linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] mvebu: Dove: Instantiate cpufreq driver.
Date: Mon, 21 Oct 2013 11:47:32 +0100	[thread overview]
Message-ID: <52650644.9010208@gmail.com> (raw)
In-Reply-To: <1382186261-14482-3-git-send-email-andrew@lunn.ch>

On 10/19/2013 01:37 PM, Andrew Lunn wrote:
> Add a platform driver definition to instantiate the dove cpufreq
> driver. Also indicate the ARCH has cpufreq support, so allowing the
> cpufreq framework to be enabled.
>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> ---
>   arch/arm/Kconfig                       |  1 +
>   arch/arm/mach-dove/board-dt.c          |  2 ++
>   arch/arm/mach-dove/common.c            | 36 ++++++++++++++++++++++++++++++++++
>   arch/arm/mach-dove/common.h            |  1 +
>   arch/arm/mach-dove/include/mach/dove.h |  1 +
>   5 files changed, 41 insertions(+)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 1ad6fb6..7744415 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -495,6 +495,7 @@ config ARCH_IXP4XX
>
>   config ARCH_DOVE
>   	bool "Marvell Dove"
> +	select ARCH_HAS_CPUFREQ
>   	select ARCH_REQUIRE_GPIOLIB
>   	select CPU_PJ4
>   	select GENERIC_CLOCKEVENTS
> diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c
> index 49f72a8..98202de 100644
> --- a/arch/arm/mach-dove/board-dt.c
> +++ b/arch/arm/mach-dove/board-dt.c
> @@ -70,6 +70,8 @@ static void __init dove_dt_init(void)
>   	/* Setup clocks for legacy devices */
>   	dove_legacy_clk_init();
>
> +	dove_cpufreq_init();
> +

What ever the outcome of "DT: blessing or curse" discussion at ELCE will
be, are there any plans to probe the cpufreq/cpuidle drivers directly
from DT? Someday, we want to get rid of .machine_init.

>   	/* Internal devices not ported to DT yet */
>   	dove_pcie_init(1, 1);
>
> diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
> index c122bcf..9e648a8 100644
> --- a/arch/arm/mach-dove/common.c
> +++ b/arch/arm/mach-dove/common.c
> @@ -344,6 +344,42 @@ void __init dove_sdio1_init(void)
>   	platform_device_register(&dove_sdio1);
>   }
>
> +/*****************************************************************************
> + * CPU Frequency
> + ****************************************************************************/
> +static struct resource dove_cpufreq_resources[] = {
> +	[0] = {
> +		.start  = DOVE_PMU_PHYS_BASE,
> +		.end    = DOVE_PMU_PHYS_BASE + 0x7,
> +		.flags  = IORESOURCE_MEM,
> +		.name   = "cpufreq: DFS"
> +	},
> +	[1] = {
> +		.start  = DOVE_PMU_PHYS_BASE + 0x8000,
> +		.end    = DOVE_PMU_PHYS_BASE + 0x8004,

BASE + 0x8004 - 1 ?

> +		.flags  = IORESOURCE_MEM,
> +		.name   = "cpufreq PMU CR"
> +	},
> +	[2] = {
> +		.start  = DOVE_PMU_PHYS_BASE + 0x0044,
> +		.end    = DOVE_PMU_PHYS_BASE + 0x0048,

ditto.

Sebastian

> +		.flags  = IORESOURCE_MEM,
> +		.name   = "cpufreq: PMU Clk Div"
> +	},
> +};
> +
> +static struct platform_device dove_cpufreq_device = {
> +	.name		= "dove-cpufreq",
> +	.id		= -1,
> +	.num_resources	= ARRAY_SIZE(dove_cpufreq_resources),
> +	.resource	= dove_cpufreq_resources,
> +};
> +
> +void __init dove_cpufreq_init(void)
> +{
> +	platform_device_register(&dove_cpufreq_device);
> +}
> +
>   void __init dove_setup_cpu_wins(void)
>   {
>   	/*
> diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
> index 1d72522..5c9a77b 100644
> --- a/arch/arm/mach-dove/common.h
> +++ b/arch/arm/mach-dove/common.h
> @@ -44,6 +44,7 @@ void dove_spi1_init(void);
>   void dove_i2c_init(void);
>   void dove_sdio0_init(void);
>   void dove_sdio1_init(void);
> +void dove_cpufreq_init(void);
>   void dove_restart(enum reboot_mode, const char *);
>
>   #endif
> diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
> index 0c4b35f..48db186 100644
> --- a/arch/arm/mach-dove/include/mach/dove.h
> +++ b/arch/arm/mach-dove/include/mach/dove.h
> @@ -144,6 +144,7 @@
>   #define  DOVE_SD0_GPIO_SEL		(1 << 0)
>
>   /* Power Management */
> +#define DOVE_PMU_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xd0000)
>   #define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0000)
>   #define DOVE_PMU_SIG_CTRL	(DOVE_PMU_VIRT_BASE + 0x802c)
>
>

  reply	other threads:[~2013-10-21 10:47 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-19 12:37 [PATCH 0/4] Dove cpufreq driver Andrew Lunn
2013-10-19 12:37 ` [PATCH 1/4] cpufreq: Add a cpufreq driver for Marvell Dove Andrew Lunn
2013-10-19 23:09   ` Luka Perkov
2013-10-20  8:42     ` Andrew Lunn
2013-10-21 10:42   ` Sebastian Hesselbarth
2013-10-21 15:42     ` Andrew Lunn
2013-10-21 16:38       ` Sebastian Hesselbarth
2013-10-22  9:01   ` Viresh Kumar
2013-10-22 15:57     ` Andrew Lunn
2013-10-23  4:29       ` Viresh Kumar
2013-10-22 10:19   ` Sudeep KarkadaNagesha
2013-10-19 12:37 ` [PATCH 2/4] mvebu: Dove: Instantiate cpufreq driver Andrew Lunn
2013-10-21 10:47   ` Sebastian Hesselbarth [this message]
2013-10-21 15:26     ` Andrew Lunn
2013-10-19 12:37 ` [PATCH 3/4] mvebu: Dove: Enable cpufreq driver in defconfig Andrew Lunn
2013-10-19 12:37 ` [PATCH 4/4] mvebu: Dove: Add clocks and DFS interrupt to cpu node in DT Andrew Lunn
  -- strict thread matches above, loose matches on Subject: below --
2013-10-23 13:04 [PATCH 1/4] cpufreq: Add a cpufreq driver for Marvell Dove Andrew Lunn
2013-10-23 13:04 ` [PATCH 2/4] mvebu: Dove: Instantiate cpufreq driver Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52650644.9010208@gmail.com \
    --to=sebastian.hesselbarth@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).