[PATCH] mmc: atmel-mci: fix timeout errors in SDIO mode when using DMA

[PATCH] mmc: atmel-mci: fix timeout errors in SDIO mode when using DMA

[ludovic.desroches at atmel.com]

From: Ludovic Desroches <ludovic.desroches@atmel.com>

With some SDIO devices, timeout errors can happen when reading data. To solve
this issue the DMA transfer has to be activated before sending the command to
the device. This order is incorrect in PDC mode. So we have to take care if we
are using DMA or PDC to know when to send the MMC command.

Cc: <stable@vger.kernel.org> #3.2+
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
---
 drivers/mmc/host/atmel-mci.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index b8dfe0d..289da71 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1193,11 +1193,22 @@ static void atmci_start_request(struct atmel_mci *host,
 	iflags |= ATMCI_CMDRDY;
 	cmd = mrq->cmd;
 	cmdflags = atmci_prepare_command(slot->mmc, cmd);
-	atmci_send_command(host, cmd, cmdflags);
+
+	/*
+	 * DMA transfer should be started before sending the command to avoid
+	 * unexpected errors especially for read operations in SDIO mode.
+	 * Unfortunately, in PDC mode, command has to be sent before starting
+	 * the transfer.
+	 */
+	if (host->submit_data != &atmci_submit_data_dma)
+		atmci_send_command(host, cmd, cmdflags);
 
 	if (data)
 		host->submit_data(host, data);
 
+	if (host->submit_data == &atmci_submit_data_dma)
+		atmci_send_command(host, cmd, cmdflags);
+
 	if (mrq->stop) {
 		host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
 		host->stop_cmdr |= ATMCI_CMDR_STOP_XFER;
-- 
1.7.9.5

[PATCH] mmc: atmel-mci: fix timeout errors in SDIO mode when using DMA

[Nicolas Ferre]

On 20/11/2013 16:01, ludovic.desroches at atmel.com :
> From: Ludovic Desroches <ludovic.desroches@atmel.com>
>
> With some SDIO devices, timeout errors can happen when reading data. To solve
> this issue the DMA transfer has to be activated before sending the command to
> the device. This order is incorrect in PDC mode. So we have to take care if we
> are using DMA or PDC to know when to send the MMC command.
>
> Cc: <stable@vger.kernel.org> #3.2+
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Thanks, bye,

> ---
>   drivers/mmc/host/atmel-mci.c |   13 ++++++++++++-
>   1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
> index b8dfe0d..289da71 100644
> --- a/drivers/mmc/host/atmel-mci.c
> +++ b/drivers/mmc/host/atmel-mci.c
> @@ -1193,11 +1193,22 @@ static void atmci_start_request(struct atmel_mci *host,
>   	iflags |= ATMCI_CMDRDY;
>   	cmd = mrq->cmd;
>   	cmdflags = atmci_prepare_command(slot->mmc, cmd);
> -	atmci_send_command(host, cmd, cmdflags);
> +
> +	/*
> +	 * DMA transfer should be started before sending the command to avoid
> +	 * unexpected errors especially for read operations in SDIO mode.
> +	 * Unfortunately, in PDC mode, command has to be sent before starting
> +	 * the transfer.
> +	 */
> +	if (host->submit_data != &atmci_submit_data_dma)
> +		atmci_send_command(host, cmd, cmdflags);
>
>   	if (data)
>   		host->submit_data(host, data);
>
> +	if (host->submit_data == &atmci_submit_data_dma)
> +		atmci_send_command(host, cmd, cmdflags);
> +
>   	if (mrq->stop) {
>   		host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
>   		host->stop_cmdr |= ATMCI_CMDR_STOP_XFER;
>


-- 
Nicolas Ferre

[PATCH] mmc: atmel-mci: fix timeout errors in SDIO mode when using DMA

[Chris Ball]

Hi,

On Thu, Nov 21 2013, Nicolas Ferre wrote:
> On 20/11/2013 16:01, ludovic.desroches at atmel.com :
>> From: Ludovic Desroches <ludovic.desroches@atmel.com>
>>
>> With some SDIO devices, timeout errors can happen when reading data. To solve
>> this issue the DMA transfer has to be activated before sending the command to
>> the device. This order is incorrect in PDC mode. So we have to take care if we
>> are using DMA or PDC to know when to send the MMC command.
>>
>> Cc: <stable@vger.kernel.org> #3.2+
>> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
>
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Thanks, pushed to mmc-next for 3.14.

- Chris.
-- 
Chris Ball   <cjb@laptop.org>   <http://printf.net/>

[PATCH] mmc: atmel-mci: fix timeout errors in SDIO mode when using DMA

[Nicolas Ferre]

On 26/11/2013 23:24, Chris Ball :
> Hi,
>
> On Thu, Nov 21 2013, Nicolas Ferre wrote:
>> On 20/11/2013 16:01, ludovic.desroches at atmel.com :
>>> From: Ludovic Desroches <ludovic.desroches@atmel.com>
>>>
>>> With some SDIO devices, timeout errors can happen when reading data. To solve
>>> this issue the DMA transfer has to be activated before sending the command to
>>> the device. This order is incorrect in PDC mode. So we have to take care if we
>>> are using DMA or PDC to know when to send the MMC command.
>>>
>>> Cc: <stable@vger.kernel.org> #3.2+
>>> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
>>
>> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>
> Thanks, pushed to mmc-next for 3.14.

Nice, thank you Chris, but what about considering its inclusion in 3.13?

I know that it will anyway hit the 3.13.y stable update but I do think 
that it would be nice to have this fix sooner in official 3.13...

Bye,
-- 
Nicolas Ferre