[PATCH 2/2] ARM: OMAP5: Add HYP mode entry support for secondary CPUs

[marc.zyngier@arm.com (Marc Zyngier)]

On 25/11/13 16:28, Santosh Shilimkar wrote:
> On Monday 25 November 2013 10:09 AM, Christoffer Dall wrote:
>> On 23 November 2013 16:07, Santosh Shilimkar <santosh.shilimkar@ti.com> wrote:
>>> Boot-CPU entry into the HYP mode is managed in boot-loader but
>>> the secondary CPUs directly jumps to kernel during boot. Same
>>> path is also used for CPU hotplug as well during suspend for
>>> secondary CPU.
>>>
>>> Hence patch the secondary CPU boot path for hyp mode etry.
>>>
>>> Cc: Marc Zyngier <marc.zyngier@arm.com>
>>> Cc: Christoffer Dall <christoffer.dall@linaro.org>
>>> Cc: Tony Lindgren <tony@atomide.com>
>>> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
>>> ---
>>>  arch/arm/mach-omap2/omap-headsmp.S |    7 +++++++
>>>  1 file changed, 7 insertions(+)
>>>
>>> diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
>>> index 75e9295..4844dd8 100644
>>> --- a/arch/arm/mach-omap2/omap-headsmp.S
>>> +++ b/arch/arm/mach-omap2/omap-headsmp.S
>>> @@ -22,6 +22,7 @@
>>>
>>>  /* Physical address needed since MMU not enabled yet on secondary core */
>>>  #define AUX_CORE_BOOT0_PA                      0x48281800
>>> +#define API_HYP_ENTRY                          0x102
>>>
>>>  /*
>>>   * OMAP5 specific entry point for secondary CPU to jump from ROM
>>> @@ -38,6 +39,12 @@ wait:        ldr     r2, =AUX_CORE_BOOT0_PA  @ read from AuxCoreBoot0
>>>         and     r4, r4, #0x0f
>>>         cmp     r0, r4
>>>         bne     wait
>>> +#ifdef CONFIG_KVM_ARM_HOST
>>> +       ldr     r12, =API_HYP_ENTRY
>>> +       adr     r0, hyp_boot
>>> +       smc     #0
>>> +hyp_boot:
>>> +#endif
>>>         b       secondary_startup
>>>  END(omap5_secondary_startup)
>>>  /*
>>
>> hmm, this means that currently running this in a guest will fail to
>> bring-up SMP, right?
>>
> Nope. Because the code under 'KVM_ARM_HOST' macro. Guest build 
> will not enable CONFIG_KVM_ARM_HOST and things should be fine then.
> Right ? 

Absolutely not. We're way past the "one image per usage" model, and I
fully expect the same kernel to boot both as a guest and a host.
Otherwise, multiplatform is just a joke.

>> Couldn't you create a little wrapper-pen in U-Boot instead, which
>> replicates the omap boot protocol and takes care of the hyp-mode
>> startup there instead, keeping this completely out of the kernel?
>>
> Its not just booting but CPU hotplug also follows the same path
> so we need the mechanism in kernel to switch mode.
> 
> In general, I think its important to consider the aspect with
> CPU PM. CPUs are not going to go through the boot-loaders in
> those paths and hence need of HYP entry in the kernel will
> be must.

I definitely agree that you need to consider PM as well. But we've
decided a long time ago that we wouldn't take that kind of code in the
kernel. Your CPU has to reach the kernel in HYP, and that is down to
your boot protocol to take care off that.

There are a few options. Christoffer mentioned having a pen, and you
also could implement PSCI fairly easily (I've recently posted a u-boot
patch series to take care of this, though there is still a fair bit of
work required).

Whatever the approach is, the bottom line remains: your CPU enters the
kernel in HYP.

Cheers,

	M.
-- 
Jazz is not dead. It just smells funny...