[PATCH] mmc: atmel-mci: fix timeout errors in SDIO mode when using DMA

[nicolas.ferre@atmel.com (Nicolas Ferre)]

On 20/11/2013 16:01, ludovic.desroches at atmel.com :
> From: Ludovic Desroches <ludovic.desroches@atmel.com>
>
> With some SDIO devices, timeout errors can happen when reading data. To solve
> this issue the DMA transfer has to be activated before sending the command to
> the device. This order is incorrect in PDC mode. So we have to take care if we
> are using DMA or PDC to know when to send the MMC command.
>
> Cc: <stable@vger.kernel.org> #3.2+
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Thanks, bye,

> ---
>   drivers/mmc/host/atmel-mci.c |   13 ++++++++++++-
>   1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
> index b8dfe0d..289da71 100644
> --- a/drivers/mmc/host/atmel-mci.c
> +++ b/drivers/mmc/host/atmel-mci.c
> @@ -1193,11 +1193,22 @@ static void atmci_start_request(struct atmel_mci *host,
>   	iflags |= ATMCI_CMDRDY;
>   	cmd = mrq->cmd;
>   	cmdflags = atmci_prepare_command(slot->mmc, cmd);
> -	atmci_send_command(host, cmd, cmdflags);
> +
> +	/*
> +	 * DMA transfer should be started before sending the command to avoid
> +	 * unexpected errors especially for read operations in SDIO mode.
> +	 * Unfortunately, in PDC mode, command has to be sent before starting
> +	 * the transfer.
> +	 */
> +	if (host->submit_data != &atmci_submit_data_dma)
> +		atmci_send_command(host, cmd, cmdflags);
>
>   	if (data)
>   		host->submit_data(host, data);
>
> +	if (host->submit_data == &atmci_submit_data_dma)
> +		atmci_send_command(host, cmd, cmdflags);
> +
>   	if (mrq->stop) {
>   		host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
>   		host->stop_cmdr |= ATMCI_CMDR_STOP_XFER;
>


-- 
Nicolas Ferre