From mboxrd@z Thu Jan  1 00:00:00 1970
From: bcousson@baylibre.com (Benoit Cousson)
Date: Fri, 18 Oct 2013 17:59:56 +0200
Subject: [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY
 framework
In-Reply-To: <526122C4.4090702@ti.com>
References: <1381142810-14541-1-git-send-email-rogerq@ti.com>
 <526122C4.4090702@ti.com>
Message-ID: <52615AFC.5070203@baylibre.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Roger,

On 18/10/2013 14:00, Roger Quadros wrote:
> Hi Benoit,
>
> Could you please include this one for 3.13?
> Without this OTG port will be broken for beagle. Thanks.
>

I've just applied it.

Thanks,
Benoit

> cheers,
> -roger
>
> On 10/07/2013 01:46 PM, Roger Quadros wrote:
>> The generic PHY framewrok expects different properties than the
>> old USB PHY framework. Supply those properties.
>>
>> Fixes USB OTG port on beagle after the Generic PHY framework was
>> merged in greg/usb-next. [1]
>>
>> [1] - https://lkml.org/lkml/2013/9/27/581
>>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>>   arch/arm/boot/dts/omap3-beagle.dts |    2 ++
>>   1 files changed, 2 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
>> index 7669c16..fa532aa 100644
>> --- a/arch/arm/boot/dts/omap3-beagle.dts
>> +++ b/arch/arm/boot/dts/omap3-beagle.dts
>> @@ -173,6 +173,8 @@
>>   &usb_otg_hs {
>>   	interface-type = <0>;
>>   	usb-phy = <&usb2_phy>;
>> +	phys = <&usb2_phy>;
>> +	phy-names = "usb2-phy";
>>   	mode = <3>;
>>   	power = <50>;
>>   };
>>
>


-- 
Beno?t Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com