From: linux@roeck-us.net (Guenter Roeck)
To: linux-arm-kernel@lists.infradead.org
Subject: Fwd: [PATCH 6/8] watchdog: davinci: reuse driver for keystone arch
Date: Sat, 16 Nov 2013 18:27:23 -0800 [thread overview]
Message-ID: <5288298B.1010602@roeck-us.net> (raw)
In-Reply-To: <527A28DE.4030906@ti.com>
On 11/06/2013 03:32 AM, ivan.khoronzhuk wrote:
> The keystone arch use the same IP watchdog, so add "ti,keystone-wdt"
> compatible and correct identity.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
> ---
> .../devicetree/bindings/watchdog/davinci-wdt.txt | 11 +++++++++--
> drivers/watchdog/Kconfig | 4 ++--
> drivers/watchdog/davinci_wdt.c | 3 ++-
> 3 files changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> index 1668b6e..fddced9 100644
> --- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> @@ -1,13 +1,20 @@
> -DaVinci Watchdog Timer (WDT) Controller
> +Texas Instruments DaVinci/Keystone Watchdog Timer (WDT) Controller
>
> Required properties:
> -- compatible : Should be "ti,davinci-wdt"
> +
> +- compatible: "ti,davinci-wdt"
> + "ti,keystone-wdt"
> +
> - reg : Should contain WDT registers location and length
>
Please use consistent formatting. If you change it, at least change it to be consistent.
> Optional properties:
>
> - timeout-sec: Contains the watchdog timeout in seconds
>
> +Documentation:
> +Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
> +Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
> +
> Examples:
>
> wdt: wdt at 2320000 {
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 2c954b5..a4fe130 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -270,11 +270,11 @@ config IOP_WATCHDOG
>
> config DAVINCI_WATCHDOG
> tristate "DaVinci watchdog"
> - depends on ARCH_DAVINCI
> + depends on ARCH_DAVINCI || ARCH_KEYSTONE
> select WATCHDOG_CORE
> help
> Say Y here if to include support for the watchdog timer
> - in the DaVinci DM644x/DM646x processors.
> + in the DaVinci DM644x/DM646x or Keystone processors.
> To compile this driver as a module, choose M here: the
> module will be called davinci_wdt.
>
> diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
> index a371b2d..e51fd2e 100644
> --- a/drivers/watchdog/davinci_wdt.c
> +++ b/drivers/watchdog/davinci_wdt.c
> @@ -158,7 +158,7 @@ static unsigned int davinci_wdt_status(struct watchdog_device *wdd)
>
> static const struct watchdog_info davinci_wdt_info = {
> .options = WDIOF_KEEPALIVEPING,
> - .identity = "DaVinci Watchdog",
> + .identity = "DaVinci/Keystone Watchdog",
> };
>
> static const struct watchdog_ops davinci_wdt_ops = {
> @@ -229,6 +229,7 @@ static int davinci_wdt_remove(struct platform_device *pdev)
>
> static const struct of_device_id davinci_wdt_of_match[] = {
> { .compatible = "ti,davinci-wdt", },
> + { .compatible = "ti,keystone-wdt", },
> {},
> };
> MODULE_DEVICE_TABLE(of, davinci_wdt_of_match);
>
next prev parent reply other threads:[~2013-11-17 2:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1383680783-12114-7-git-send-email-ivan.khoronzhuk@ti.com>
2013-11-06 11:32 ` Fwd: [PATCH 6/8] watchdog: davinci: reuse driver for keystone arch ivan.khoronzhuk
2013-11-12 15:40 ` Santosh Shilimkar
2013-11-17 2:27 ` Guenter Roeck [this message]
2013-11-18 15:03 ` ivan.khoronzhuk
2013-11-23 18:02 ` Arnd Bergmann
2013-11-25 11:09 ` ivan.khoronzhuk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5288298B.1010602@roeck-us.net \
--to=linux@roeck-us.net \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).