* Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property
[not found] <1383680783-12114-6-git-send-email-ivan.khoronzhuk@ti.com>
@ 2013-11-06 11:32 ` ivan.khoronzhuk
2013-11-12 15:38 ` Santosh Shilimkar
2013-11-17 2:25 ` Guenter Roeck
0 siblings, 2 replies; 3+ messages in thread
From: ivan.khoronzhuk @ 2013-11-06 11:32 UTC (permalink / raw)
To: linux-arm-kernel
Since Davinci WDT has been switched to use WDT core, it became able
to support timeout-sec property, so add it to it's binding description.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
---
.../devicetree/bindings/watchdog/davinci-wdt.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
index 75558cc..1668b6e 100644
--- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
@@ -4,9 +4,14 @@ Required properties:
- compatible : Should be "ti,davinci-wdt"
- reg : Should contain WDT registers location and length
+Optional properties:
+
+- timeout-sec: Contains the watchdog timeout in seconds
+
Examples:
wdt: wdt at 2320000 {
compatible = "ti,davinci-wdt";
reg = <0x02320000 0x80>;
+ timeout-sec = <30>;
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property
2013-11-06 11:32 ` Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property ivan.khoronzhuk
@ 2013-11-12 15:38 ` Santosh Shilimkar
2013-11-17 2:25 ` Guenter Roeck
1 sibling, 0 replies; 3+ messages in thread
From: Santosh Shilimkar @ 2013-11-12 15:38 UTC (permalink / raw)
To: linux-arm-kernel
On Wednesday 06 November 2013 06:32 AM, ivan.khoronzhuk wrote:
> Since Davinci WDT has been switched to use WDT core, it became able
> to support timeout-sec property, so add it to it's binding description.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
> ---
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property
2013-11-06 11:32 ` Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property ivan.khoronzhuk
2013-11-12 15:38 ` Santosh Shilimkar
@ 2013-11-17 2:25 ` Guenter Roeck
1 sibling, 0 replies; 3+ messages in thread
From: Guenter Roeck @ 2013-11-17 2:25 UTC (permalink / raw)
To: linux-arm-kernel
On 11/06/2013 03:32 AM, ivan.khoronzhuk wrote:
> Since Davinci WDT has been switched to use WDT core, it became able
> to support timeout-sec property, so add it to it's binding description.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
> ---
> .../devicetree/bindings/watchdog/davinci-wdt.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> index 75558cc..1668b6e 100644
> --- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> @@ -4,9 +4,14 @@ Required properties:
> - compatible : Should be "ti,davinci-wdt"
> - reg : Should contain WDT registers location and length
>
> +Optional properties:
> +
empty line not needed here (and inconsistent).
> +- timeout-sec: Contains the watchdog timeout in seconds
> +
Formatting is different to other bindings.
> Examples:
>
> wdt: wdt at 2320000 {
> compatible = "ti,davinci-wdt";
> reg = <0x02320000 0x80>;
> + timeout-sec = <30>;
> };
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-11-17 2:25 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1383680783-12114-6-git-send-email-ivan.khoronzhuk@ti.com>
2013-11-06 11:32 ` Fwd: [PATCH 5/8] watchdog: davinci: add "timeout-sec" property ivan.khoronzhuk
2013-11-12 15:38 ` Santosh Shilimkar
2013-11-17 2:25 ` Guenter Roeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).