* [PATCH] include/linux/usb/usb_phy_gen_xceiv.h: check built-in or module for swithing usb_nop_xceiv_register() implementation
@ 2013-10-23 9:55 Chen Gang
2013-11-04 9:32 ` Chen Gang
2013-11-14 18:37 ` Tony Lindgren
0 siblings, 2 replies; 4+ messages in thread
From: Chen Gang @ 2013-10-23 9:55 UTC (permalink / raw)
To: linux-arm-kernel
When CONFIG_NOP_USB_XCEIV is as 'm', usb_nop_xceiv_register() will be
exported when the related module is loaded. So for built-in source
code, still need use the empty one.
Or it will can not pass compiling, the related error (for arm, with
allmodconfig):
arch/arm/mach-omap2/built-in.o: In function `omap3_evm_init':
arch/arm/mach-omap2/board-omap3evm.c:703: undefined reference to `usb_nop_xceiv_register'
Signed-off-by: Chen Gang <gang.chen@asianux.com>
---
include/linux/usb/usb_phy_gen_xceiv.h | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/include/linux/usb/usb_phy_gen_xceiv.h b/include/linux/usb/usb_phy_gen_xceiv.h
index f9a7e7b..8515958 100644
--- a/include/linux/usb/usb_phy_gen_xceiv.h
+++ b/include/linux/usb/usb_phy_gen_xceiv.h
@@ -12,7 +12,8 @@ struct usb_phy_gen_xceiv_platform_data {
unsigned int needs_reset:1;
};
-#if IS_ENABLED(CONFIG_NOP_USB_XCEIV)
+#if IS_BUILTIN(CONFIG_NOP_USB_XCEIV) || \
+ (IS_MODULE(CONFIG_NOP_USB_XCEIV) && defined(MODULE))
/* sometimes transceivers are accessed only through e.g. ULPI */
extern void usb_nop_xceiv_register(void);
extern void usb_nop_xceiv_unregister(void);
--
1.7.7.6
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH] include/linux/usb/usb_phy_gen_xceiv.h: check built-in or module for swithing usb_nop_xceiv_register() implementation
2013-10-23 9:55 [PATCH] include/linux/usb/usb_phy_gen_xceiv.h: check built-in or module for swithing usb_nop_xceiv_register() implementation Chen Gang
@ 2013-11-04 9:32 ` Chen Gang
2013-11-14 18:37 ` Tony Lindgren
1 sibling, 0 replies; 4+ messages in thread
From: Chen Gang @ 2013-11-04 9:32 UTC (permalink / raw)
To: linux-arm-kernel
Hello Maintainers:
Please help check this patch, when you have time.
Thanks.
On 10/23/2013 05:55 PM, Chen Gang wrote:
> When CONFIG_NOP_USB_XCEIV is as 'm', usb_nop_xceiv_register() will be
> exported when the related module is loaded. So for built-in source
> code, still need use the empty one.
>
> Or it will can not pass compiling, the related error (for arm, with
> allmodconfig):
>
> arch/arm/mach-omap2/built-in.o: In function `omap3_evm_init':
> arch/arm/mach-omap2/board-omap3evm.c:703: undefined reference to `usb_nop_xceiv_register'
>
>
> Signed-off-by: Chen Gang <gang.chen@asianux.com>
> ---
> include/linux/usb/usb_phy_gen_xceiv.h | 3 ++-
> 1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/include/linux/usb/usb_phy_gen_xceiv.h b/include/linux/usb/usb_phy_gen_xceiv.h
> index f9a7e7b..8515958 100644
> --- a/include/linux/usb/usb_phy_gen_xceiv.h
> +++ b/include/linux/usb/usb_phy_gen_xceiv.h
> @@ -12,7 +12,8 @@ struct usb_phy_gen_xceiv_platform_data {
> unsigned int needs_reset:1;
> };
>
> -#if IS_ENABLED(CONFIG_NOP_USB_XCEIV)
> +#if IS_BUILTIN(CONFIG_NOP_USB_XCEIV) || \
> + (IS_MODULE(CONFIG_NOP_USB_XCEIV) && defined(MODULE))
> /* sometimes transceivers are accessed only through e.g. ULPI */
> extern void usb_nop_xceiv_register(void);
> extern void usb_nop_xceiv_unregister(void);
>
--
Chen Gang
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH] include/linux/usb/usb_phy_gen_xceiv.h: check built-in or module for swithing usb_nop_xceiv_register() implementation
2013-10-23 9:55 [PATCH] include/linux/usb/usb_phy_gen_xceiv.h: check built-in or module for swithing usb_nop_xceiv_register() implementation Chen Gang
2013-11-04 9:32 ` Chen Gang
@ 2013-11-14 18:37 ` Tony Lindgren
2013-11-15 1:36 ` Chen Gang
1 sibling, 1 reply; 4+ messages in thread
From: Tony Lindgren @ 2013-11-14 18:37 UTC (permalink / raw)
To: linux-arm-kernel
* Chen Gang <gang.chen@asianux.com> [131023 02:57]:
> When CONFIG_NOP_USB_XCEIV is as 'm', usb_nop_xceiv_register() will be
> exported when the related module is loaded. So for built-in source
> code, still need use the empty one.
>
> Or it will can not pass compiling, the related error (for arm, with
> allmodconfig):
>
> arch/arm/mach-omap2/built-in.o: In function `omap3_evm_init':
> arch/arm/mach-omap2/board-omap3evm.c:703: undefined reference to `usb_nop_xceiv_register'
>
>
> Signed-off-by: Chen Gang <gang.chen@asianux.com>
Added Felipe to cc, he should probably deal with this one.
Regards,
Tony
> ---
> include/linux/usb/usb_phy_gen_xceiv.h | 3 ++-
> 1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/include/linux/usb/usb_phy_gen_xceiv.h b/include/linux/usb/usb_phy_gen_xceiv.h
> index f9a7e7b..8515958 100644
> --- a/include/linux/usb/usb_phy_gen_xceiv.h
> +++ b/include/linux/usb/usb_phy_gen_xceiv.h
> @@ -12,7 +12,8 @@ struct usb_phy_gen_xceiv_platform_data {
> unsigned int needs_reset:1;
> };
>
> -#if IS_ENABLED(CONFIG_NOP_USB_XCEIV)
> +#if IS_BUILTIN(CONFIG_NOP_USB_XCEIV) || \
> + (IS_MODULE(CONFIG_NOP_USB_XCEIV) && defined(MODULE))
> /* sometimes transceivers are accessed only through e.g. ULPI */
> extern void usb_nop_xceiv_register(void);
> extern void usb_nop_xceiv_unregister(void);
> --
> 1.7.7.6
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH] include/linux/usb/usb_phy_gen_xceiv.h: check built-in or module for swithing usb_nop_xceiv_register() implementation
2013-11-14 18:37 ` Tony Lindgren
@ 2013-11-15 1:36 ` Chen Gang
0 siblings, 0 replies; 4+ messages in thread
From: Chen Gang @ 2013-11-15 1:36 UTC (permalink / raw)
To: linux-arm-kernel
On 11/15/2013 02:37 AM, Tony Lindgren wrote:
> * Chen Gang <gang.chen@asianux.com> [131023 02:57]:
>> When CONFIG_NOP_USB_XCEIV is as 'm', usb_nop_xceiv_register() will be
>> exported when the related module is loaded. So for built-in source
>> code, still need use the empty one.
>>
>> Or it will can not pass compiling, the related error (for arm, with
>> allmodconfig):
>>
>> arch/arm/mach-omap2/built-in.o: In function `omap3_evm_init':
>> arch/arm/mach-omap2/board-omap3evm.c:703: undefined reference to `usb_nop_xceiv_register'
>>
>>
>> Signed-off-by: Chen Gang <gang.chen@asianux.com>
>
> Added Felipe to cc, he should probably deal with this one.
>
OK, thank you very much.
And welcome Felipe to help checking, when he has time.
:-)
> Regards,
>
> Tony
>
>> ---
>> include/linux/usb/usb_phy_gen_xceiv.h | 3 ++-
>> 1 files changed, 2 insertions(+), 1 deletions(-)
>>
>> diff --git a/include/linux/usb/usb_phy_gen_xceiv.h b/include/linux/usb/usb_phy_gen_xceiv.h
>> index f9a7e7b..8515958 100644
>> --- a/include/linux/usb/usb_phy_gen_xceiv.h
>> +++ b/include/linux/usb/usb_phy_gen_xceiv.h
>> @@ -12,7 +12,8 @@ struct usb_phy_gen_xceiv_platform_data {
>> unsigned int needs_reset:1;
>> };
>>
>> -#if IS_ENABLED(CONFIG_NOP_USB_XCEIV)
>> +#if IS_BUILTIN(CONFIG_NOP_USB_XCEIV) || \
>> + (IS_MODULE(CONFIG_NOP_USB_XCEIV) && defined(MODULE))
>> /* sometimes transceivers are accessed only through e.g. ULPI */
>> extern void usb_nop_xceiv_register(void);
>> extern void usb_nop_xceiv_unregister(void);
>> --
>> 1.7.7.6
>
>
--
Chen Gang
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-11-15 1:36 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-23 9:55 [PATCH] include/linux/usb/usb_phy_gen_xceiv.h: check built-in or module for swithing usb_nop_xceiv_register() implementation Chen Gang
2013-11-04 9:32 ` Chen Gang
2013-11-14 18:37 ` Tony Lindgren
2013-11-15 1:36 ` Chen Gang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).