj-$(CONFIG_ARM_ZYNQ_CPUIDLE) += cpuidle-zynq.o
> diff --git a/drivers/cpuidle/cpuidle-armada-370-xp.c b/drivers/cpuidle/cpuidle-armada-370-xp.c
> new file mode 100644
> index 0000000..3fa005e
> --- /dev/null
> +++ b/drivers/cpuidle/cpuidle-armada-370-xp.c
> @@ -0,0 +1,117 @@
> +/*
> + * Marvell Armada 370 and Armada XP SoC cpuidle driver
> + *
> + * Copyright (C) 2013 Marvell
> + *
> + * Nadav Haklai <nadavh@marvell.com>
> + * Gregory CLEMENT <gregory.clement@free-electrons.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + *
> + * Maintainer: Gregory CLEMENT <gregory.clement@free-electrons.com>
> + */
> +
> +#include <linux/cpuidle.h>
> +#include <linux/module.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/suspend.h>
> +#include <asm/suspend.h>
> +#include <linux/smp.h>
> +#include <asm/cpuidle.h>
> +#include <asm/smp_plat.h>
> +#include <linux/armada-370-xp-pmsu.h>
> +#include <linux/platform_device.h>
> +
> +#define ARMADA_370_XP_MAX_STATES 3
> +#define ARMADA_370_XP_FLAG_DEEP_IDLE 0x10000
> +
> +extern void v7_flush_dcache_all(void);
> +
> +/* Functions defined in suspend-armada-370-xp.S */
> +int armada_370_xp_cpu_resume(unsigned long);
> +int armada_370_xp_cpu_suspend(unsigned long);
> +
> +static int armada_370_xp_enter_idle(struct cpuidle_device *dev,
> + struct cpuidle_driver *drv,
> + int index)
> +{
> + bool deepidle = false;
> + unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
>
> + armada_370_xp_pmsu_set_start_addr(armada_370_xp_cpu_resume, hw_cpu);
What about using cpu_pm_enter() here and move the function above to a
notifier callback for CPU_PM_ENTER inside the marvell pm code ? The code
will be more encapsulated, no ?
> +
> + if (drv->states[index].flags & ARMADA_370_XP_FLAG_DEEP_IDLE)
> + deepidle = true;
> +
> + cpu_suspend(deepidle, armada_370_xp_cpu_suspend);
> +
> + armada_370_xp_pmsu_idle_restore();
Same comment by using cpu_pm_exit.
> +
> + return index;
> +}
> +
> +static struct cpuidle_driver armada_370_xp_idle_driver = {
> + .name = "armada_370_xp_idle",
> + .states[0] = ARM_CPUIDLE_WFI_STATE,
> + .states[1] = {
> + .enter = armada_370_xp_enter_idle,
> + .exit_latency = 10,
> + .power_usage = 50,
> + .target_residency = 100,
> + .flags = CPUIDLE_FLAG_TIME_VALID,
> + .name = "MV CPU IDLE",
> + .desc = "CPU power down",
> + },
> + .states[2] = {
> + .enter = armada_370_xp_enter_idle,
> + .exit_latency = 100,
> + .power_usage = 5,
> + .target_residency = 1000,
> + .flags = CPUIDLE_FLAG_TIME_VALID |
> + ARMADA_370_XP_FLAG_DEEP_IDLE,
> + .name = "MV CPU DEEP IDLE",
> + .desc = "CPU and L2 Fabric power down",
> + },
> + .state_count = ARMADA_370_XP_MAX_STATES,
> +};
> +
> +static int armada_370_xp_cpuidle_probe(struct platform_device *pdev)
> +{
> + if (!of_find_compatible_node(NULL, NULL, "marvell,armada-370-xp-pmsu"))
> + return -ENODEV;
> +
> + if (!of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"))
> + return -ENODEV;
> +
> + pr_info("Initializing Armada-XP CPU power management ");
> +
> + armada_370_xp_pmsu_enable_l2_powerdown_onidle();
Isn't possible to move this function inside pmsu.c ? as well as the
of_find_compatible functions ?
> +
> + return cpuidle_register(&armada_370_xp_idle_driver, NULL);
> +}
> +
> +static int armada_370_xp_cpuidle_remove(struct platform_device *pdev)
> +{
> + cpuidle_unregister(&armada_370_xp_idle_driver);
> + return 0;
> +}
> +
> +
> +static struct platform_driver armada_370_xp_cpuidle_plat_driver = {
> + .driver = {
> + .name = "cpuidle-armada-370-xp",
> + .owner = THIS_MODULE,
> + },
> + .probe = armada_370_xp_cpuidle_probe,
> + .remove = armada_370_xp_cpuidle_remove,
> +};
> +
> +
> +module_platform_driver(armada_370_xp_cpuidle_plat_driver);
> +
> +MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
> +MODULE_DESCRIPTION("Armada 370/XP cpu idle driver");
> +MODULE_LICENSE("GPL");
The driver is statically compiled in the kernel, removal of the driver
is pointless.
Thanks
-- Daniel
--
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
next prev parent reply other threads:[~2013-10-17 10:15 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-14 13:58 [PATCH v3 00/14] CPU idle for Armada XP Gregory CLEMENT
2013-10-14 13:58 ` [PATCH v3 01/14] ARM: PJ4B: Add cpu_suspend/cpu_resume hooks for PJ4B Gregory CLEMENT
2013-10-14 13:58 ` [PATCH v3 02/14] ARM: mvebu: ll_set_cpu_coherent no more uses the coherency address as parameter Gregory CLEMENT
2013-10-14 14:20 ` Thomas Petazzoni
2013-10-14 13:58 ` [PATCH v3 03/14] ARM: mvebu: ll_set_cpu_coherent always uses the current CPU Gregory CLEMENT
2013-10-14 14:22 ` Thomas Petazzoni
2013-10-14 13:58 ` [PATCH v3 04/14] ARM: mvebu: Remove the unused argument of set_cpu_coherent() Gregory CLEMENT
2013-10-14 14:23 ` Thomas Petazzoni
2013-10-14 13:58 ` [PATCH v3 05/14] ARM: mvebu: Make ll_set_cpu_coherent() more configurable Gregory CLEMENT
2013-10-14 14:26 ` Thomas Petazzoni
2013-10-14 13:58 ` [PATCH v3 06/14] ARM: mvebu: Low level functions to disable cache snooping Gregory CLEMENT
2013-10-14 14:32 ` Thomas Petazzoni
2013-10-14 13:58 ` [PATCH v3 07/14] ARM: mvebu: Add a new set of registers for pmsu Gregory CLEMENT
2013-10-14 14:34 ` Thomas Petazzoni
2013-10-14 14:36 ` Jason Cooper
2013-10-14 13:58 ` [PATCH v3 08/14] ARM: mvebu: Allow to power down L2 cache controller in idle mode Gregory CLEMENT
2013-10-14 14:44 ` Thomas Petazzoni
2013-10-14 13:58 ` [PATCH v3 09/14] ARM: mvebu: Add the PMSU related part of the cpu idle functions Gregory CLEMENT
2013-10-14 14:54 ` Thomas Petazzoni
2013-10-14 13:58 ` [PATCH v3 10/14] ARM: mvebu: Set the start address of a CPU in a separate function Gregory CLEMENT
2013-10-14 13:58 ` [PATCH v3 11/14] ARM: mvebu: Add CPU idle low level support for Marvell Armada XP Gregory CLEMENT
2013-10-14 16:28 ` Thomas Petazzoni
2013-10-14 13:58 ` [PATCH v3 12/14] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC Gregory CLEMENT
2013-10-14 16:36 ` Thomas Petazzoni
2013-10-17 10:15 ` Daniel Lezcano [this message]
2013-10-14 13:58 ` [PATCH v3 13/14] ARM: mvebu: register the cpuidle driver for the Armada XP SoCs Gregory CLEMENT
2013-10-14 13:58 ` [PATCH v3 14/14] ARM: dts: mvebu: Add a new set of registers to the PMSU node Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=525FB8D5.1050106@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).