* [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique.
@ 2013-10-23 8:29 Denis Carikli
2013-10-23 8:29 ` [PATCHv5][ 2/9] video: imxfb: Introduce regulator support Denis Carikli
` (9 more replies)
0 siblings, 10 replies; 14+ messages in thread
From: Denis Carikli @ 2013-10-23 8:29 UTC (permalink / raw)
To: linux-arm-kernel
Trivial patch to add Eukr?a Electromatique to the list
of devicetree vendor prefixes.
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: devicetree at vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
.../devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 2956800..a0329cf 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -25,6 +25,7 @@ denx Denx Software Engineering
emmicro EM Microelectronic
epson Seiko Epson Corp.
est ESTeem Wireless Modems
+eukrea Eukr?a Electromatique
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCHv5][ 2/9] video: imxfb: Introduce regulator support. 2013-10-23 8:29 [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique Denis Carikli @ 2013-10-23 8:29 ` Denis Carikli 2013-10-23 8:29 ` [PATCHv5][ 3/9] video: imxfb: Also add pwmr for the device tree Denis Carikli ` (8 subsequent siblings) 9 siblings, 0 replies; 14+ messages in thread From: Denis Carikli @ 2013-10-23 8:29 UTC (permalink / raw) To: linux-arm-kernel This commit is based on the following commit by Fabio Estevam: 4344429 video: mxsfb: Introduce regulator support Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel at lists.infradead.org Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev at vger.kernel.org Cc: Eric B?nard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> --- drivers/video/imxfb.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 44ee678..4bf3837 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -28,6 +28,7 @@ #include <linux/cpufreq.h> #include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #include <linux/dma-mapping.h> #include <linux/io.h> #include <linux/math64.h> @@ -145,6 +146,7 @@ struct imxfb_info { struct clk *clk_ipg; struct clk *clk_ahb; struct clk *clk_per; + struct regulator *reg_lcd; enum imxfb_type devtype; bool enabled; @@ -563,12 +565,23 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi) static void imxfb_enable_controller(struct imxfb_info *fbi) { + int ret; if (fbi->enabled) return; pr_debug("Enabling LCD controller\n"); + if (fbi->reg_lcd) { + ret = regulator_enable(fbi->reg_lcd); + if (ret) { + dev_err(&fbi->pdev->dev, + "lcd regulator enable failed with error: %d\n", + ret); + return; + } + } + writel(fbi->screen_dma, fbi->regs + LCDC_SSA); /* panning offset 0 (0 pixel offset) */ @@ -597,6 +610,8 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) static void imxfb_disable_controller(struct imxfb_info *fbi) { + int ret; + if (!fbi->enabled) return; @@ -613,6 +628,14 @@ static void imxfb_disable_controller(struct imxfb_info *fbi) fbi->enabled = false; writel(0, fbi->regs + LCDC_RMCR); + + if (fbi->reg_lcd) { + ret = regulator_disable(fbi->reg_lcd); + if (ret) + dev_err(&fbi->pdev->dev, + "lcd regulator disable failed with error: %d\n", + ret); + } } static int imxfb_blank(int blank, struct fb_info *info) @@ -1020,6 +1043,12 @@ static int imxfb_probe(struct platform_device *pdev) goto failed_register; } + fbi->reg_lcd = devm_regulator_get(&pdev->dev, "lcd"); + if (IS_ERR(fbi->reg_lcd)) { + dev_info(&pdev->dev, "No lcd regulator used.\n"); + fbi->reg_lcd = NULL; + } + imxfb_enable_controller(fbi); fbi->pdev = pdev; #ifdef PWMR_BACKLIGHT_AVAILABLE -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv5][ 3/9] video: imxfb: Also add pwmr for the device tree. 2013-10-23 8:29 [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique Denis Carikli 2013-10-23 8:29 ` [PATCHv5][ 2/9] video: imxfb: Introduce regulator support Denis Carikli @ 2013-10-23 8:29 ` Denis Carikli 2013-10-23 8:29 ` [PATCHv5][ 4/9] ARM: imx{25, 27} DT: Permit the selection of the imxfb framebuffer driver Denis Carikli ` (7 subsequent siblings) 9 siblings, 0 replies; 14+ messages in thread From: Denis Carikli @ 2013-10-23 8:29 UTC (permalink / raw) To: linux-arm-kernel pwmr has to be set to get the imxfb backlight work, though pwmr was only configurable trough the platform data. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree at vger.kernel.org Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev at vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel at lists.infradead.org Cc: Eric B?nard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> --- .../devicetree/bindings/video/fsl,imx-fb.txt | 3 +++ drivers/video/imxfb.c | 2 ++ 2 files changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt index 46da08d..ac457ae 100644 --- a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt @@ -17,6 +17,9 @@ Required nodes: Optional properties: - fsl,dmacr: DMA Control Register value. This is optional. By default, the register is not modified as recommended by the datasheet. +- fsl,pwmr: LCDC PWM Contrast Control Register value. That property is + optional, but defining it is necessary to get the backlight working. If that + property is ommited, the register is zeroed. - fsl,lscr1: LCDC Sharp Configuration Register value. Example: diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 4bf3837..f09372d 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -833,6 +833,8 @@ static int imxfb_init_fbinfo(struct platform_device *pdev) of_property_read_u32(np, "fsl,dmacr", &fbi->dmacr); + of_property_read_u32(np, "fsl,pwmr", &fbi->pwmr); + /* These two function pointers could be used by some specific * platforms. */ fbi->lcd_power = NULL; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv5][ 4/9] ARM: imx{25, 27} DT: Permit the selection of the imxfb framebuffer driver. 2013-10-23 8:29 [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique Denis Carikli 2013-10-23 8:29 ` [PATCHv5][ 2/9] video: imxfb: Introduce regulator support Denis Carikli 2013-10-23 8:29 ` [PATCHv5][ 3/9] video: imxfb: Also add pwmr for the device tree Denis Carikli @ 2013-10-23 8:29 ` Denis Carikli 2013-10-24 6:32 ` [PATCHv5][ 4/9] ARM: imx{25,27} " Shawn Guo 2013-10-23 8:29 ` [PATCHv5][ 5/9] pinctrl: pinctrl-imx: add imx25 pinctrl driver Denis Carikli ` (6 subsequent siblings) 9 siblings, 1 reply; 14+ messages in thread From: Denis Carikli @ 2013-10-23 8:29 UTC (permalink / raw) To: linux-arm-kernel Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree at vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel at lists.infradead.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Eric B?nard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> --- arch/arm/mach-imx/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 9f67338..23c1773 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -254,6 +254,7 @@ endchoice config MACH_IMX25_DT bool "Support i.MX25 platforms from device tree" select SOC_IMX25 + select IMX_HAVE_PLATFORM_IMX_FB help Include support for Freescale i.MX25 based platforms using the device tree for discovery @@ -442,6 +443,7 @@ config MACH_IMX27IPCAM config MACH_IMX27_DT bool "Support i.MX27 platforms from device tree" select SOC_IMX27 + select IMX_HAVE_PLATFORM_IMX_FB help Include support for Freescale i.MX27 based platforms using the device tree for discovery -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv5][ 4/9] ARM: imx{25,27} DT: Permit the selection of the imxfb framebuffer driver. 2013-10-23 8:29 ` [PATCHv5][ 4/9] ARM: imx{25, 27} DT: Permit the selection of the imxfb framebuffer driver Denis Carikli @ 2013-10-24 6:32 ` Shawn Guo 0 siblings, 0 replies; 14+ messages in thread From: Shawn Guo @ 2013-10-24 6:32 UTC (permalink / raw) To: linux-arm-kernel On Wed, Oct 23, 2013 at 10:29:29AM +0200, Denis Carikli wrote: > Cc: Rob Herring <rob.herring@calxeda.com> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Stephen Warren <swarren@wwwdotorg.org> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Cc: devicetree at vger.kernel.org > Cc: Sascha Hauer <kernel@pengutronix.de> > Cc: linux-arm-kernel at lists.infradead.org > Cc: Russell King <linux@arm.linux.org.uk> > Cc: Eric B?nard <eric@eukrea.com> > > Signed-off-by: Denis Carikli <denis@eukrea.com> Can you please write up a sensible commit log to help me understand why device tree build needs to select IMX_HAVE_PLATFORM_IMX_FB? Shawn > --- > arch/arm/mach-imx/Kconfig | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 9f67338..23c1773 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -254,6 +254,7 @@ endchoice > config MACH_IMX25_DT > bool "Support i.MX25 platforms from device tree" > select SOC_IMX25 > + select IMX_HAVE_PLATFORM_IMX_FB > help > Include support for Freescale i.MX25 based platforms > using the device tree for discovery > @@ -442,6 +443,7 @@ config MACH_IMX27IPCAM > config MACH_IMX27_DT > bool "Support i.MX27 platforms from device tree" > select SOC_IMX27 > + select IMX_HAVE_PLATFORM_IMX_FB > help > Include support for Freescale i.MX27 based platforms > using the device tree for discovery > -- > 1.7.9.5 > ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCHv5][ 5/9] pinctrl: pinctrl-imx: add imx25 pinctrl driver 2013-10-23 8:29 [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique Denis Carikli ` (2 preceding siblings ...) 2013-10-23 8:29 ` [PATCHv5][ 4/9] ARM: imx{25, 27} DT: Permit the selection of the imxfb framebuffer driver Denis Carikli @ 2013-10-23 8:29 ` Denis Carikli 2013-10-24 6:36 ` Shawn Guo 2013-10-23 8:29 ` [PATCHv5][ 6/9] ARM: dts: imx25.dtsi: Add some pinmux pins Denis Carikli ` (5 subsequent siblings) 9 siblings, 1 reply; 14+ messages in thread From: Denis Carikli @ 2013-10-23 8:29 UTC (permalink / raw) To: linux-arm-kernel This is mostly cut and paste from the imx35 pinctrl driver. The data was generated using sed and awk on arch/arm/plat-mxc/include/mach/iomux-mx25.h. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree at vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel at lists.infradead.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Eric B?nard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> --- .../bindings/pinctrl/fsl,imx25-pinctrl.txt | 33 ++ arch/arm/boot/dts/imx25-pinfunc.h | 513 ++++++++++++++++++++ arch/arm/boot/dts/imx25.dtsi | 1 + arch/arm/mach-imx/Kconfig | 2 + drivers/pinctrl/Kconfig | 8 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-imx25.c | 351 ++++++++++++++ 7 files changed, 909 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt create mode 100644 arch/arm/boot/dts/imx25-pinfunc.h create mode 100644 drivers/pinctrl/pinctrl-imx25.c diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt new file mode 100644 index 0000000..64906ca --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt @@ -0,0 +1,33 @@ +* Freescale IMX25 IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx25-iomuxc" +- fsl,pins: two integers array, represents a group of pins mux and config + setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a + pin working on a specific function, CONFIG is the pad setting value like + pull-up for this pin. Please refer to imx25 datasheet for the valid pad + config settings. + +CONFIG bits definition: +PAD_CTL_DRIVE_VOLAGAGE_18 (1 << 13) +PAD_CTL_DRIVE_VOLAGAGE_33 (0 << 13) +PAD_CTL_HYS (1 << 8) +PAD_CTL_PKE (1 << 7) +PAD_CTL_PUE (1 << 6) +PAD_CTL_PUS_100K_DOWN (0 << 4) +PAD_CTL_PUS_47K_UP (1 << 4) +PAD_CTL_PUS_100K_UP (2 << 4) +PAD_CTL_PUS_22K_UP (3 << 4) +PAD_CTL_ODE_CMOS (0 << 3) +PAD_CTL_ODE_OPENDRAIN (1 << 3) +PAD_CTL_DSE_NOMINAL (0 << 1) +PAD_CTL_DSE_HIGH (1 << 1) +PAD_CTL_DSE_MAX (2 << 1) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) + +Refer to imx25-pinfunc.h in device tree source folder for all available +imx25 PIN_FUNC_ID. diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h new file mode 100644 index 0000000..0a9f9a2 --- /dev/null +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -0,0 +1,513 @@ +/* + * Copyright 2013 Eukr?a Electromatique <denis@eukrea.com> + * Based on imx35-pinfunc.h in the same directory Which is: + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX25_PINFUNC_H +#define __DTS_IMX25_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ + +#define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000 +#define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000 + +#define MX25_PAD_A13__A13 0x00c 0x22C 0x000 0x00 0x000 +#define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000 + +#define MX25_PAD_A14__A14 0x010 0x230 0x000 0x10 0x000 +#define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x15 0x000 + +#define MX25_PAD_A15__A15 0x014 0x234 0x000 0x10 0x000 +#define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x15 0x000 + +#define MX25_PAD_A16__A16 0x018 0x000 0x000 0x10 0x000 +#define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x15 0x000 + +#define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x10 0x000 +#define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x15 0x000 + +#define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x10 0x000 +#define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x15 0x000 +#define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x17 0x000 + +#define MX25_PAD_A19__A19 0x024 0x240 0x000 0x10 0x000 +#define MX25_PAD_A19__FEC_RX_ER 0x024 0x240 0x518 0x17 0x000 +#define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x15 0x000 + +#define MX25_PAD_A20__A20 0x028 0x244 0x000 0x10 0x000 +#define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x15 0x000 +#define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x17 0x000 + +#define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x10 0x000 +#define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x15 0x000 +#define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x17 0x000 + +#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x10 0x000 +#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x15 0x000 + +#define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x10 0x000 +#define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x15 0x000 + +#define MX25_PAD_A24__A24 0x038 0x250 0x000 0x10 0x000 +#define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x15 0x000 +#define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x17 0x000 + +#define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x10 0x000 +#define MX25_PAD_A25__GPIO_2_11 0x03c 0x254 0x000 0x15 0x000 +#define MX25_PAD_A25__FEC_CRS 0x03c 0x254 0x508 0x17 0x000 + +#define MX25_PAD_EB0__EB0 0x040 0x258 0x000 0x10 0x000 +#define MX25_PAD_EB0__AUD4_TXD 0x040 0x258 0x464 0x14 0x000 +#define MX25_PAD_EB0__GPIO_2_12 0x040 0x258 0x000 0x15 0x000 + +#define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x10 0x000 +#define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x14 0x000 +#define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x15 0x000 + +#define MX25_PAD_OE__OE 0x048 0x260 0x000 0x10 0x000 +#define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x14 0x000 +#define MX25_PAD_OE__GPIO_2_14 0x048 0x260 0x000 0x15 0x000 + +#define MX25_PAD_CS0__CS0 0x04c 0x000 0x000 0x00 0x000 +#define MX25_PAD_CS0__GPIO_4_2 0x04c 0x000 0x000 0x05 0x000 + +#define MX25_PAD_CS1__CS1 0x050 0x000 0x000 0x00 0x000 +#define MX25_PAD_CS1__NF_CE3 0x050 0x000 0x000 0x01 0x000 +#define MX25_PAD_CS1__GPIO_4_3 0x050 0x000 0x000 0x05 0x000 + +#define MX25_PAD_CS4__CS4 0x054 0x264 0x000 0x10 0x000 +#define MX25_PAD_CS4__NF_CE1 0x054 0x264 0x000 0x01 0x000 +#define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x13 0x000 +#define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x15 0x000 + +#define MX25_PAD_CS5__CS5 0x058 0x268 0x000 0x10 0x000 +#define MX25_PAD_CS5__NF_CE2 0x058 0x268 0x000 0x01 0x000 +#define MX25_PAD_CS5__UART5_RTS 0x058 0x268 0x574 0x13 0x000 +#define MX25_PAD_CS5__GPIO_3_21 0x058 0x268 0x000 0x15 0x000 + +#define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x10 0x000 +#define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x15 0x000 + +#define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x10 0x000 +#define MX25_PAD_ECB__UART5_TXD_MUX 0x060 0x270 0x000 0x13 0x000 +#define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x15 0x000 + +#define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x10 0x000 +#define MX25_PAD_LBA__UART5_RXD_MUX 0x064 0x274 0x578 0x13 0x000 +#define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x15 0x000 + +#define MX25_PAD_BCLK__BCLK 0x068 0x000 0x000 0x00 0x000 +#define MX25_PAD_BCLK__GPIO_4_4 0x068 0x000 0x000 0x05 0x000 + +#define MX25_PAD_RW__RW 0x06c 0x278 0x000 0x10 0x000 +#define MX25_PAD_RW__AUD4_TXFS 0x06c 0x278 0x474 0x14 0x000 +#define MX25_PAD_RW__GPIO_3_25 0x06c 0x278 0x000 0x15 0x000 + +#define MX25_PAD_NFWE_B__NFWE_B 0x070 0x000 0x000 0x10 0x000 +#define MX25_PAD_NFWE_B__GPIO_3_26 0x070 0x000 0x000 0x15 0x000 + +#define MX25_PAD_NFRE_B__NFRE_B 0x074 0x000 0x000 0x10 0x000 +#define MX25_PAD_NFRE_B__GPIO_3_27 0x074 0x000 0x000 0x15 0x000 + +#define MX25_PAD_NFALE__NFALE 0x078 0x000 0x000 0x10 0x000 +#define MX25_PAD_NFALE__GPIO_3_28 0x078 0x000 0x000 0x15 0x000 + +#define MX25_PAD_NFCLE__NFCLE 0x07c 0x000 0x000 0x10 0x000 +#define MX25_PAD_NFCLE__GPIO_3_29 0x07c 0x000 0x000 0x15 0x000 + +#define MX25_PAD_NFWP_B__NFWP_B 0x080 0x000 0x000 0x10 0x000 +#define MX25_PAD_NFWP_B__GPIO_3_30 0x080 0x000 0x000 0x15 0x000 + +#define MX25_PAD_NFRB__NFRB 0x084 0x27c 0x000 0x10 0x000 +#define MX25_PAD_NFRB__GPIO_3_31 0x084 0x27c 0x000 0x15 0x000 + +#define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000 +#define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000 +#define MX25_PAD_D15__GPIO_4_5 0x088 0x280 0x000 0x05 0x000 + +#define MX25_PAD_D14__D14 0x08c 0x284 0x000 0x00 0x000 +#define MX25_PAD_D14__LD17 0x08c 0x284 0x000 0x01 0x000 +#define MX25_PAD_D14__GPIO_4_6 0x08c 0x284 0x000 0x05 0x000 + +#define MX25_PAD_D13__D13 0x090 0x288 0x000 0x00 0x000 +#define MX25_PAD_D13__LD18 0x090 0x288 0x000 0x01 0x000 +#define MX25_PAD_D13__GPIO_4_7 0x090 0x288 0x000 0x05 0x000 + +#define MX25_PAD_D12__D12 0x094 0x28c 0x000 0x00 0x000 +#define MX25_PAD_D12__GPIO_4_8 0x094 0x28c 0x000 0x05 0x000 + +#define MX25_PAD_D11__D11 0x098 0x290 0x000 0x00 0x000 +#define MX25_PAD_D11__GPIO_4_9 0x098 0x290 0x000 0x05 0x000 + +#define MX25_PAD_D10__D10 0x09c 0x294 0x000 0x00 0x000 +#define MX25_PAD_D10__GPIO_4_10 0x09c 0x294 0x000 0x05 0x000 +#define MX25_PAD_D10__USBOTG_OC 0x09c 0x294 0x57c 0x06 0x000 + +#define MX25_PAD_D9__D9 0x0a0 0x298 0x000 0x00 0x000 +#define MX25_PAD_D9__GPIO_4_11 0x0a0 0x298 0x000 0x05 0x000 +#define MX25_PAD_D9__USBH2_PWR 0x0a0 0x298 0x000 0x06 0x000 + +#define MX25_PAD_D8__D8 0x0a4 0x29c 0x000 0x00 0x000 +#define MX25_PAD_D8__GPIO_4_12 0x0a4 0x29c 0x000 0x05 0x000 +#define MX25_PAD_D8__USBH2_OC 0x0a4 0x29c 0x580 0x06 0x000 + +#define MX25_PAD_D7__D7 0x0a8 0x2a0 0x000 0x00 0x000 +#define MX25_PAD_D7__GPIO_4_13 0x0a8 0x2a0 0x000 0x05 0x000 + +#define MX25_PAD_D6__D6 0x0ac 0x2a4 0x000 0x00 0x000 +#define MX25_PAD_D6__GPIO_4_14 0x0ac 0x2a4 0x000 0x05 0x000 + +#define MX25_PAD_D5__D5 0x0b0 0x2a8 0x000 0x00 0x000 +#define MX25_PAD_D5__GPIO_4_15 0x0b0 0x2a8 0x000 0x05 0x000 + +#define MX25_PAD_D4__D4 0x0b4 0x2ac 0x000 0x00 0x000 +#define MX25_PAD_D4__GPIO_4_16 0x0b4 0x2ac 0x000 0x05 0x000 + +#define MX25_PAD_D3__D3 0x0b8 0x2b0 0x000 0x00 0x000 +#define MX25_PAD_D3__GPIO_4_17 0x0b8 0x2b0 0x000 0x05 0x000 + +#define MX25_PAD_D2__D2 0x0bc 0x2b4 0x000 0x00 0x000 +#define MX25_PAD_D2__GPIO_4_18 0x0bc 0x2b4 0x000 0x05 0x000 + +#define MX25_PAD_D1__D1 0x0c0 0x2b8 0x000 0x00 0x000 +#define MX25_PAD_D1__GPIO_4_19 0x0c0 0x2b8 0x000 0x05 0x000 + +#define MX25_PAD_D0__D0 0x0c4 0x2bc 0x000 0x00 0x000 +#define MX25_PAD_D0__GPIO_4_20 0x0c4 0x2bc 0x000 0x05 0x000 + +#define MX25_PAD_LD0__LD0 0x0c8 0x2c0 0x000 0x10 0x000 +#define MX25_PAD_LD0__CSI_D0 0x0c8 0x2c0 0x488 0x12 0x000 +#define MX25_PAD_LD0__GPIO_2_15 0x0c8 0x2c0 0x000 0x15 0x000 + +#define MX25_PAD_LD1__LD1 0x0cc 0x2c4 0x000 0x10 0x000 +#define MX25_PAD_LD1__CSI_D1 0x0cc 0x2c4 0x48c 0x12 0x000 +#define MX25_PAD_LD1__GPIO_2_16 0x0cc 0x2c4 0x000 0x15 0x000 + +#define MX25_PAD_LD2__LD2 0x0d0 0x2c8 0x000 0x10 0x000 +#define MX25_PAD_LD2__GPIO_2_17 0x0d0 0x2c8 0x000 0x15 0x000 + +#define MX25_PAD_LD3__LD3 0x0d4 0x2cc 0x000 0x10 0x000 +#define MX25_PAD_LD3__GPIO_2_18 0x0d4 0x2cc 0x000 0x15 0x000 + +#define MX25_PAD_LD4__LD4 0x0d8 0x2d0 0x000 0x10 0x000 +#define MX25_PAD_LD4__GPIO_2_19 0x0d8 0x2d0 0x000 0x15 0x000 + +#define MX25_PAD_LD5__LD5 0x0dc 0x2d4 0x000 0x10 0x000 +#define MX25_PAD_LD5__GPIO_1_19 0x0dc 0x2d4 0x000 0x15 0x000 + +#define MX25_PAD_LD6__LD6 0x0e0 0x2d8 0x000 0x10 0x000 +#define MX25_PAD_LD6__GPIO_1_20 0x0e0 0x2d8 0x000 0x15 0x000 + +#define MX25_PAD_LD7__LD7 0x0e4 0x2dc 0x000 0x10 0x000 +#define MX25_PAD_LD7__GPIO_1_21 0x0e4 0x2dc 0x000 0x15 0x000 + +#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000 +#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000 + +#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000 +#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001 + +#define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x10 0x000 +#define MX25_PAD_LD10__FEC_RX_ER 0x0f0 0x2e8 0x518 0x15 0x001 + +#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000 +#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001 + +#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x10 0x000 +#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x15 0x001 + +#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x10 0x000 +#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x15 0x000 + +#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x10 0x000 +#define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x15 0x000 + +#define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x10 0x000 +#define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x15 0x001 + +#define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x10 0x000 +#define MX25_PAD_HSYNC__GPIO_1_22 0x108 0x300 0x000 0x15 0x000 + +#define MX25_PAD_VSYNC__VSYNC 0x10c 0x304 0x000 0x10 0x000 +#define MX25_PAD_VSYNC__GPIO_1_23 0x10c 0x304 0x000 0x15 0x000 + +#define MX25_PAD_LSCLK__LSCLK 0x110 0x308 0x000 0x10 0x000 +#define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x15 0x000 + +#define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x10 0x000 +#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000 + +#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000 +#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x14 0x000 +#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x15 0x001 + +#define MX25_PAD_PWM__PWM 0x11c 0x314 0x000 0x10 0x000 +#define MX25_PAD_PWM__GPIO_1_26 0x11c 0x314 0x000 0x15 0x000 +#define MX25_PAD_PWM__USBH2_OC 0x11c 0x314 0x580 0x16 0x001 + +#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000 +#define MX25_PAD_CSI_D2__UART5_RXD_MUX 0x120 0x318 0x578 0x11 0x001 +#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000 +#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000 + +#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000 +#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000 +#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001 + +#define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x10 0x000 +#define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x11 0x001 +#define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x15 0x000 +#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000 + +#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000 +#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000 +#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000 + +#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000 +#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000 + +#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000 +#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000 + +#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000 +#define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000 + +#define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000 +#define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000 + +#define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000 +#define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000 + +#define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000 +#define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000 + +#define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000 +#define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000 + +#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000 +#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000 + +#define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x10 0x000 +#define MX25_PAD_I2C1_CLK__GPIO_1_12 0x150 0x348 0x000 0x15 0x000 + +#define MX25_PAD_I2C1_DAT__I2C1_DAT 0x154 0x34c 0x000 0x10 0x000 +#define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x15 0x000 + +#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x15 0x000 + +#define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x15 0x000 + +#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x15 0x000 + +#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 0x164 0x35c 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_SS1__GPIO_1_17 0x164 0x35c 0x000 0x15 0x000 + +#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x15 0x000 + +#define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_RDY__GPIO_2_22 0x16c 0x364 0x000 0x15 0x000 + +#define MX25_PAD_UART1_RXD__UART1_RXD 0x170 0x368 0x000 0x10 0x000 +#define MX25_PAD_UART1_RXD__GPIO_4_22 0x170 0x368 0x000 0x15 0x000 + +#define MX25_PAD_UART1_TXD__UART1_TXD 0x174 0x36c 0x000 0x10 0x000 +#define MX25_PAD_UART1_TXD__GPIO_4_23 0x174 0x36c 0x000 0x15 0x000 + +#define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x10 0x000 +#define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x11 0x001 +#define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x15 0x000 + +#define MX25_PAD_UART1_CTS__UART1_CTS 0x17c 0x374 0x000 0x10 0x000 +#define MX25_PAD_UART1_CTS__CSI_D1 0x17c 0x374 0x48c 0x11 0x001 +#define MX25_PAD_UART1_CTS__GPIO_4_25 0x17c 0x374 0x000 0x15 0x000 + +#define MX25_PAD_UART2_RXD__UART2_RXD 0x180 0x378 0x000 0x10 0x000 +#define MX25_PAD_UART2_RXD__GPIO_4_26 0x180 0x378 0x000 0x15 0x000 + +#define MX25_PAD_UART2_TXD__UART2_TXD 0x184 0x37c 0x000 0x10 0x000 +#define MX25_PAD_UART2_TXD__GPIO_4_27 0x184 0x37c 0x000 0x15 0x000 + +#define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x10 0x000 +#define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x12 0x002 +#define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000 + +#define MX25_PAD_UART2_CTS__FEC_RX_ER 0x18c 0x384 0x518 0x12 0x002 +#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x10 0x000 +#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000 + +#define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000 +#define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x12 0x002 +#define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x15 0x000 + +#define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x10 0x000 +#define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x12 0x002 +#define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x15 0x000 + +#define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x10 0x000 +#define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x15 0x000 + +#define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x10 0x000 +#define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x13 0x000 +#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x15 0x000 + +#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x10 0x000 +#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x15 0x002 +#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x15 0x000 + +#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x10 0x000 +#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x10 0x002 +#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000 + +#define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x10 0x000 +#define MX25_PAD_KPP_ROW0__GPIO_2_29 0x1a8 0x3a0 0x000 0x15 0x000 + +#define MX25_PAD_KPP_ROW1__KPP_ROW1 0x1ac 0x3a4 0x000 0x10 0x000 +#define MX25_PAD_KPP_ROW1__GPIO_2_30 0x1ac 0x3a4 0x000 0x15 0x000 + +#define MX25_PAD_KPP_ROW2__KPP_ROW2 0x1b0 0x3a8 0x000 0x10 0x000 +#define MX25_PAD_KPP_ROW2__CSI_D0 0x1b0 0x3a8 0x488 0x13 0x002 +#define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x15 0x000 + +#define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x10 0x000 +#define MX25_PAD_KPP_ROW3__CSI_LD1 0x1b4 0x3ac 0x48c 0x13 0x002 +#define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x15 0x000 + +#define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x10 0x000 +#define MX25_PAD_KPP_COL0__UART4_RXD_MUX 0x1b8 0x3b0 0x570 0x11 0x001 +#define MX25_PAD_KPP_COL0__AUD5_TXD 0x1b8 0x3b0 0x000 0x12 0x000 +#define MX25_PAD_KPP_COL0__GPIO_3_1 0x1b8 0x3b0 0x000 0x15 0x000 + +#define MX25_PAD_KPP_COL1__KPP_COL1 0x1bc 0x3b4 0x000 0x10 0x000 +#define MX25_PAD_KPP_COL1__UART4_TXD_MUX 0x1bc 0x3b4 0x000 0x11 0x000 +#define MX25_PAD_KPP_COL1__AUD5_RXD 0x1bc 0x3b4 0x000 0x12 0x000 +#define MX25_PAD_KPP_COL1__GPIO_3_2 0x1bc 0x3b4 0x000 0x15 0x000 + +#define MX25_PAD_KPP_COL2__KPP_COL2 0x1c0 0x3b8 0x000 0x10 0x000 +#define MX25_PAD_KPP_COL2__UART4_RTS 0x1c0 0x3b8 0x000 0x11 0x000 +#define MX25_PAD_KPP_COL2__AUD5_TXC 0x1c0 0x3b8 0x000 0x12 0x000 +#define MX25_PAD_KPP_COL2__GPIO_3_3 0x1c0 0x3b8 0x000 0x15 0x000 + +#define MX25_PAD_KPP_COL3__KPP_COL3 0x1c4 0x3bc 0x000 0x10 0x000 +#define MX25_PAD_KPP_COL3__UART4_CTS 0x1c4 0x3bc 0x000 0x11 0x000 +#define MX25_PAD_KPP_COL3__AUD5_TXFS 0x1c4 0x3bc 0x000 0x12 0x000 +#define MX25_PAD_KPP_COL3__GPIO_3_4 0x1c4 0x3bc 0x000 0x15 0x000 + +#define MX25_PAD_FEC_MDC__FEC_MDC 0x1c8 0x3c0 0x000 0x10 0x000 +#define MX25_PAD_FEC_MDC__AUD4_TXD 0x1c8 0x3c0 0x464 0x12 0x001 +#define MX25_PAD_FEC_MDC__GPIO_3_5 0x1c8 0x3c0 0x000 0x15 0x000 + +#define MX25_PAD_FEC_MDIO__FEC_MDIO 0x1cc 0x3c4 0x000 0x10 0x000 +#define MX25_PAD_FEC_MDIO__AUD4_RXD 0x1cc 0x3c4 0x460 0x12 0x001 +#define MX25_PAD_FEC_MDIO__GPIO_3_6 0x1cc 0x3c4 0x000 0x15 0x000 + +#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x1d0 0x3c8 0x000 0x10 0x000 +#define MX25_PAD_FEC_TDATA0__GPIO_3_7 0x1d0 0x3c8 0x000 0x15 0x000 + +#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x1d4 0x3cc 0x000 0x10 0x000 +#define MX25_PAD_FEC_TDATA1__AUD4_TXFS 0x1d4 0x3cc 0x474 0x12 0x001 +#define MX25_PAD_FEC_TDATA1__GPIO_3_8 0x1d4 0x3cc 0x000 0x15 0x000 + +#define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x10 0x000 +#define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x15 0x000 + +#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x10 0x000 +#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x15 0x000 + +#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x10 0x000 +#define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x15 0x000 + +#define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x10 0x000 +#define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x14 0x000 +#define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x15 0x000 + +#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1e8 0x3e0 0x000 0x10 0x000 +#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 0x1e8 0x3e0 0x000 0x15 0x000 + +#define MX25_PAD_RTCK__RTCK 0x1ec 0x3e4 0x000 0x10 0x000 +#define MX25_PAD_RTCK__OWIRE 0x1ec 0x3e4 0x000 0x11 0x000 +#define MX25_PAD_RTCK__GPIO_3_14 0x1ec 0x3e4 0x000 0x15 0x000 + +#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x10 0x000 +#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x15 0x000 + +#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000 + +#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x10 0x000 +#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x16 0x000 +#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x12 0x000 + +#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x10 0x000 +#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001 +#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x12 0x001 + +#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x10 0x000 +#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000 + +#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000 +#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000 +#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001 + +#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000 +#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000 +#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000 + +#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000 +#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000 + +#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000 +#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x15 0x000 + +#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK 0x210 0x000 0x000 0x10 0x000 +#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 0x210 0x000 0x000 0x15 0x000 + +#define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x10 0x000 +#define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x14 0x000 +#define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x15 0x000 +#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000 +#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000 + +#define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x10 0x000 +#define MX25_PAD_POWER_FAIL__AUD7_RXD 0x21c 0x410 0x478 0x14 0x001 +#define MX25_PAD_POWER_FAIL__GPIO_3_19 0x21c 0x410 0x000 0x15 0x000 + +#define MX25_PAD_CLKO__CLKO 0x220 0x414 0x000 0x10 0x000 +#define MX25_PAD_CLKO__GPIO_2_21 0x220 0x414 0x000 0x15 0x000 + +#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 0x224 0x000 0x000 0x00 0x000 +#define MX25_PAD_BOOT_MODE0__GPIO_4_30 0x224 0x000 0x000 0x05 0x000 +#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 0x228 0x000 0x000 0x00 0x000 +#define MX25_PAD_BOOT_MODE1__GPIO_4_31 0x228 0x000 0x000 0x05 0x000 + +#define MX25_PAD_CTL_GRP_DVS_MISC 0x000 0x418 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DSE_FEC 0x000 0x41c 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DVS_JTAG 0x000 0x420 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DSE_NFC 0x000 0x424 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DSE_CSI 0x000 0x428 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DSE_WEIM 0x000 0x42c 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DSE_DDR 0x000 0x430 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DVS_CRM 0x000 0x434 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DSE_KPP 0x000 0x438 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DSE_SDHC1 0x000 0x43c 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DSE_LCD 0x000 0x440 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DSE_UART 0x000 0x444 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DVS_NFC 0x000 0x448 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DVS_CSI 0x000 0x44c 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DSE_CSPI1 0x000 0x450 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DDRTYPE 0x000 0x454 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DVS_SDHC1 0x000 0x458 0x000 0x00 0x000 +#define MX25_PAD_CTL_GRP_DVS_LCD 0x000 0x45c 0x000 0x00 0x000 + +#endif /* __DTS_IMX25_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 737ed5d..5f9879d 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -10,6 +10,7 @@ */ #include "skeleton.dtsi" +#include "imx25-pinfunc.h" / { aliases { diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 23c1773..a0588bf 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -111,6 +111,8 @@ config SOC_IMX25 select COMMON_CLK select CPU_ARM926T select MXC_AVIC + select PINCTRL + select PINCTRL_IMX25 config SOC_IMX27 bool diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 21db201..d801589 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -98,6 +98,14 @@ config PINCTRL_IMX select PINMUX select PINCONF +config PINCTRL_IMX25 + bool "IMX25 pinctrl driver" + depends on OF + depends on SOC_IMX25 + select PINCTRL_IMX + help + Say Y here to enable the imx25 pinctrl driver + config PINCTRL_IMX35 bool "IMX35 pinctrl driver" depends on OF diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index bbeb980..32a856e 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_PINCTRL_IMX6SL) += pinctrl-imx6sl.o obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o +obj-$(CONFIG_PINCTRL_IMX25) += pinctrl-imx25.o obj-$(CONFIG_PINCTRL_IMX28) += pinctrl-imx28.o obj-$(CONFIG_PINCTRL_NOMADIK) += pinctrl-nomadik.o obj-$(CONFIG_PINCTRL_STN8815) += pinctrl-nomadik-stn8815.o diff --git a/drivers/pinctrl/pinctrl-imx25.c b/drivers/pinctrl/pinctrl-imx25.c new file mode 100644 index 0000000..8994b43 --- /dev/null +++ b/drivers/pinctrl/pinctrl-imx25.c @@ -0,0 +1,351 @@ +/* + * imx25 pinctrl driver. + * + * Copyright 2013 Eukr?a Electromatique <denis@eukrea.com> + * + * This driver was mostly copied from the imx51 pinctrl driver which has: + * + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2012 Linaro, Inc. + * + * Author: Dong Aisheng <dong.aisheng@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-imx.h" + +enum imx25_pads { + MX25_PAD_RESERVE0 = 1, + MX25_PAD_RESERVE1 = 2, + MX25_PAD_A10 = 3, + MX25_PAD_A13 = 4, + MX25_PAD_A14 = 5, + MX25_PAD_A15 = 6, + MX25_PAD_A16 = 7, + MX25_PAD_A17 = 8, + MX25_PAD_A18 = 9, + MX25_PAD_A19 = 10, + MX25_PAD_A20 = 11, + MX25_PAD_A21 = 12, + MX25_PAD_A22 = 13, + MX25_PAD_A23 = 14, + MX25_PAD_A24 = 15, + MX25_PAD_A25 = 16, + MX25_PAD_EB0 = 17, + MX25_PAD_EB1 = 18, + MX25_PAD_OE = 19, + MX25_PAD_CS0 = 20, + MX25_PAD_CS1 = 21, + MX25_PAD_CS4 = 22, + MX25_PAD_CS5 = 23, + MX25_PAD_NF_CE0 = 24, + MX25_PAD_ECB = 25, + MX25_PAD_LBA = 26, + MX25_PAD_BCLK = 27, + MX25_PAD_RW = 28, + MX25_PAD_NFWE_B = 29, + MX25_PAD_NFRE_B = 30, + MX25_PAD_NFALE = 31, + MX25_PAD_NFCLE = 32, + MX25_PAD_NFWP_B = 33, + MX25_PAD_NFRB = 34, + MX25_PAD_D15 = 35, + MX25_PAD_D14 = 36, + MX25_PAD_D13 = 37, + MX25_PAD_D12 = 38, + MX25_PAD_D11 = 39, + MX25_PAD_D10 = 40, + MX25_PAD_D9 = 41, + MX25_PAD_D8 = 42, + MX25_PAD_D7 = 43, + MX25_PAD_D6 = 44, + MX25_PAD_D5 = 45, + MX25_PAD_D4 = 46, + MX25_PAD_D3 = 47, + MX25_PAD_D2 = 48, + MX25_PAD_D1 = 49, + MX25_PAD_D0 = 50, + MX25_PAD_LD0 = 51, + MX25_PAD_LD1 = 52, + MX25_PAD_LD2 = 53, + MX25_PAD_LD3 = 54, + MX25_PAD_LD4 = 55, + MX25_PAD_LD5 = 56, + MX25_PAD_LD6 = 57, + MX25_PAD_LD7 = 58, + MX25_PAD_LD8 = 59, + MX25_PAD_LD9 = 60, + MX25_PAD_LD10 = 61, + MX25_PAD_LD11 = 62, + MX25_PAD_LD12 = 63, + MX25_PAD_LD13 = 64, + MX25_PAD_LD14 = 65, + MX25_PAD_LD15 = 66, + MX25_PAD_HSYNC = 67, + MX25_PAD_VSYNC = 68, + MX25_PAD_LSCLK = 69, + MX25_PAD_OE_ACD = 70, + MX25_PAD_CONTRAST = 71, + MX25_PAD_PWM = 72, + MX25_PAD_CSI_D2 = 73, + MX25_PAD_CSI_D3 = 74, + MX25_PAD_CSI_D4 = 75, + MX25_PAD_CSI_D5 = 76, + MX25_PAD_CSI_D6 = 77, + MX25_PAD_CSI_D7 = 78, + MX25_PAD_CSI_D8 = 79, + MX25_PAD_CSI_D9 = 80, + MX25_PAD_CSI_MCLK = 81, + MX25_PAD_CSI_VSYNC = 82, + MX25_PAD_CSI_HSYNC = 83, + MX25_PAD_CSI_PIXCLK = 84, + MX25_PAD_I2C1_CLK = 85, + MX25_PAD_I2C1_DAT = 86, + MX25_PAD_CSPI1_MOSI = 87, + MX25_PAD_CSPI1_MISO = 88, + MX25_PAD_CSPI1_SS0 = 89, + MX25_PAD_CSPI1_SS1 = 90, + MX25_PAD_CSPI1_SCLK = 91, + MX25_PAD_CSPI1_RDY = 92, + MX25_PAD_UART1_RXD = 93, + MX25_PAD_UART1_TXD = 94, + MX25_PAD_UART1_RTS = 95, + MX25_PAD_UART1_CTS = 96, + MX25_PAD_UART2_RXD = 97, + MX25_PAD_UART2_TXD = 98, + MX25_PAD_UART2_RTS = 99, + MX25_PAD_UART2_CTS = 100, + MX25_PAD_SD1_CMD = 101, + MX25_PAD_SD1_CLK = 102, + MX25_PAD_SD1_DATA0 = 103, + MX25_PAD_SD1_DATA1 = 104, + MX25_PAD_SD1_DATA2 = 105, + MX25_PAD_SD1_DATA3 = 106, + MX25_PAD_KPP_ROW0 = 107, + MX25_PAD_KPP_ROW1 = 108, + MX25_PAD_KPP_ROW2 = 109, + MX25_PAD_KPP_ROW3 = 110, + MX25_PAD_KPP_COL0 = 111, + MX25_PAD_KPP_COL1 = 112, + MX25_PAD_KPP_COL2 = 113, + MX25_PAD_KPP_COL3 = 114, + MX25_PAD_FEC_MDC = 115, + MX25_PAD_FEC_MDIO = 116, + MX25_PAD_FEC_TDATA0 = 117, + MX25_PAD_FEC_TDATA1 = 118, + MX25_PAD_FEC_TX_EN = 119, + MX25_PAD_FEC_RDATA0 = 120, + MX25_PAD_FEC_RDATA1 = 121, + MX25_PAD_FEC_RX_DV = 122, + MX25_PAD_FEC_TX_CLK = 123, + MX25_PAD_RTCK = 124, + MX25_PAD_DE_B = 125, + MX25_PAD_GPIO_A = 126, + MX25_PAD_GPIO_B = 127, + MX25_PAD_GPIO_C = 128, + MX25_PAD_GPIO_D = 129, + MX25_PAD_GPIO_E = 130, + MX25_PAD_GPIO_F = 131, + MX25_PAD_EXT_ARMCLK = 132, + MX25_PAD_UPLL_BYPCLK = 133, + MX25_PAD_VSTBY_REQ = 134, + MX25_PAD_VSTBY_ACK = 135, + MX25_PAD_POWER_FAIL = 136, + MX25_PAD_CLKO = 137, + MX25_PAD_BOOT_MODE0 = 138, + MX25_PAD_BOOT_MODE1 = 139, +}; + +/* Pad names for the pinmux subsystem */ +static const struct pinctrl_pin_desc imx25_pinctrl_pads[] = { + IMX_PINCTRL_PIN(MX25_PAD_RESERVE0), + IMX_PINCTRL_PIN(MX25_PAD_RESERVE1), + IMX_PINCTRL_PIN(MX25_PAD_A10), + IMX_PINCTRL_PIN(MX25_PAD_A13), + IMX_PINCTRL_PIN(MX25_PAD_A14), + IMX_PINCTRL_PIN(MX25_PAD_A15), + IMX_PINCTRL_PIN(MX25_PAD_A16), + IMX_PINCTRL_PIN(MX25_PAD_A17), + IMX_PINCTRL_PIN(MX25_PAD_A18), + IMX_PINCTRL_PIN(MX25_PAD_A19), + IMX_PINCTRL_PIN(MX25_PAD_A20), + IMX_PINCTRL_PIN(MX25_PAD_A21), + IMX_PINCTRL_PIN(MX25_PAD_A22), + IMX_PINCTRL_PIN(MX25_PAD_A23), + IMX_PINCTRL_PIN(MX25_PAD_A24), + IMX_PINCTRL_PIN(MX25_PAD_A25), + IMX_PINCTRL_PIN(MX25_PAD_EB0), + IMX_PINCTRL_PIN(MX25_PAD_EB1), + IMX_PINCTRL_PIN(MX25_PAD_OE), + IMX_PINCTRL_PIN(MX25_PAD_CS0), + IMX_PINCTRL_PIN(MX25_PAD_CS1), + IMX_PINCTRL_PIN(MX25_PAD_CS4), + IMX_PINCTRL_PIN(MX25_PAD_CS5), + IMX_PINCTRL_PIN(MX25_PAD_NF_CE0), + IMX_PINCTRL_PIN(MX25_PAD_ECB), + IMX_PINCTRL_PIN(MX25_PAD_LBA), + IMX_PINCTRL_PIN(MX25_PAD_BCLK), + IMX_PINCTRL_PIN(MX25_PAD_RW), + IMX_PINCTRL_PIN(MX25_PAD_NFWE_B), + IMX_PINCTRL_PIN(MX25_PAD_NFRE_B), + IMX_PINCTRL_PIN(MX25_PAD_NFALE), + IMX_PINCTRL_PIN(MX25_PAD_NFCLE), + IMX_PINCTRL_PIN(MX25_PAD_NFWP_B), + IMX_PINCTRL_PIN(MX25_PAD_NFRB), + IMX_PINCTRL_PIN(MX25_PAD_D15), + IMX_PINCTRL_PIN(MX25_PAD_D14), + IMX_PINCTRL_PIN(MX25_PAD_D13), + IMX_PINCTRL_PIN(MX25_PAD_D12), + IMX_PINCTRL_PIN(MX25_PAD_D11), + IMX_PINCTRL_PIN(MX25_PAD_D10), + IMX_PINCTRL_PIN(MX25_PAD_D9), + IMX_PINCTRL_PIN(MX25_PAD_D8), + IMX_PINCTRL_PIN(MX25_PAD_D7), + IMX_PINCTRL_PIN(MX25_PAD_D6), + IMX_PINCTRL_PIN(MX25_PAD_D5), + IMX_PINCTRL_PIN(MX25_PAD_D4), + IMX_PINCTRL_PIN(MX25_PAD_D3), + IMX_PINCTRL_PIN(MX25_PAD_D2), + IMX_PINCTRL_PIN(MX25_PAD_D1), + IMX_PINCTRL_PIN(MX25_PAD_D0), + IMX_PINCTRL_PIN(MX25_PAD_LD0), + IMX_PINCTRL_PIN(MX25_PAD_LD1), + IMX_PINCTRL_PIN(MX25_PAD_LD2), + IMX_PINCTRL_PIN(MX25_PAD_LD3), + IMX_PINCTRL_PIN(MX25_PAD_LD4), + IMX_PINCTRL_PIN(MX25_PAD_LD5), + IMX_PINCTRL_PIN(MX25_PAD_LD6), + IMX_PINCTRL_PIN(MX25_PAD_LD7), + IMX_PINCTRL_PIN(MX25_PAD_LD8), + IMX_PINCTRL_PIN(MX25_PAD_LD9), + IMX_PINCTRL_PIN(MX25_PAD_LD10), + IMX_PINCTRL_PIN(MX25_PAD_LD11), + IMX_PINCTRL_PIN(MX25_PAD_LD12), + IMX_PINCTRL_PIN(MX25_PAD_LD13), + IMX_PINCTRL_PIN(MX25_PAD_LD14), + IMX_PINCTRL_PIN(MX25_PAD_LD15), + IMX_PINCTRL_PIN(MX25_PAD_HSYNC), + IMX_PINCTRL_PIN(MX25_PAD_VSYNC), + IMX_PINCTRL_PIN(MX25_PAD_LSCLK), + IMX_PINCTRL_PIN(MX25_PAD_OE_ACD), + IMX_PINCTRL_PIN(MX25_PAD_CONTRAST), + IMX_PINCTRL_PIN(MX25_PAD_PWM), + IMX_PINCTRL_PIN(MX25_PAD_CSI_D2), + IMX_PINCTRL_PIN(MX25_PAD_CSI_D3), + IMX_PINCTRL_PIN(MX25_PAD_CSI_D4), + IMX_PINCTRL_PIN(MX25_PAD_CSI_D5), + IMX_PINCTRL_PIN(MX25_PAD_CSI_D6), + IMX_PINCTRL_PIN(MX25_PAD_CSI_D7), + IMX_PINCTRL_PIN(MX25_PAD_CSI_D8), + IMX_PINCTRL_PIN(MX25_PAD_CSI_D9), + IMX_PINCTRL_PIN(MX25_PAD_CSI_MCLK), + IMX_PINCTRL_PIN(MX25_PAD_CSI_VSYNC), + IMX_PINCTRL_PIN(MX25_PAD_CSI_HSYNC), + IMX_PINCTRL_PIN(MX25_PAD_CSI_PIXCLK), + IMX_PINCTRL_PIN(MX25_PAD_I2C1_CLK), + IMX_PINCTRL_PIN(MX25_PAD_I2C1_DAT), + IMX_PINCTRL_PIN(MX25_PAD_CSPI1_MOSI), + IMX_PINCTRL_PIN(MX25_PAD_CSPI1_MISO), + IMX_PINCTRL_PIN(MX25_PAD_CSPI1_SS0), + IMX_PINCTRL_PIN(MX25_PAD_CSPI1_SS1), + IMX_PINCTRL_PIN(MX25_PAD_CSPI1_SCLK), + IMX_PINCTRL_PIN(MX25_PAD_CSPI1_RDY), + IMX_PINCTRL_PIN(MX25_PAD_UART1_RXD), + IMX_PINCTRL_PIN(MX25_PAD_UART1_TXD), + IMX_PINCTRL_PIN(MX25_PAD_UART1_RTS), + IMX_PINCTRL_PIN(MX25_PAD_UART1_CTS), + IMX_PINCTRL_PIN(MX25_PAD_UART2_RXD), + IMX_PINCTRL_PIN(MX25_PAD_UART2_TXD), + IMX_PINCTRL_PIN(MX25_PAD_UART2_RTS), + IMX_PINCTRL_PIN(MX25_PAD_UART2_CTS), + IMX_PINCTRL_PIN(MX25_PAD_SD1_CMD), + IMX_PINCTRL_PIN(MX25_PAD_SD1_CLK), + IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA0), + IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA1), + IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA2), + IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA3), + IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW0), + IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW1), + IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW2), + IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW3), + IMX_PINCTRL_PIN(MX25_PAD_KPP_COL0), + IMX_PINCTRL_PIN(MX25_PAD_KPP_COL1), + IMX_PINCTRL_PIN(MX25_PAD_KPP_COL2), + IMX_PINCTRL_PIN(MX25_PAD_KPP_COL3), + IMX_PINCTRL_PIN(MX25_PAD_FEC_MDC), + IMX_PINCTRL_PIN(MX25_PAD_FEC_MDIO), + IMX_PINCTRL_PIN(MX25_PAD_FEC_TDATA0), + IMX_PINCTRL_PIN(MX25_PAD_FEC_TDATA1), + IMX_PINCTRL_PIN(MX25_PAD_FEC_TX_EN), + IMX_PINCTRL_PIN(MX25_PAD_FEC_RDATA0), + IMX_PINCTRL_PIN(MX25_PAD_FEC_RDATA1), + IMX_PINCTRL_PIN(MX25_PAD_FEC_RX_DV), + IMX_PINCTRL_PIN(MX25_PAD_FEC_TX_CLK), + IMX_PINCTRL_PIN(MX25_PAD_RTCK), + IMX_PINCTRL_PIN(MX25_PAD_DE_B), + IMX_PINCTRL_PIN(MX25_PAD_GPIO_A), + IMX_PINCTRL_PIN(MX25_PAD_GPIO_B), + IMX_PINCTRL_PIN(MX25_PAD_GPIO_C), + IMX_PINCTRL_PIN(MX25_PAD_GPIO_D), + IMX_PINCTRL_PIN(MX25_PAD_GPIO_E), + IMX_PINCTRL_PIN(MX25_PAD_GPIO_F), + IMX_PINCTRL_PIN(MX25_PAD_EXT_ARMCLK), + IMX_PINCTRL_PIN(MX25_PAD_UPLL_BYPCLK), + IMX_PINCTRL_PIN(MX25_PAD_VSTBY_REQ), + IMX_PINCTRL_PIN(MX25_PAD_VSTBY_ACK), + IMX_PINCTRL_PIN(MX25_PAD_POWER_FAIL), + IMX_PINCTRL_PIN(MX25_PAD_CLKO), + IMX_PINCTRL_PIN(MX25_PAD_BOOT_MODE0), + IMX_PINCTRL_PIN(MX25_PAD_BOOT_MODE1), +}; + +static struct imx_pinctrl_soc_info imx25_pinctrl_info = { + .pins = imx25_pinctrl_pads, + .npins = ARRAY_SIZE(imx25_pinctrl_pads), +}; + +static struct of_device_id imx25_pinctrl_of_match[] = { + { .compatible = "fsl,imx25-iomuxc", }, + { /* sentinel */ } +}; + +static int imx25_pinctrl_probe(struct platform_device *pdev) +{ + return imx_pinctrl_probe(pdev, &imx25_pinctrl_info); +} + +static struct platform_driver imx25_pinctrl_driver = { + .driver = { + .name = "imx25-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(imx25_pinctrl_of_match), + }, + .probe = imx25_pinctrl_probe, + .remove = imx_pinctrl_remove, +}; + +static int __init imx25_pinctrl_init(void) +{ + return platform_driver_register(&imx25_pinctrl_driver); +} +arch_initcall(imx25_pinctrl_init); + +static void __exit imx25_pinctrl_exit(void) +{ + platform_driver_unregister(&imx25_pinctrl_driver); +} +module_exit(imx25_pinctrl_exit); +MODULE_AUTHOR("Denis Carikli <denis@eukrea.com>"); +MODULE_DESCRIPTION("Freescale IMX25 pinctrl driver"); +MODULE_LICENSE("GPL v2"); -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv5][ 5/9] pinctrl: pinctrl-imx: add imx25 pinctrl driver 2013-10-23 8:29 ` [PATCHv5][ 5/9] pinctrl: pinctrl-imx: add imx25 pinctrl driver Denis Carikli @ 2013-10-24 6:36 ` Shawn Guo 0 siblings, 0 replies; 14+ messages in thread From: Shawn Guo @ 2013-10-24 6:36 UTC (permalink / raw) To: linux-arm-kernel On Wed, Oct 23, 2013 at 10:29:30AM +0200, Denis Carikli wrote: > This is mostly cut and paste from the imx35 pinctrl driver. > The data was generated using sed and awk on > arch/arm/plat-mxc/include/mach/iomux-mx25.h. > > Cc: Rob Herring <rob.herring@calxeda.com> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Stephen Warren <swarren@wwwdotorg.org> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Cc: devicetree at vger.kernel.org > Cc: Sascha Hauer <kernel@pengutronix.de> > Cc: linux-arm-kernel at lists.infradead.org > Cc: Russell King <linux@arm.linux.org.uk> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Eric B?nard <eric@eukrea.com> > > Signed-off-by: Denis Carikli <denis@eukrea.com> Looks fine to me. I need LinusW's ACK to take it through IMX tree. Shawn > --- > .../bindings/pinctrl/fsl,imx25-pinctrl.txt | 33 ++ > arch/arm/boot/dts/imx25-pinfunc.h | 513 ++++++++++++++++++++ > arch/arm/boot/dts/imx25.dtsi | 1 + > arch/arm/mach-imx/Kconfig | 2 + > drivers/pinctrl/Kconfig | 8 + > drivers/pinctrl/Makefile | 1 + > drivers/pinctrl/pinctrl-imx25.c | 351 ++++++++++++++ > 7 files changed, 909 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt > create mode 100644 arch/arm/boot/dts/imx25-pinfunc.h > create mode 100644 drivers/pinctrl/pinctrl-imx25.c > > diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt > new file mode 100644 > index 0000000..64906ca > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt > @@ -0,0 +1,33 @@ > +* Freescale IMX25 IOMUX Controller > + > +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part > +and usage. > + > +Required properties: > +- compatible: "fsl,imx25-iomuxc" > +- fsl,pins: two integers array, represents a group of pins mux and config > + setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a > + pin working on a specific function, CONFIG is the pad setting value like > + pull-up for this pin. Please refer to imx25 datasheet for the valid pad > + config settings. > + > +CONFIG bits definition: > +PAD_CTL_DRIVE_VOLAGAGE_18 (1 << 13) > +PAD_CTL_DRIVE_VOLAGAGE_33 (0 << 13) > +PAD_CTL_HYS (1 << 8) > +PAD_CTL_PKE (1 << 7) > +PAD_CTL_PUE (1 << 6) > +PAD_CTL_PUS_100K_DOWN (0 << 4) > +PAD_CTL_PUS_47K_UP (1 << 4) > +PAD_CTL_PUS_100K_UP (2 << 4) > +PAD_CTL_PUS_22K_UP (3 << 4) > +PAD_CTL_ODE_CMOS (0 << 3) > +PAD_CTL_ODE_OPENDRAIN (1 << 3) > +PAD_CTL_DSE_NOMINAL (0 << 1) > +PAD_CTL_DSE_HIGH (1 << 1) > +PAD_CTL_DSE_MAX (2 << 1) > +PAD_CTL_SRE_FAST (1 << 0) > +PAD_CTL_SRE_SLOW (0 << 0) > + > +Refer to imx25-pinfunc.h in device tree source folder for all available > +imx25 PIN_FUNC_ID. > diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h > new file mode 100644 > index 0000000..0a9f9a2 > --- /dev/null > +++ b/arch/arm/boot/dts/imx25-pinfunc.h > @@ -0,0 +1,513 @@ > +/* > + * Copyright 2013 Eukr?a Electromatique <denis@eukrea.com> > + * Based on imx35-pinfunc.h in the same directory Which is: > + * Copyright 2013 Freescale Semiconductor, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + */ > + > +#ifndef __DTS_IMX25_PINFUNC_H > +#define __DTS_IMX25_PINFUNC_H > + > +/* > + * The pin function ID is a tuple of > + * <mux_reg conf_reg input_reg mux_mode input_val> > + */ > + > +#define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000 > +#define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000 > + > +#define MX25_PAD_A13__A13 0x00c 0x22C 0x000 0x00 0x000 > +#define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000 > + > +#define MX25_PAD_A14__A14 0x010 0x230 0x000 0x10 0x000 > +#define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x15 0x000 > + > +#define MX25_PAD_A15__A15 0x014 0x234 0x000 0x10 0x000 > +#define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x15 0x000 > + > +#define MX25_PAD_A16__A16 0x018 0x000 0x000 0x10 0x000 > +#define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x15 0x000 > + > +#define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x10 0x000 > +#define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x15 0x000 > + > +#define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x10 0x000 > +#define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x15 0x000 > +#define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x17 0x000 > + > +#define MX25_PAD_A19__A19 0x024 0x240 0x000 0x10 0x000 > +#define MX25_PAD_A19__FEC_RX_ER 0x024 0x240 0x518 0x17 0x000 > +#define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x15 0x000 > + > +#define MX25_PAD_A20__A20 0x028 0x244 0x000 0x10 0x000 > +#define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x15 0x000 > +#define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x17 0x000 > + > +#define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x10 0x000 > +#define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x15 0x000 > +#define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x17 0x000 > + > +#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x10 0x000 > +#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x15 0x000 > + > +#define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x10 0x000 > +#define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x15 0x000 > + > +#define MX25_PAD_A24__A24 0x038 0x250 0x000 0x10 0x000 > +#define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x15 0x000 > +#define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x17 0x000 > + > +#define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x10 0x000 > +#define MX25_PAD_A25__GPIO_2_11 0x03c 0x254 0x000 0x15 0x000 > +#define MX25_PAD_A25__FEC_CRS 0x03c 0x254 0x508 0x17 0x000 > + > +#define MX25_PAD_EB0__EB0 0x040 0x258 0x000 0x10 0x000 > +#define MX25_PAD_EB0__AUD4_TXD 0x040 0x258 0x464 0x14 0x000 > +#define MX25_PAD_EB0__GPIO_2_12 0x040 0x258 0x000 0x15 0x000 > + > +#define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x10 0x000 > +#define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x14 0x000 > +#define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x15 0x000 > + > +#define MX25_PAD_OE__OE 0x048 0x260 0x000 0x10 0x000 > +#define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x14 0x000 > +#define MX25_PAD_OE__GPIO_2_14 0x048 0x260 0x000 0x15 0x000 > + > +#define MX25_PAD_CS0__CS0 0x04c 0x000 0x000 0x00 0x000 > +#define MX25_PAD_CS0__GPIO_4_2 0x04c 0x000 0x000 0x05 0x000 > + > +#define MX25_PAD_CS1__CS1 0x050 0x000 0x000 0x00 0x000 > +#define MX25_PAD_CS1__NF_CE3 0x050 0x000 0x000 0x01 0x000 > +#define MX25_PAD_CS1__GPIO_4_3 0x050 0x000 0x000 0x05 0x000 > + > +#define MX25_PAD_CS4__CS4 0x054 0x264 0x000 0x10 0x000 > +#define MX25_PAD_CS4__NF_CE1 0x054 0x264 0x000 0x01 0x000 > +#define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x13 0x000 > +#define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x15 0x000 > + > +#define MX25_PAD_CS5__CS5 0x058 0x268 0x000 0x10 0x000 > +#define MX25_PAD_CS5__NF_CE2 0x058 0x268 0x000 0x01 0x000 > +#define MX25_PAD_CS5__UART5_RTS 0x058 0x268 0x574 0x13 0x000 > +#define MX25_PAD_CS5__GPIO_3_21 0x058 0x268 0x000 0x15 0x000 > + > +#define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x10 0x000 > +#define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x15 0x000 > + > +#define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x10 0x000 > +#define MX25_PAD_ECB__UART5_TXD_MUX 0x060 0x270 0x000 0x13 0x000 > +#define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x15 0x000 > + > +#define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x10 0x000 > +#define MX25_PAD_LBA__UART5_RXD_MUX 0x064 0x274 0x578 0x13 0x000 > +#define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x15 0x000 > + > +#define MX25_PAD_BCLK__BCLK 0x068 0x000 0x000 0x00 0x000 > +#define MX25_PAD_BCLK__GPIO_4_4 0x068 0x000 0x000 0x05 0x000 > + > +#define MX25_PAD_RW__RW 0x06c 0x278 0x000 0x10 0x000 > +#define MX25_PAD_RW__AUD4_TXFS 0x06c 0x278 0x474 0x14 0x000 > +#define MX25_PAD_RW__GPIO_3_25 0x06c 0x278 0x000 0x15 0x000 > + > +#define MX25_PAD_NFWE_B__NFWE_B 0x070 0x000 0x000 0x10 0x000 > +#define MX25_PAD_NFWE_B__GPIO_3_26 0x070 0x000 0x000 0x15 0x000 > + > +#define MX25_PAD_NFRE_B__NFRE_B 0x074 0x000 0x000 0x10 0x000 > +#define MX25_PAD_NFRE_B__GPIO_3_27 0x074 0x000 0x000 0x15 0x000 > + > +#define MX25_PAD_NFALE__NFALE 0x078 0x000 0x000 0x10 0x000 > +#define MX25_PAD_NFALE__GPIO_3_28 0x078 0x000 0x000 0x15 0x000 > + > +#define MX25_PAD_NFCLE__NFCLE 0x07c 0x000 0x000 0x10 0x000 > +#define MX25_PAD_NFCLE__GPIO_3_29 0x07c 0x000 0x000 0x15 0x000 > + > +#define MX25_PAD_NFWP_B__NFWP_B 0x080 0x000 0x000 0x10 0x000 > +#define MX25_PAD_NFWP_B__GPIO_3_30 0x080 0x000 0x000 0x15 0x000 > + > +#define MX25_PAD_NFRB__NFRB 0x084 0x27c 0x000 0x10 0x000 > +#define MX25_PAD_NFRB__GPIO_3_31 0x084 0x27c 0x000 0x15 0x000 > + > +#define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000 > +#define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000 > +#define MX25_PAD_D15__GPIO_4_5 0x088 0x280 0x000 0x05 0x000 > + > +#define MX25_PAD_D14__D14 0x08c 0x284 0x000 0x00 0x000 > +#define MX25_PAD_D14__LD17 0x08c 0x284 0x000 0x01 0x000 > +#define MX25_PAD_D14__GPIO_4_6 0x08c 0x284 0x000 0x05 0x000 > + > +#define MX25_PAD_D13__D13 0x090 0x288 0x000 0x00 0x000 > +#define MX25_PAD_D13__LD18 0x090 0x288 0x000 0x01 0x000 > +#define MX25_PAD_D13__GPIO_4_7 0x090 0x288 0x000 0x05 0x000 > + > +#define MX25_PAD_D12__D12 0x094 0x28c 0x000 0x00 0x000 > +#define MX25_PAD_D12__GPIO_4_8 0x094 0x28c 0x000 0x05 0x000 > + > +#define MX25_PAD_D11__D11 0x098 0x290 0x000 0x00 0x000 > +#define MX25_PAD_D11__GPIO_4_9 0x098 0x290 0x000 0x05 0x000 > + > +#define MX25_PAD_D10__D10 0x09c 0x294 0x000 0x00 0x000 > +#define MX25_PAD_D10__GPIO_4_10 0x09c 0x294 0x000 0x05 0x000 > +#define MX25_PAD_D10__USBOTG_OC 0x09c 0x294 0x57c 0x06 0x000 > + > +#define MX25_PAD_D9__D9 0x0a0 0x298 0x000 0x00 0x000 > +#define MX25_PAD_D9__GPIO_4_11 0x0a0 0x298 0x000 0x05 0x000 > +#define MX25_PAD_D9__USBH2_PWR 0x0a0 0x298 0x000 0x06 0x000 > + > +#define MX25_PAD_D8__D8 0x0a4 0x29c 0x000 0x00 0x000 > +#define MX25_PAD_D8__GPIO_4_12 0x0a4 0x29c 0x000 0x05 0x000 > +#define MX25_PAD_D8__USBH2_OC 0x0a4 0x29c 0x580 0x06 0x000 > + > +#define MX25_PAD_D7__D7 0x0a8 0x2a0 0x000 0x00 0x000 > +#define MX25_PAD_D7__GPIO_4_13 0x0a8 0x2a0 0x000 0x05 0x000 > + > +#define MX25_PAD_D6__D6 0x0ac 0x2a4 0x000 0x00 0x000 > +#define MX25_PAD_D6__GPIO_4_14 0x0ac 0x2a4 0x000 0x05 0x000 > + > +#define MX25_PAD_D5__D5 0x0b0 0x2a8 0x000 0x00 0x000 > +#define MX25_PAD_D5__GPIO_4_15 0x0b0 0x2a8 0x000 0x05 0x000 > + > +#define MX25_PAD_D4__D4 0x0b4 0x2ac 0x000 0x00 0x000 > +#define MX25_PAD_D4__GPIO_4_16 0x0b4 0x2ac 0x000 0x05 0x000 > + > +#define MX25_PAD_D3__D3 0x0b8 0x2b0 0x000 0x00 0x000 > +#define MX25_PAD_D3__GPIO_4_17 0x0b8 0x2b0 0x000 0x05 0x000 > + > +#define MX25_PAD_D2__D2 0x0bc 0x2b4 0x000 0x00 0x000 > +#define MX25_PAD_D2__GPIO_4_18 0x0bc 0x2b4 0x000 0x05 0x000 > + > +#define MX25_PAD_D1__D1 0x0c0 0x2b8 0x000 0x00 0x000 > +#define MX25_PAD_D1__GPIO_4_19 0x0c0 0x2b8 0x000 0x05 0x000 > + > +#define MX25_PAD_D0__D0 0x0c4 0x2bc 0x000 0x00 0x000 > +#define MX25_PAD_D0__GPIO_4_20 0x0c4 0x2bc 0x000 0x05 0x000 > + > +#define MX25_PAD_LD0__LD0 0x0c8 0x2c0 0x000 0x10 0x000 > +#define MX25_PAD_LD0__CSI_D0 0x0c8 0x2c0 0x488 0x12 0x000 > +#define MX25_PAD_LD0__GPIO_2_15 0x0c8 0x2c0 0x000 0x15 0x000 > + > +#define MX25_PAD_LD1__LD1 0x0cc 0x2c4 0x000 0x10 0x000 > +#define MX25_PAD_LD1__CSI_D1 0x0cc 0x2c4 0x48c 0x12 0x000 > +#define MX25_PAD_LD1__GPIO_2_16 0x0cc 0x2c4 0x000 0x15 0x000 > + > +#define MX25_PAD_LD2__LD2 0x0d0 0x2c8 0x000 0x10 0x000 > +#define MX25_PAD_LD2__GPIO_2_17 0x0d0 0x2c8 0x000 0x15 0x000 > + > +#define MX25_PAD_LD3__LD3 0x0d4 0x2cc 0x000 0x10 0x000 > +#define MX25_PAD_LD3__GPIO_2_18 0x0d4 0x2cc 0x000 0x15 0x000 > + > +#define MX25_PAD_LD4__LD4 0x0d8 0x2d0 0x000 0x10 0x000 > +#define MX25_PAD_LD4__GPIO_2_19 0x0d8 0x2d0 0x000 0x15 0x000 > + > +#define MX25_PAD_LD5__LD5 0x0dc 0x2d4 0x000 0x10 0x000 > +#define MX25_PAD_LD5__GPIO_1_19 0x0dc 0x2d4 0x000 0x15 0x000 > + > +#define MX25_PAD_LD6__LD6 0x0e0 0x2d8 0x000 0x10 0x000 > +#define MX25_PAD_LD6__GPIO_1_20 0x0e0 0x2d8 0x000 0x15 0x000 > + > +#define MX25_PAD_LD7__LD7 0x0e4 0x2dc 0x000 0x10 0x000 > +#define MX25_PAD_LD7__GPIO_1_21 0x0e4 0x2dc 0x000 0x15 0x000 > + > +#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000 > +#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000 > + > +#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000 > +#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001 > + > +#define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x10 0x000 > +#define MX25_PAD_LD10__FEC_RX_ER 0x0f0 0x2e8 0x518 0x15 0x001 > + > +#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000 > +#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001 > + > +#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x10 0x000 > +#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x15 0x001 > + > +#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x10 0x000 > +#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x15 0x000 > + > +#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x10 0x000 > +#define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x15 0x000 > + > +#define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x10 0x000 > +#define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x15 0x001 > + > +#define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x10 0x000 > +#define MX25_PAD_HSYNC__GPIO_1_22 0x108 0x300 0x000 0x15 0x000 > + > +#define MX25_PAD_VSYNC__VSYNC 0x10c 0x304 0x000 0x10 0x000 > +#define MX25_PAD_VSYNC__GPIO_1_23 0x10c 0x304 0x000 0x15 0x000 > + > +#define MX25_PAD_LSCLK__LSCLK 0x110 0x308 0x000 0x10 0x000 > +#define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x15 0x000 > + > +#define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x10 0x000 > +#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000 > + > +#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000 > +#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x14 0x000 > +#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x15 0x001 > + > +#define MX25_PAD_PWM__PWM 0x11c 0x314 0x000 0x10 0x000 > +#define MX25_PAD_PWM__GPIO_1_26 0x11c 0x314 0x000 0x15 0x000 > +#define MX25_PAD_PWM__USBH2_OC 0x11c 0x314 0x580 0x16 0x001 > + > +#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000 > +#define MX25_PAD_CSI_D2__UART5_RXD_MUX 0x120 0x318 0x578 0x11 0x001 > +#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000 > +#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000 > + > +#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000 > +#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000 > +#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001 > + > +#define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x10 0x000 > +#define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x11 0x001 > +#define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x15 0x000 > +#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000 > + > +#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000 > +#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000 > +#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000 > + > +#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000 > +#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000 > + > +#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000 > +#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000 > + > +#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000 > +#define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000 > + > +#define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000 > +#define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000 > + > +#define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000 > +#define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000 > + > +#define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000 > +#define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000 > + > +#define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000 > +#define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000 > + > +#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000 > +#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000 > + > +#define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x10 0x000 > +#define MX25_PAD_I2C1_CLK__GPIO_1_12 0x150 0x348 0x000 0x15 0x000 > + > +#define MX25_PAD_I2C1_DAT__I2C1_DAT 0x154 0x34c 0x000 0x10 0x000 > +#define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x15 0x000 > + > +#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x10 0x000 > +#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x15 0x000 > + > +#define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x10 0x000 > +#define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x15 0x000 > + > +#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x10 0x000 > +#define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x15 0x000 > + > +#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 0x164 0x35c 0x000 0x10 0x000 > +#define MX25_PAD_CSPI1_SS1__GPIO_1_17 0x164 0x35c 0x000 0x15 0x000 > + > +#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x10 0x000 > +#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x15 0x000 > + > +#define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x10 0x000 > +#define MX25_PAD_CSPI1_RDY__GPIO_2_22 0x16c 0x364 0x000 0x15 0x000 > + > +#define MX25_PAD_UART1_RXD__UART1_RXD 0x170 0x368 0x000 0x10 0x000 > +#define MX25_PAD_UART1_RXD__GPIO_4_22 0x170 0x368 0x000 0x15 0x000 > + > +#define MX25_PAD_UART1_TXD__UART1_TXD 0x174 0x36c 0x000 0x10 0x000 > +#define MX25_PAD_UART1_TXD__GPIO_4_23 0x174 0x36c 0x000 0x15 0x000 > + > +#define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x10 0x000 > +#define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x11 0x001 > +#define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x15 0x000 > + > +#define MX25_PAD_UART1_CTS__UART1_CTS 0x17c 0x374 0x000 0x10 0x000 > +#define MX25_PAD_UART1_CTS__CSI_D1 0x17c 0x374 0x48c 0x11 0x001 > +#define MX25_PAD_UART1_CTS__GPIO_4_25 0x17c 0x374 0x000 0x15 0x000 > + > +#define MX25_PAD_UART2_RXD__UART2_RXD 0x180 0x378 0x000 0x10 0x000 > +#define MX25_PAD_UART2_RXD__GPIO_4_26 0x180 0x378 0x000 0x15 0x000 > + > +#define MX25_PAD_UART2_TXD__UART2_TXD 0x184 0x37c 0x000 0x10 0x000 > +#define MX25_PAD_UART2_TXD__GPIO_4_27 0x184 0x37c 0x000 0x15 0x000 > + > +#define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x10 0x000 > +#define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x12 0x002 > +#define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000 > + > +#define MX25_PAD_UART2_CTS__FEC_RX_ER 0x18c 0x384 0x518 0x12 0x002 > +#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x10 0x000 > +#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000 > + > +#define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000 > +#define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x12 0x002 > +#define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x15 0x000 > + > +#define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x10 0x000 > +#define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x12 0x002 > +#define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x15 0x000 > + > +#define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x10 0x000 > +#define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x15 0x000 > + > +#define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x10 0x000 > +#define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x13 0x000 > +#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x15 0x000 > + > +#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x10 0x000 > +#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x15 0x002 > +#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x15 0x000 > + > +#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x10 0x000 > +#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x10 0x002 > +#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000 > + > +#define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x10 0x000 > +#define MX25_PAD_KPP_ROW0__GPIO_2_29 0x1a8 0x3a0 0x000 0x15 0x000 > + > +#define MX25_PAD_KPP_ROW1__KPP_ROW1 0x1ac 0x3a4 0x000 0x10 0x000 > +#define MX25_PAD_KPP_ROW1__GPIO_2_30 0x1ac 0x3a4 0x000 0x15 0x000 > + > +#define MX25_PAD_KPP_ROW2__KPP_ROW2 0x1b0 0x3a8 0x000 0x10 0x000 > +#define MX25_PAD_KPP_ROW2__CSI_D0 0x1b0 0x3a8 0x488 0x13 0x002 > +#define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x15 0x000 > + > +#define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x10 0x000 > +#define MX25_PAD_KPP_ROW3__CSI_LD1 0x1b4 0x3ac 0x48c 0x13 0x002 > +#define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x15 0x000 > + > +#define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x10 0x000 > +#define MX25_PAD_KPP_COL0__UART4_RXD_MUX 0x1b8 0x3b0 0x570 0x11 0x001 > +#define MX25_PAD_KPP_COL0__AUD5_TXD 0x1b8 0x3b0 0x000 0x12 0x000 > +#define MX25_PAD_KPP_COL0__GPIO_3_1 0x1b8 0x3b0 0x000 0x15 0x000 > + > +#define MX25_PAD_KPP_COL1__KPP_COL1 0x1bc 0x3b4 0x000 0x10 0x000 > +#define MX25_PAD_KPP_COL1__UART4_TXD_MUX 0x1bc 0x3b4 0x000 0x11 0x000 > +#define MX25_PAD_KPP_COL1__AUD5_RXD 0x1bc 0x3b4 0x000 0x12 0x000 > +#define MX25_PAD_KPP_COL1__GPIO_3_2 0x1bc 0x3b4 0x000 0x15 0x000 > + > +#define MX25_PAD_KPP_COL2__KPP_COL2 0x1c0 0x3b8 0x000 0x10 0x000 > +#define MX25_PAD_KPP_COL2__UART4_RTS 0x1c0 0x3b8 0x000 0x11 0x000 > +#define MX25_PAD_KPP_COL2__AUD5_TXC 0x1c0 0x3b8 0x000 0x12 0x000 > +#define MX25_PAD_KPP_COL2__GPIO_3_3 0x1c0 0x3b8 0x000 0x15 0x000 > + > +#define MX25_PAD_KPP_COL3__KPP_COL3 0x1c4 0x3bc 0x000 0x10 0x000 > +#define MX25_PAD_KPP_COL3__UART4_CTS 0x1c4 0x3bc 0x000 0x11 0x000 > +#define MX25_PAD_KPP_COL3__AUD5_TXFS 0x1c4 0x3bc 0x000 0x12 0x000 > +#define MX25_PAD_KPP_COL3__GPIO_3_4 0x1c4 0x3bc 0x000 0x15 0x000 > + > +#define MX25_PAD_FEC_MDC__FEC_MDC 0x1c8 0x3c0 0x000 0x10 0x000 > +#define MX25_PAD_FEC_MDC__AUD4_TXD 0x1c8 0x3c0 0x464 0x12 0x001 > +#define MX25_PAD_FEC_MDC__GPIO_3_5 0x1c8 0x3c0 0x000 0x15 0x000 > + > +#define MX25_PAD_FEC_MDIO__FEC_MDIO 0x1cc 0x3c4 0x000 0x10 0x000 > +#define MX25_PAD_FEC_MDIO__AUD4_RXD 0x1cc 0x3c4 0x460 0x12 0x001 > +#define MX25_PAD_FEC_MDIO__GPIO_3_6 0x1cc 0x3c4 0x000 0x15 0x000 > + > +#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x1d0 0x3c8 0x000 0x10 0x000 > +#define MX25_PAD_FEC_TDATA0__GPIO_3_7 0x1d0 0x3c8 0x000 0x15 0x000 > + > +#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x1d4 0x3cc 0x000 0x10 0x000 > +#define MX25_PAD_FEC_TDATA1__AUD4_TXFS 0x1d4 0x3cc 0x474 0x12 0x001 > +#define MX25_PAD_FEC_TDATA1__GPIO_3_8 0x1d4 0x3cc 0x000 0x15 0x000 > + > +#define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x10 0x000 > +#define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x15 0x000 > + > +#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x10 0x000 > +#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x15 0x000 > + > +#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x10 0x000 > +#define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x15 0x000 > + > +#define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x10 0x000 > +#define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x14 0x000 > +#define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x15 0x000 > + > +#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1e8 0x3e0 0x000 0x10 0x000 > +#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 0x1e8 0x3e0 0x000 0x15 0x000 > + > +#define MX25_PAD_RTCK__RTCK 0x1ec 0x3e4 0x000 0x10 0x000 > +#define MX25_PAD_RTCK__OWIRE 0x1ec 0x3e4 0x000 0x11 0x000 > +#define MX25_PAD_RTCK__GPIO_3_14 0x1ec 0x3e4 0x000 0x15 0x000 > + > +#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x10 0x000 > +#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x15 0x000 > + > +#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000 > + > +#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x10 0x000 > +#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x16 0x000 > +#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x12 0x000 > + > +#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x10 0x000 > +#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001 > +#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x12 0x001 > + > +#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x10 0x000 > +#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000 > + > +#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000 > +#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000 > +#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001 > + > +#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000 > +#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000 > +#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000 > + > +#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000 > +#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000 > + > +#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000 > +#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x15 0x000 > + > +#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK 0x210 0x000 0x000 0x10 0x000 > +#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 0x210 0x000 0x000 0x15 0x000 > + > +#define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x10 0x000 > +#define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x14 0x000 > +#define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x15 0x000 > +#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000 > +#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000 > + > +#define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x10 0x000 > +#define MX25_PAD_POWER_FAIL__AUD7_RXD 0x21c 0x410 0x478 0x14 0x001 > +#define MX25_PAD_POWER_FAIL__GPIO_3_19 0x21c 0x410 0x000 0x15 0x000 > + > +#define MX25_PAD_CLKO__CLKO 0x220 0x414 0x000 0x10 0x000 > +#define MX25_PAD_CLKO__GPIO_2_21 0x220 0x414 0x000 0x15 0x000 > + > +#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 0x224 0x000 0x000 0x00 0x000 > +#define MX25_PAD_BOOT_MODE0__GPIO_4_30 0x224 0x000 0x000 0x05 0x000 > +#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 0x228 0x000 0x000 0x00 0x000 > +#define MX25_PAD_BOOT_MODE1__GPIO_4_31 0x228 0x000 0x000 0x05 0x000 > + > +#define MX25_PAD_CTL_GRP_DVS_MISC 0x000 0x418 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DSE_FEC 0x000 0x41c 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DVS_JTAG 0x000 0x420 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DSE_NFC 0x000 0x424 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DSE_CSI 0x000 0x428 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DSE_WEIM 0x000 0x42c 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DSE_DDR 0x000 0x430 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DVS_CRM 0x000 0x434 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DSE_KPP 0x000 0x438 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DSE_SDHC1 0x000 0x43c 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DSE_LCD 0x000 0x440 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DSE_UART 0x000 0x444 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DVS_NFC 0x000 0x448 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DVS_CSI 0x000 0x44c 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DSE_CSPI1 0x000 0x450 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DDRTYPE 0x000 0x454 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DVS_SDHC1 0x000 0x458 0x000 0x00 0x000 > +#define MX25_PAD_CTL_GRP_DVS_LCD 0x000 0x45c 0x000 0x00 0x000 > + > +#endif /* __DTS_IMX25_PINFUNC_H */ > diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi > index 737ed5d..5f9879d 100644 > --- a/arch/arm/boot/dts/imx25.dtsi > +++ b/arch/arm/boot/dts/imx25.dtsi > @@ -10,6 +10,7 @@ > */ > > #include "skeleton.dtsi" > +#include "imx25-pinfunc.h" > > / { > aliases { > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 23c1773..a0588bf 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -111,6 +111,8 @@ config SOC_IMX25 > select COMMON_CLK > select CPU_ARM926T > select MXC_AVIC > + select PINCTRL > + select PINCTRL_IMX25 > > config SOC_IMX27 > bool > diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig > index 21db201..d801589 100644 > --- a/drivers/pinctrl/Kconfig > +++ b/drivers/pinctrl/Kconfig > @@ -98,6 +98,14 @@ config PINCTRL_IMX > select PINMUX > select PINCONF > > +config PINCTRL_IMX25 > + bool "IMX25 pinctrl driver" > + depends on OF > + depends on SOC_IMX25 > + select PINCTRL_IMX > + help > + Say Y here to enable the imx25 pinctrl driver > + > config PINCTRL_IMX35 > bool "IMX35 pinctrl driver" > depends on OF > diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile > index bbeb980..32a856e 100644 > --- a/drivers/pinctrl/Makefile > +++ b/drivers/pinctrl/Makefile > @@ -30,6 +30,7 @@ obj-$(CONFIG_PINCTRL_IMX6SL) += pinctrl-imx6sl.o > obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o > obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o > obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o > +obj-$(CONFIG_PINCTRL_IMX25) += pinctrl-imx25.o > obj-$(CONFIG_PINCTRL_IMX28) += pinctrl-imx28.o > obj-$(CONFIG_PINCTRL_NOMADIK) += pinctrl-nomadik.o > obj-$(CONFIG_PINCTRL_STN8815) += pinctrl-nomadik-stn8815.o > diff --git a/drivers/pinctrl/pinctrl-imx25.c b/drivers/pinctrl/pinctrl-imx25.c > new file mode 100644 > index 0000000..8994b43 > --- /dev/null > +++ b/drivers/pinctrl/pinctrl-imx25.c > @@ -0,0 +1,351 @@ > +/* > + * imx25 pinctrl driver. > + * > + * Copyright 2013 Eukr?a Electromatique <denis@eukrea.com> > + * > + * This driver was mostly copied from the imx51 pinctrl driver which has: > + * > + * Copyright (C) 2012 Freescale Semiconductor, Inc. > + * Copyright (C) 2012 Linaro, Inc. > + * > + * Author: Dong Aisheng <dong.aisheng@linaro.org> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as published > + * by the Free Software Foundation. > + */ > + > +#include <linux/err.h> > +#include <linux/init.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/pinctrl/pinctrl.h> > + > +#include "pinctrl-imx.h" > + > +enum imx25_pads { > + MX25_PAD_RESERVE0 = 1, > + MX25_PAD_RESERVE1 = 2, > + MX25_PAD_A10 = 3, > + MX25_PAD_A13 = 4, > + MX25_PAD_A14 = 5, > + MX25_PAD_A15 = 6, > + MX25_PAD_A16 = 7, > + MX25_PAD_A17 = 8, > + MX25_PAD_A18 = 9, > + MX25_PAD_A19 = 10, > + MX25_PAD_A20 = 11, > + MX25_PAD_A21 = 12, > + MX25_PAD_A22 = 13, > + MX25_PAD_A23 = 14, > + MX25_PAD_A24 = 15, > + MX25_PAD_A25 = 16, > + MX25_PAD_EB0 = 17, > + MX25_PAD_EB1 = 18, > + MX25_PAD_OE = 19, > + MX25_PAD_CS0 = 20, > + MX25_PAD_CS1 = 21, > + MX25_PAD_CS4 = 22, > + MX25_PAD_CS5 = 23, > + MX25_PAD_NF_CE0 = 24, > + MX25_PAD_ECB = 25, > + MX25_PAD_LBA = 26, > + MX25_PAD_BCLK = 27, > + MX25_PAD_RW = 28, > + MX25_PAD_NFWE_B = 29, > + MX25_PAD_NFRE_B = 30, > + MX25_PAD_NFALE = 31, > + MX25_PAD_NFCLE = 32, > + MX25_PAD_NFWP_B = 33, > + MX25_PAD_NFRB = 34, > + MX25_PAD_D15 = 35, > + MX25_PAD_D14 = 36, > + MX25_PAD_D13 = 37, > + MX25_PAD_D12 = 38, > + MX25_PAD_D11 = 39, > + MX25_PAD_D10 = 40, > + MX25_PAD_D9 = 41, > + MX25_PAD_D8 = 42, > + MX25_PAD_D7 = 43, > + MX25_PAD_D6 = 44, > + MX25_PAD_D5 = 45, > + MX25_PAD_D4 = 46, > + MX25_PAD_D3 = 47, > + MX25_PAD_D2 = 48, > + MX25_PAD_D1 = 49, > + MX25_PAD_D0 = 50, > + MX25_PAD_LD0 = 51, > + MX25_PAD_LD1 = 52, > + MX25_PAD_LD2 = 53, > + MX25_PAD_LD3 = 54, > + MX25_PAD_LD4 = 55, > + MX25_PAD_LD5 = 56, > + MX25_PAD_LD6 = 57, > + MX25_PAD_LD7 = 58, > + MX25_PAD_LD8 = 59, > + MX25_PAD_LD9 = 60, > + MX25_PAD_LD10 = 61, > + MX25_PAD_LD11 = 62, > + MX25_PAD_LD12 = 63, > + MX25_PAD_LD13 = 64, > + MX25_PAD_LD14 = 65, > + MX25_PAD_LD15 = 66, > + MX25_PAD_HSYNC = 67, > + MX25_PAD_VSYNC = 68, > + MX25_PAD_LSCLK = 69, > + MX25_PAD_OE_ACD = 70, > + MX25_PAD_CONTRAST = 71, > + MX25_PAD_PWM = 72, > + MX25_PAD_CSI_D2 = 73, > + MX25_PAD_CSI_D3 = 74, > + MX25_PAD_CSI_D4 = 75, > + MX25_PAD_CSI_D5 = 76, > + MX25_PAD_CSI_D6 = 77, > + MX25_PAD_CSI_D7 = 78, > + MX25_PAD_CSI_D8 = 79, > + MX25_PAD_CSI_D9 = 80, > + MX25_PAD_CSI_MCLK = 81, > + MX25_PAD_CSI_VSYNC = 82, > + MX25_PAD_CSI_HSYNC = 83, > + MX25_PAD_CSI_PIXCLK = 84, > + MX25_PAD_I2C1_CLK = 85, > + MX25_PAD_I2C1_DAT = 86, > + MX25_PAD_CSPI1_MOSI = 87, > + MX25_PAD_CSPI1_MISO = 88, > + MX25_PAD_CSPI1_SS0 = 89, > + MX25_PAD_CSPI1_SS1 = 90, > + MX25_PAD_CSPI1_SCLK = 91, > + MX25_PAD_CSPI1_RDY = 92, > + MX25_PAD_UART1_RXD = 93, > + MX25_PAD_UART1_TXD = 94, > + MX25_PAD_UART1_RTS = 95, > + MX25_PAD_UART1_CTS = 96, > + MX25_PAD_UART2_RXD = 97, > + MX25_PAD_UART2_TXD = 98, > + MX25_PAD_UART2_RTS = 99, > + MX25_PAD_UART2_CTS = 100, > + MX25_PAD_SD1_CMD = 101, > + MX25_PAD_SD1_CLK = 102, > + MX25_PAD_SD1_DATA0 = 103, > + MX25_PAD_SD1_DATA1 = 104, > + MX25_PAD_SD1_DATA2 = 105, > + MX25_PAD_SD1_DATA3 = 106, > + MX25_PAD_KPP_ROW0 = 107, > + MX25_PAD_KPP_ROW1 = 108, > + MX25_PAD_KPP_ROW2 = 109, > + MX25_PAD_KPP_ROW3 = 110, > + MX25_PAD_KPP_COL0 = 111, > + MX25_PAD_KPP_COL1 = 112, > + MX25_PAD_KPP_COL2 = 113, > + MX25_PAD_KPP_COL3 = 114, > + MX25_PAD_FEC_MDC = 115, > + MX25_PAD_FEC_MDIO = 116, > + MX25_PAD_FEC_TDATA0 = 117, > + MX25_PAD_FEC_TDATA1 = 118, > + MX25_PAD_FEC_TX_EN = 119, > + MX25_PAD_FEC_RDATA0 = 120, > + MX25_PAD_FEC_RDATA1 = 121, > + MX25_PAD_FEC_RX_DV = 122, > + MX25_PAD_FEC_TX_CLK = 123, > + MX25_PAD_RTCK = 124, > + MX25_PAD_DE_B = 125, > + MX25_PAD_GPIO_A = 126, > + MX25_PAD_GPIO_B = 127, > + MX25_PAD_GPIO_C = 128, > + MX25_PAD_GPIO_D = 129, > + MX25_PAD_GPIO_E = 130, > + MX25_PAD_GPIO_F = 131, > + MX25_PAD_EXT_ARMCLK = 132, > + MX25_PAD_UPLL_BYPCLK = 133, > + MX25_PAD_VSTBY_REQ = 134, > + MX25_PAD_VSTBY_ACK = 135, > + MX25_PAD_POWER_FAIL = 136, > + MX25_PAD_CLKO = 137, > + MX25_PAD_BOOT_MODE0 = 138, > + MX25_PAD_BOOT_MODE1 = 139, > +}; > + > +/* Pad names for the pinmux subsystem */ > +static const struct pinctrl_pin_desc imx25_pinctrl_pads[] = { > + IMX_PINCTRL_PIN(MX25_PAD_RESERVE0), > + IMX_PINCTRL_PIN(MX25_PAD_RESERVE1), > + IMX_PINCTRL_PIN(MX25_PAD_A10), > + IMX_PINCTRL_PIN(MX25_PAD_A13), > + IMX_PINCTRL_PIN(MX25_PAD_A14), > + IMX_PINCTRL_PIN(MX25_PAD_A15), > + IMX_PINCTRL_PIN(MX25_PAD_A16), > + IMX_PINCTRL_PIN(MX25_PAD_A17), > + IMX_PINCTRL_PIN(MX25_PAD_A18), > + IMX_PINCTRL_PIN(MX25_PAD_A19), > + IMX_PINCTRL_PIN(MX25_PAD_A20), > + IMX_PINCTRL_PIN(MX25_PAD_A21), > + IMX_PINCTRL_PIN(MX25_PAD_A22), > + IMX_PINCTRL_PIN(MX25_PAD_A23), > + IMX_PINCTRL_PIN(MX25_PAD_A24), > + IMX_PINCTRL_PIN(MX25_PAD_A25), > + IMX_PINCTRL_PIN(MX25_PAD_EB0), > + IMX_PINCTRL_PIN(MX25_PAD_EB1), > + IMX_PINCTRL_PIN(MX25_PAD_OE), > + IMX_PINCTRL_PIN(MX25_PAD_CS0), > + IMX_PINCTRL_PIN(MX25_PAD_CS1), > + IMX_PINCTRL_PIN(MX25_PAD_CS4), > + IMX_PINCTRL_PIN(MX25_PAD_CS5), > + IMX_PINCTRL_PIN(MX25_PAD_NF_CE0), > + IMX_PINCTRL_PIN(MX25_PAD_ECB), > + IMX_PINCTRL_PIN(MX25_PAD_LBA), > + IMX_PINCTRL_PIN(MX25_PAD_BCLK), > + IMX_PINCTRL_PIN(MX25_PAD_RW), > + IMX_PINCTRL_PIN(MX25_PAD_NFWE_B), > + IMX_PINCTRL_PIN(MX25_PAD_NFRE_B), > + IMX_PINCTRL_PIN(MX25_PAD_NFALE), > + IMX_PINCTRL_PIN(MX25_PAD_NFCLE), > + IMX_PINCTRL_PIN(MX25_PAD_NFWP_B), > + IMX_PINCTRL_PIN(MX25_PAD_NFRB), > + IMX_PINCTRL_PIN(MX25_PAD_D15), > + IMX_PINCTRL_PIN(MX25_PAD_D14), > + IMX_PINCTRL_PIN(MX25_PAD_D13), > + IMX_PINCTRL_PIN(MX25_PAD_D12), > + IMX_PINCTRL_PIN(MX25_PAD_D11), > + IMX_PINCTRL_PIN(MX25_PAD_D10), > + IMX_PINCTRL_PIN(MX25_PAD_D9), > + IMX_PINCTRL_PIN(MX25_PAD_D8), > + IMX_PINCTRL_PIN(MX25_PAD_D7), > + IMX_PINCTRL_PIN(MX25_PAD_D6), > + IMX_PINCTRL_PIN(MX25_PAD_D5), > + IMX_PINCTRL_PIN(MX25_PAD_D4), > + IMX_PINCTRL_PIN(MX25_PAD_D3), > + IMX_PINCTRL_PIN(MX25_PAD_D2), > + IMX_PINCTRL_PIN(MX25_PAD_D1), > + IMX_PINCTRL_PIN(MX25_PAD_D0), > + IMX_PINCTRL_PIN(MX25_PAD_LD0), > + IMX_PINCTRL_PIN(MX25_PAD_LD1), > + IMX_PINCTRL_PIN(MX25_PAD_LD2), > + IMX_PINCTRL_PIN(MX25_PAD_LD3), > + IMX_PINCTRL_PIN(MX25_PAD_LD4), > + IMX_PINCTRL_PIN(MX25_PAD_LD5), > + IMX_PINCTRL_PIN(MX25_PAD_LD6), > + IMX_PINCTRL_PIN(MX25_PAD_LD7), > + IMX_PINCTRL_PIN(MX25_PAD_LD8), > + IMX_PINCTRL_PIN(MX25_PAD_LD9), > + IMX_PINCTRL_PIN(MX25_PAD_LD10), > + IMX_PINCTRL_PIN(MX25_PAD_LD11), > + IMX_PINCTRL_PIN(MX25_PAD_LD12), > + IMX_PINCTRL_PIN(MX25_PAD_LD13), > + IMX_PINCTRL_PIN(MX25_PAD_LD14), > + IMX_PINCTRL_PIN(MX25_PAD_LD15), > + IMX_PINCTRL_PIN(MX25_PAD_HSYNC), > + IMX_PINCTRL_PIN(MX25_PAD_VSYNC), > + IMX_PINCTRL_PIN(MX25_PAD_LSCLK), > + IMX_PINCTRL_PIN(MX25_PAD_OE_ACD), > + IMX_PINCTRL_PIN(MX25_PAD_CONTRAST), > + IMX_PINCTRL_PIN(MX25_PAD_PWM), > + IMX_PINCTRL_PIN(MX25_PAD_CSI_D2), > + IMX_PINCTRL_PIN(MX25_PAD_CSI_D3), > + IMX_PINCTRL_PIN(MX25_PAD_CSI_D4), > + IMX_PINCTRL_PIN(MX25_PAD_CSI_D5), > + IMX_PINCTRL_PIN(MX25_PAD_CSI_D6), > + IMX_PINCTRL_PIN(MX25_PAD_CSI_D7), > + IMX_PINCTRL_PIN(MX25_PAD_CSI_D8), > + IMX_PINCTRL_PIN(MX25_PAD_CSI_D9), > + IMX_PINCTRL_PIN(MX25_PAD_CSI_MCLK), > + IMX_PINCTRL_PIN(MX25_PAD_CSI_VSYNC), > + IMX_PINCTRL_PIN(MX25_PAD_CSI_HSYNC), > + IMX_PINCTRL_PIN(MX25_PAD_CSI_PIXCLK), > + IMX_PINCTRL_PIN(MX25_PAD_I2C1_CLK), > + IMX_PINCTRL_PIN(MX25_PAD_I2C1_DAT), > + IMX_PINCTRL_PIN(MX25_PAD_CSPI1_MOSI), > + IMX_PINCTRL_PIN(MX25_PAD_CSPI1_MISO), > + IMX_PINCTRL_PIN(MX25_PAD_CSPI1_SS0), > + IMX_PINCTRL_PIN(MX25_PAD_CSPI1_SS1), > + IMX_PINCTRL_PIN(MX25_PAD_CSPI1_SCLK), > + IMX_PINCTRL_PIN(MX25_PAD_CSPI1_RDY), > + IMX_PINCTRL_PIN(MX25_PAD_UART1_RXD), > + IMX_PINCTRL_PIN(MX25_PAD_UART1_TXD), > + IMX_PINCTRL_PIN(MX25_PAD_UART1_RTS), > + IMX_PINCTRL_PIN(MX25_PAD_UART1_CTS), > + IMX_PINCTRL_PIN(MX25_PAD_UART2_RXD), > + IMX_PINCTRL_PIN(MX25_PAD_UART2_TXD), > + IMX_PINCTRL_PIN(MX25_PAD_UART2_RTS), > + IMX_PINCTRL_PIN(MX25_PAD_UART2_CTS), > + IMX_PINCTRL_PIN(MX25_PAD_SD1_CMD), > + IMX_PINCTRL_PIN(MX25_PAD_SD1_CLK), > + IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA0), > + IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA1), > + IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA2), > + IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA3), > + IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW0), > + IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW1), > + IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW2), > + IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW3), > + IMX_PINCTRL_PIN(MX25_PAD_KPP_COL0), > + IMX_PINCTRL_PIN(MX25_PAD_KPP_COL1), > + IMX_PINCTRL_PIN(MX25_PAD_KPP_COL2), > + IMX_PINCTRL_PIN(MX25_PAD_KPP_COL3), > + IMX_PINCTRL_PIN(MX25_PAD_FEC_MDC), > + IMX_PINCTRL_PIN(MX25_PAD_FEC_MDIO), > + IMX_PINCTRL_PIN(MX25_PAD_FEC_TDATA0), > + IMX_PINCTRL_PIN(MX25_PAD_FEC_TDATA1), > + IMX_PINCTRL_PIN(MX25_PAD_FEC_TX_EN), > + IMX_PINCTRL_PIN(MX25_PAD_FEC_RDATA0), > + IMX_PINCTRL_PIN(MX25_PAD_FEC_RDATA1), > + IMX_PINCTRL_PIN(MX25_PAD_FEC_RX_DV), > + IMX_PINCTRL_PIN(MX25_PAD_FEC_TX_CLK), > + IMX_PINCTRL_PIN(MX25_PAD_RTCK), > + IMX_PINCTRL_PIN(MX25_PAD_DE_B), > + IMX_PINCTRL_PIN(MX25_PAD_GPIO_A), > + IMX_PINCTRL_PIN(MX25_PAD_GPIO_B), > + IMX_PINCTRL_PIN(MX25_PAD_GPIO_C), > + IMX_PINCTRL_PIN(MX25_PAD_GPIO_D), > + IMX_PINCTRL_PIN(MX25_PAD_GPIO_E), > + IMX_PINCTRL_PIN(MX25_PAD_GPIO_F), > + IMX_PINCTRL_PIN(MX25_PAD_EXT_ARMCLK), > + IMX_PINCTRL_PIN(MX25_PAD_UPLL_BYPCLK), > + IMX_PINCTRL_PIN(MX25_PAD_VSTBY_REQ), > + IMX_PINCTRL_PIN(MX25_PAD_VSTBY_ACK), > + IMX_PINCTRL_PIN(MX25_PAD_POWER_FAIL), > + IMX_PINCTRL_PIN(MX25_PAD_CLKO), > + IMX_PINCTRL_PIN(MX25_PAD_BOOT_MODE0), > + IMX_PINCTRL_PIN(MX25_PAD_BOOT_MODE1), > +}; > + > +static struct imx_pinctrl_soc_info imx25_pinctrl_info = { > + .pins = imx25_pinctrl_pads, > + .npins = ARRAY_SIZE(imx25_pinctrl_pads), > +}; > + > +static struct of_device_id imx25_pinctrl_of_match[] = { > + { .compatible = "fsl,imx25-iomuxc", }, > + { /* sentinel */ } > +}; > + > +static int imx25_pinctrl_probe(struct platform_device *pdev) > +{ > + return imx_pinctrl_probe(pdev, &imx25_pinctrl_info); > +} > + > +static struct platform_driver imx25_pinctrl_driver = { > + .driver = { > + .name = "imx25-pinctrl", > + .owner = THIS_MODULE, > + .of_match_table = of_match_ptr(imx25_pinctrl_of_match), > + }, > + .probe = imx25_pinctrl_probe, > + .remove = imx_pinctrl_remove, > +}; > + > +static int __init imx25_pinctrl_init(void) > +{ > + return platform_driver_register(&imx25_pinctrl_driver); > +} > +arch_initcall(imx25_pinctrl_init); > + > +static void __exit imx25_pinctrl_exit(void) > +{ > + platform_driver_unregister(&imx25_pinctrl_driver); > +} > +module_exit(imx25_pinctrl_exit); > +MODULE_AUTHOR("Denis Carikli <denis@eukrea.com>"); > +MODULE_DESCRIPTION("Freescale IMX25 pinctrl driver"); > +MODULE_LICENSE("GPL v2"); > -- > 1.7.9.5 > ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCHv5][ 6/9] ARM: dts: imx25.dtsi: Add some pinmux pins. 2013-10-23 8:29 [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique Denis Carikli ` (3 preceding siblings ...) 2013-10-23 8:29 ` [PATCHv5][ 5/9] pinctrl: pinctrl-imx: add imx25 pinctrl driver Denis Carikli @ 2013-10-23 8:29 ` Denis Carikli 2013-10-23 8:29 ` [PATCHv5][ 7/9] ARM: dts: i.MX25: Add ssi clocks and DMA events Denis Carikli ` (4 subsequent siblings) 9 siblings, 0 replies; 14+ messages in thread From: Denis Carikli @ 2013-10-23 8:29 UTC (permalink / raw) To: linux-arm-kernel Uart1, fec, i2c1,esdhc1 and audmux were added. I also added a label to the iomuxc device node like in: 7b7d672 ARM i.MX dts: Consistently add labels to devicenodes Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree at vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel at lists.infradead.org Cc: Eric B?nard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> --- arch/arm/boot/dts/imx25.dtsi | 104 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 103 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 5f9879d..6ac4c98 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -174,9 +174,111 @@ status = "disabled"; }; - iomuxc at 43fac000{ + iomuxc: iomuxc at 43fac000 { compatible = "fsl,imx25-iomuxc"; reg = <0x43fac000 0x4000>; + + audmux { + pinctrl_audmux_1: audmuxgrp-1 { + fsl,pins = < + MX25_PAD_KPP_COL3__AUD5_TXFS 0xe0 + MX25_PAD_KPP_COL2__AUD5_TXC 0xe0 + MX25_PAD_KPP_COL1__AUD5_RXD 0xe0 + MX25_PAD_KPP_COL0__AUD5_TXD 0xe0 + >; + }; + }; + + esdhc1 { + pinctrl_esdhc1_1: esdhc1grp-1 { + fsl,pins = < + MX25_PAD_SD1_CMD__SD1_CMD 0x400000c0 + MX25_PAD_SD1_CLK__SD1_CLK 0x400000c0 + MX25_PAD_SD1_DATA0__SD1_DATA0 0x400000c0 + MX25_PAD_SD1_DATA1__SD1_DATA1 0x400000c0 + MX25_PAD_SD1_DATA2__SD1_DATA2 0x400000c0 + MX25_PAD_SD1_DATA3__SD1_DATA3 0x400000c0 + >; + }; + }; + + fec { + pinctrl_fec_1: fecgrp-1 { + fsl,pins = < + MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0 + MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 + MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 + MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 + MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 + MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0 + >; + }; + }; + + i2c1 { + pinctrl_i2c1_1: i2c1grp-1 { + fsl,pins = < + MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000 + MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000 + >; + }; + }; + + lcdc { + pinctrl_lcdc_1: lcdcgrp-1 { + fsl,pins = < + MX25_PAD_LD0__LD0 0x1 + MX25_PAD_LD1__LD1 0x1 + MX25_PAD_LD2__LD2 0x1 + MX25_PAD_LD3__LD3 0x1 + MX25_PAD_LD4__LD4 0x1 + MX25_PAD_LD5__LD5 0x1 + MX25_PAD_LD6__LD6 0x1 + MX25_PAD_LD7__LD7 0x1 + MX25_PAD_LD8__LD8 0x1 + MX25_PAD_LD9__LD9 0x1 + MX25_PAD_LD10__LD10 0x1 + MX25_PAD_LD11__LD11 0x1 + MX25_PAD_LD12__LD12 0x1 + MX25_PAD_LD13__LD13 0x1 + MX25_PAD_LD14__LD14 0x1 + MX25_PAD_LD15__LD15 0x1 + MX25_PAD_GPIO_E__LD16 0x1 + MX25_PAD_GPIO_F__LD17 0x1 + + MX25_PAD_HSYNC__HSYNC 0x80000000 + MX25_PAD_VSYNC__VSYNC 0x80000000 + MX25_PAD_LSCLK__LSCLK 0x80000000 + MX25_PAD_OE_ACD__OE_ACD 0x80000000 + MX25_PAD_CONTRAST__CONTRAST 0x80000000 + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + MX25_PAD_UART1_RTS__UART1_RTS 0xe0 + MX25_PAD_UART1_CTS__UART1_CTS 0xe0 + MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 + MX25_PAD_UART1_RXD__UART1_RXD 0xc0 + >; + }; + }; + + uart2 { + pinctrl_uart2_1: uart2grp-1 { + fsl,pins = < + MX25_PAD_UART2_RXD__UART2_RXD 0x80000000 + MX25_PAD_UART2_TXD__UART2_TXD 0x80000000 + MX25_PAD_UART2_RTS__UART2_RTS 0x80000000 + MX25_PAD_UART2_CTS__UART2_CTS 0x80000000 + >; + }; + }; }; audmux at 43fb0000 { -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv5][ 7/9] ARM: dts: i.MX25: Add ssi clocks and DMA events. 2013-10-23 8:29 [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique Denis Carikli ` (4 preceding siblings ...) 2013-10-23 8:29 ` [PATCHv5][ 6/9] ARM: dts: imx25.dtsi: Add some pinmux pins Denis Carikli @ 2013-10-23 8:29 ` Denis Carikli 2013-10-24 6:44 ` Shawn Guo 2013-10-23 8:29 ` [PATCHv5][ 8/9] ARM: dts: i.MX25: Add sdma script path Denis Carikli ` (3 subsequent siblings) 9 siblings, 1 reply; 14+ messages in thread From: Denis Carikli @ 2013-10-23 8:29 UTC (permalink / raw) To: linux-arm-kernel Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree at vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel at lists.infradead.org Cc: Eric B?nard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> --- arch/arm/boot/dts/imx25.dtsi | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 6ac4c98..cce0669 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -339,6 +339,11 @@ compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; reg = <0x50014000 0x4000>; interrupts = <11>; + clocks = <&clks 118>; + clock-names = "ipg"; + dmas = <&sdma 24 1 0>, + <&sdma 25 1 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -369,6 +374,11 @@ compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; reg = <0x50034000 0x4000>; interrupts = <12>; + clocks = <&clks 117>; + clock-names = "ipg"; + dmas = <&sdma 28 1 0>, + <&sdma 29 1 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -539,7 +549,7 @@ #interrupt-cells = <2>; }; - sdma at 53fd4000 { + sdma: sdma at 53fd4000 { compatible = "fsl,imx25-sdma", "fsl,imx35-sdma"; reg = <0x53fd4000 0x4000>; clocks = <&clks 112>, <&clks 68>; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv5][ 7/9] ARM: dts: i.MX25: Add ssi clocks and DMA events. 2013-10-23 8:29 ` [PATCHv5][ 7/9] ARM: dts: i.MX25: Add ssi clocks and DMA events Denis Carikli @ 2013-10-24 6:44 ` Shawn Guo 0 siblings, 0 replies; 14+ messages in thread From: Shawn Guo @ 2013-10-24 6:44 UTC (permalink / raw) To: linux-arm-kernel On Wed, Oct 23, 2013 at 10:29:32AM +0200, Denis Carikli wrote: > Cc: Rob Herring <rob.herring@calxeda.com> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Stephen Warren <swarren@wwwdotorg.org> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Cc: devicetree at vger.kernel.org > Cc: Sascha Hauer <kernel@pengutronix.de> > Cc: linux-arm-kernel at lists.infradead.org > Cc: Eric B?nard <eric@eukrea.com> > Signed-off-by: Denis Carikli <denis@eukrea.com> Applied patches #7, #8 and #9. Shawn > --- > arch/arm/boot/dts/imx25.dtsi | 12 +++++++++++- > 1 file changed, 11 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi > index 6ac4c98..cce0669 100644 > --- a/arch/arm/boot/dts/imx25.dtsi > +++ b/arch/arm/boot/dts/imx25.dtsi > @@ -339,6 +339,11 @@ > compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; > reg = <0x50014000 0x4000>; > interrupts = <11>; > + clocks = <&clks 118>; > + clock-names = "ipg"; > + dmas = <&sdma 24 1 0>, > + <&sdma 25 1 0>; > + dma-names = "rx", "tx"; > status = "disabled"; > }; > > @@ -369,6 +374,11 @@ > compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; > reg = <0x50034000 0x4000>; > interrupts = <12>; > + clocks = <&clks 117>; > + clock-names = "ipg"; > + dmas = <&sdma 28 1 0>, > + <&sdma 29 1 0>; > + dma-names = "rx", "tx"; > status = "disabled"; > }; > > @@ -539,7 +549,7 @@ > #interrupt-cells = <2>; > }; > > - sdma at 53fd4000 { > + sdma: sdma at 53fd4000 { > compatible = "fsl,imx25-sdma", "fsl,imx35-sdma"; > reg = <0x53fd4000 0x4000>; > clocks = <&clks 112>, <&clks 68>; > -- > 1.7.9.5 > ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCHv5][ 8/9] ARM: dts: i.MX25: Add sdma script path. 2013-10-23 8:29 [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique Denis Carikli ` (5 preceding siblings ...) 2013-10-23 8:29 ` [PATCHv5][ 7/9] ARM: dts: i.MX25: Add ssi clocks and DMA events Denis Carikli @ 2013-10-23 8:29 ` Denis Carikli 2013-10-23 8:29 ` [PATCHv5][ 9/9] ARM: dts: imx25.dtsi: Add a label for the Audio Multiplexer Denis Carikli ` (2 subsequent siblings) 9 siblings, 0 replies; 14+ messages in thread From: Denis Carikli @ 2013-10-23 8:29 UTC (permalink / raw) To: linux-arm-kernel Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree at vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel at lists.infradead.org Cc: Eric B?nard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> --- arch/arm/boot/dts/imx25.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index cce0669..7c0a019 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -556,6 +556,7 @@ clock-names = "ipg", "ahb"; #dma-cells = <3>; interrupts = <34>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin"; }; wdog at 53fdc000 { -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv5][ 9/9] ARM: dts: imx25.dtsi: Add a label for the Audio Multiplexer. 2013-10-23 8:29 [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique Denis Carikli ` (6 preceding siblings ...) 2013-10-23 8:29 ` [PATCHv5][ 8/9] ARM: dts: i.MX25: Add sdma script path Denis Carikli @ 2013-10-23 8:29 ` Denis Carikli 2013-10-23 22:54 ` [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique Rob Herring 2013-10-24 6:29 ` Shawn Guo 9 siblings, 0 replies; 14+ messages in thread From: Denis Carikli @ 2013-10-23 8:29 UTC (permalink / raw) To: linux-arm-kernel Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree at vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel at lists.infradead.org Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Eric B?nard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> --- ChangeLog v4->v5: Changed the description to label (was wrongly named alias). --- arch/arm/boot/dts/imx25.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 7c0a019..800fe7f 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -281,7 +281,7 @@ }; }; - audmux at 43fb0000 { + audmux: audmux at 43fb0000 { compatible = "fsl,imx25-audmux", "fsl,imx31-audmux"; reg = <0x43fb0000 0x4000>; status = "disabled"; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique. 2013-10-23 8:29 [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique Denis Carikli ` (7 preceding siblings ...) 2013-10-23 8:29 ` [PATCHv5][ 9/9] ARM: dts: imx25.dtsi: Add a label for the Audio Multiplexer Denis Carikli @ 2013-10-23 22:54 ` Rob Herring 2013-10-24 6:29 ` Shawn Guo 9 siblings, 0 replies; 14+ messages in thread From: Rob Herring @ 2013-10-23 22:54 UTC (permalink / raw) To: linux-arm-kernel On 10/23/2013 03:29 AM, Denis Carikli wrote: > Trivial patch to add Eukr?a Electromatique to the list > of devicetree vendor prefixes. > > Cc: Rob Herring <rob.herring@calxeda.com> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Stephen Warren <swarren@wwwdotorg.org> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Cc: devicetree at vger.kernel.org > Cc: Sascha Hauer <kernel@pengutronix.de> > Cc: linux-arm-kernel at lists.infradead.org > Cc: Eric B?nard <eric@eukrea.com> > Signed-off-by: Denis Carikli <denis@eukrea.com> Acked-by: Rob Herring <rob.herring@calxeda.com> > --- > .../devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index 2956800..a0329cf 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -25,6 +25,7 @@ denx Denx Software Engineering > emmicro EM Microelectronic > epson Seiko Epson Corp. > est ESTeem Wireless Modems > +eukrea Eukr?a Electromatique > fsl Freescale Semiconductor > GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. > gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. > ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique. 2013-10-23 8:29 [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique Denis Carikli ` (8 preceding siblings ...) 2013-10-23 22:54 ` [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique Rob Herring @ 2013-10-24 6:29 ` Shawn Guo 9 siblings, 0 replies; 14+ messages in thread From: Shawn Guo @ 2013-10-24 6:29 UTC (permalink / raw) To: linux-arm-kernel On Wed, Oct 23, 2013 at 10:29:26AM +0200, Denis Carikli wrote: > Trivial patch to add Eukr?a Electromatique to the list > of devicetree vendor prefixes. > > Cc: Rob Herring <rob.herring@calxeda.com> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Stephen Warren <swarren@wwwdotorg.org> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Cc: devicetree at vger.kernel.org > Cc: Sascha Hauer <kernel@pengutronix.de> > Cc: linux-arm-kernel at lists.infradead.org > Cc: Eric B?nard <eric@eukrea.com> > Signed-off-by: Denis Carikli <denis@eukrea.com> Applied, thanks. Shawn > --- > .../devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index 2956800..a0329cf 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -25,6 +25,7 @@ denx Denx Software Engineering > emmicro EM Microelectronic > epson Seiko Epson Corp. > est ESTeem Wireless Modems > +eukrea Eukr?a Electromatique > fsl Freescale Semiconductor > GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. > gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. > -- > 1.7.9.5 > ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2013-10-24 6:44 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-23 8:29 [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique Denis Carikli
2013-10-23 8:29 ` [PATCHv5][ 2/9] video: imxfb: Introduce regulator support Denis Carikli
2013-10-23 8:29 ` [PATCHv5][ 3/9] video: imxfb: Also add pwmr for the device tree Denis Carikli
2013-10-23 8:29 ` [PATCHv5][ 4/9] ARM: imx{25, 27} DT: Permit the selection of the imxfb framebuffer driver Denis Carikli
2013-10-24 6:32 ` [PATCHv5][ 4/9] ARM: imx{25,27} " Shawn Guo
2013-10-23 8:29 ` [PATCHv5][ 5/9] pinctrl: pinctrl-imx: add imx25 pinctrl driver Denis Carikli
2013-10-24 6:36 ` Shawn Guo
2013-10-23 8:29 ` [PATCHv5][ 6/9] ARM: dts: imx25.dtsi: Add some pinmux pins Denis Carikli
2013-10-23 8:29 ` [PATCHv5][ 7/9] ARM: dts: i.MX25: Add ssi clocks and DMA events Denis Carikli
2013-10-24 6:44 ` Shawn Guo
2013-10-23 8:29 ` [PATCHv5][ 8/9] ARM: dts: i.MX25: Add sdma script path Denis Carikli
2013-10-23 8:29 ` [PATCHv5][ 9/9] ARM: dts: imx25.dtsi: Add a label for the Audio Multiplexer Denis Carikli
2013-10-23 22:54 ` [PATCHv5][ 1/9] of: add vendor prefix for Eukrea Electromatique Rob Herring
2013-10-24 6:29 ` Shawn Guo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).