[GIT PULL RESEND2] clocksource/clockevents fixes for 3.13

[GIT PULL RESEND2] clocksource/clockevents fixes for 3.13

[Daniel Lezcano]

Hi Thomas, Ingo,

here are the fixes for 3.13 based on timers/urgent

  * Axel Lin added a missing dependency on CLKSRC_MMIO in the Kconfig 
for the time-efm32

  * Dinh Nguyen fixed read_sched_clock to return the right value and 
added the clksrc-of missing definition for the dw_apb_timer

  * Ezequiel Garcia registered the sched clock after the counter, thus 
preventing time jump in the traces for the armada-370-xp

  * Marc Zyngier stopped the timer before enabling the irq in order to 
prevent it to be fired before the clockevent is registered for the sunxi

  * Thierry Reding removed a of_node_put in clksrc-of because the 
reference is not held

Thanks
   -- Daniel

----------------------------------------------------------------

The following changes since commit 0e576acbc1d9600cf2d9b4a141a2554639959d50:

   nohz: Fix another inconsistency between CONFIG_NO_HZ=n and nohz=off 
(2013-11-29 12:23:03 +0100)

are available in the git repository at:

   git://git.linaro.org/people/daniel.lezcano/linux.git clockevents/fixes

for you to fetch changes up to 9ab4727c1d41e50b67aecde4bf11879560a3ca78:

   clocksource: dw_apb_timer_of: Fix support for dts binding 
"snps,dw-apb-timer" (2013-12-10 19:49:18 +0100)

----------------------------------------------------------------
Axel Lin (1):
       clocksource: time-efm32: Select CLKSRC_MMIO

Dinh Nguyen (2):
       clocksource: dw_apb_timer_of: Fix read_sched_clock
       clocksource: dw_apb_timer_of: Fix support for dts binding 
"snps,dw-apb-timer"

Ezequiel Garcia (1):
       clocksource: armada-370-xp: Register sched_clock after the 
counter reset

Marc Zyngier (1):
       clocksource: sunxi: Stop timer from ticking before enabling 
interrupts

Thierry Reding (1):
       clocksource: clksrc-of: Do not drop unheld reference on device node

  drivers/clocksource/Kconfig              |    1 +
  drivers/clocksource/clksrc-of.c          |    1 -
  drivers/clocksource/dw_apb_timer_of.c    |    7 ++++---
  drivers/clocksource/sun4i_timer.c        |    3 +++
  drivers/clocksource/time-armada-370-xp.c |   10 +++++-----
  5 files changed, 13 insertions(+), 9 deletions(-)


-- 
  <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

[PATCH 1/6] clocksource: time-efm32: Select CLKSRC_MMIO

[Daniel Lezcano]

From: Axel Lin <axel.lin@ingics.com>

The time-efm32 driver uses the clocksource MMIO functions.
Thus it needs to select CLKSRC_MMIO in Kconfig.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 drivers/clocksource/Kconfig |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 5c07a56..634c4d6 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -75,6 +75,7 @@ config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
 config CLKSRC_EFM32
 	bool "Clocksource for Energy Micro's EFM32 SoCs" if !ARCH_EFM32
 	depends on OF && ARM && (ARCH_EFM32 || COMPILE_TEST)
+	select CLKSRC_MMIO
 	default ARCH_EFM32
 	help
 	  Support to use the timers of EFM32 SoCs as clock source and clock
-- 
1.7.9.5

[PATCH 2/6] clocksource: armada-370-xp: Register sched_clock after the counter reset

[Daniel Lezcano]

From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>

This commit registers the sched_clock _after_ the counter reset
(instead of before). This removes the timestamp 'jump' in kernel
log messages.

Before this change:

[    0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798691800ns
[    0.000000] Initializing Coherency fabric
[    0.000000] Aurora cache controller enabled
[    0.000000] l2x0: 16 ways, CACHE_ID 0x00000100, AUX_CTRL 0x1a696b12, Cache size: 1024 kB
[  163.507447] Calibrating delay loop... 1325.05 BogoMIPS (lpj=662528)
[  163.521419] pid_max: default: 32768 minimum: 301
[  163.526185] Mount-cache hash table entries: 512
[  163.531095] CPU: Testing write buffer coherency: ok

After this change:

[    0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798691800ns
[    0.000000] Initializing Coherency fabric
[    0.000000] Aurora cache controller enabled
[    0.000000] l2x0: 16 ways, CACHE_ID 0x00000100, AUX_CTRL 0x1a696b12, Cache size: 1024 kB
[    0.016849] Calibrating delay loop... 1325.05 BogoMIPS (lpj=662528)
[    0.030820] pid_max: default: 32768 minimum: 301
[    0.035588] Mount-cache hash table entries: 512
[    0.040500] CPU: Testing write buffer coherency: ok

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
---
 drivers/clocksource/time-armada-370-xp.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index d8e47e5..4e7f680 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -256,11 +256,6 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
 	ticks_per_jiffy = (timer_clk + HZ / 2) / HZ;
 
 	/*
-	 * Set scale and timer for sched_clock.
-	 */
-	sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk);
-
-	/*
 	 * Setup free-running clocksource timer (interrupts
 	 * disabled).
 	 */
@@ -270,6 +265,11 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
 	timer_ctrl_clrset(0, TIMER0_EN | TIMER0_RELOAD_EN |
 			     TIMER0_DIV(TIMER_DIVIDER_SHIFT));
 
+	/*
+	 * Set scale and timer for sched_clock.
+	 */
+	sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk);
+
 	clocksource_mmio_init(timer_base + TIMER0_VAL_OFF,
 			      "armada_370_xp_clocksource",
 			      timer_clk, 300, 32, clocksource_mmio_readl_down);
-- 
1.7.9.5

[PATCH 3/6] clocksource: clksrc-of: Do not drop unheld reference on device node

[Daniel Lezcano]

From: Thierry Reding <thierry.reding@gmail.com>

When booting a recent kernel on ARM with OF_DYNAMIC enabled, the kernel
warns about the following:

	[    0.000000] ERROR: Bad of_node_put() on /timer at 50004600
	[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0-rc5-next-20131017-00077-gedfd827-dirty #406
	[    0.000000] [<c0015b68>] (unwind_backtrace+0x0/0xf4) from [<c00117e4>] (show_stack+0x10/0x14)
	[    0.000000] [<c00117e4>] (show_stack+0x10/0x14) from [<c055f734>] (dump_stack+0x9c/0xc8)
	[    0.000000] [<c055f734>] (dump_stack+0x9c/0xc8) from [<c03b47d4>] (of_node_release+0x90/0x9c)
	[    0.000000] [<c03b47d4>] (of_node_release+0x90/0x9c) from [<c03b5084>] (of_find_matching_node_and_match+0x78/0xb4)
	[    0.000000] [<c03b5084>] (of_find_matching_node_and_match+0x78/0xb4) from [<c07887c8>] (clocksource_of_init+0x60/0x70)
	[    0.000000] [<c07887c8>] (clocksource_of_init+0x60/0x70) from [<c076e99c>] (start_kernel+0x1f4/0x33c)
	[    0.000000] [<c076e99c>] (start_kernel+0x1f4/0x33c) from [<80008074>] (0x80008074)

This is caused by clocksource_of_init() dropping a reference on the
device node that it never took. The reference taken by the loop is
implicitly dropped on subsequent iterations. See the implementation of
and the comment on top of the of_find_matching_node_and_match()
function for reference (no pun intended).

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 drivers/clocksource/clksrc-of.c |    1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c
index 35639cf4..b9ddd9e 100644
--- a/drivers/clocksource/clksrc-of.c
+++ b/drivers/clocksource/clksrc-of.c
@@ -35,6 +35,5 @@ void __init clocksource_of_init(void)
 
 		init_func = match->data;
 		init_func(np);
-		of_node_put(np);
 	}
 }
-- 
1.7.9.5

[PATCH 4/6] clocksource: sunxi: Stop timer from ticking before enabling interrupts

[Daniel Lezcano]

From: Marc Zyngier <marc.zyngier@arm.com>

The sun4i timer can still be ticking when we enable the interrupt.
If another timer is actually used (A7 architected timer, for example),
odds are that the interrupt will eventually fire with the event_handler
pointer being NULL.

The obvious fix it to stop the timer before registering the interrupt.

Observed and tested on sun7i (cubietruck).

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/sun4i_timer.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c
index 2fb4695..a4f6119 100644
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -179,6 +179,9 @@ static void __init sun4i_timer_init(struct device_node *node)
 	writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M),
 	       timer_base + TIMER_CTL_REG(0));
 
+	/* Make sure timer is stopped before playing with interrupts */
+	sun4i_clkevt_time_stop(0);
+
 	ret = setup_irq(irq, &sun4i_timer_irq);
 	if (ret)
 		pr_warn("failed to setup irq %d\n", irq);
-- 
1.7.9.5

[PATCH 5/6] clocksource: dw_apb_timer_of: Fix read_sched_clock

[Daniel Lezcano]

From: Dinh Nguyen <dinguyen@altera.com>

The read_sched_clock should return the ~value because the clock is a
countdown implementation. read_sched_clock() should be the same as
 __apbt_read_clocksource().

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/dw_apb_timer_of.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index 45ba8ae..b29d7cd 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -108,7 +108,7 @@ static void __init add_clocksource(struct device_node *source_timer)
 
 static u64 read_sched_clock(void)
 {
-	return __raw_readl(sched_io_base);
+	return ~__raw_readl(sched_io_base);
 }
 
 static const struct of_device_id sptimer_ids[] __initconst = {
-- 
1.7.9.5

[PATCH 6/6] clocksource: dw_apb_timer_of: Fix support for dts binding "snps, dw-apb-timer"

[Daniel Lezcano]

From: Dinh Nguyen <dinguyen@altera.com>

In commit 620f5e1cbf (dts: Rename DW APB timer compatible strings), both
"snps,dw-apb-timer-sp" and "snps,dw-apb-timer-osc" were deprecated in place
of "snps,dw-apb-timer". But the driver also needs to be udpated in order to
support this new binding "snps,dw-apb-timer".

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/dw_apb_timer_of.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index b29d7cd..2a2ea27 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -113,7 +113,6 @@ static u64 read_sched_clock(void)
 
 static const struct of_device_id sptimer_ids[] __initconst = {
 	{ .compatible = "picochip,pc3x2-rtc" },
-	{ .compatible = "snps,dw-apb-timer-sp" },
 	{ /* Sentinel */ },
 };
 
@@ -151,4 +150,6 @@ static void __init dw_apb_timer_init(struct device_node *timer)
 	num_called++;
 }
 CLOCKSOURCE_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init);
-CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer-osc", dw_apb_timer_init);
+CLOCKSOURCE_OF_DECLARE(apb_timer_osc, "snps,dw-apb-timer-osc", dw_apb_timer_init);
+CLOCKSOURCE_OF_DECLARE(apb_timer_sp, "snps,dw-apb-timer-sp", dw_apb_timer_init);
+CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer", dw_apb_timer_init);
-- 
1.7.9.5

[GIT PULL RESEND2] clocksource/clockevents fixes for 3.13

[Ingo Molnar]

* Daniel Lezcano <daniel.lezcano@linaro.org> wrote:

> 
> Hi Thomas, Ingo,
> 
> here are the fixes for 3.13 based on timers/urgent
> 
>  * Axel Lin added a missing dependency on CLKSRC_MMIO in the Kconfig
> for the time-efm32
> 
>  * Dinh Nguyen fixed read_sched_clock to return the right value and
> added the clksrc-of missing definition for the dw_apb_timer
> 
>  * Ezequiel Garcia registered the sched clock after the counter,
> thus preventing time jump in the traces for the armada-370-xp
> 
>  * Marc Zyngier stopped the timer before enabling the irq in order
> to prevent it to be fired before the clockevent is registered for
> the sunxi
> 
>  * Thierry Reding removed a of_node_put in clksrc-of because the
> reference is not held
> 
> Thanks
>   -- Daniel
> 
> ----------------------------------------------------------------
> 
> The following changes since commit 0e576acbc1d9600cf2d9b4a141a2554639959d50:
> 
>   nohz: Fix another inconsistency between CONFIG_NO_HZ=n and
> nohz=off (2013-11-29 12:23:03 +0100)
> 
> are available in the git repository at:
> 
>   git://git.linaro.org/people/daniel.lezcano/linux.git clockevents/fixes
> 
> for you to fetch changes up to 9ab4727c1d41e50b67aecde4bf11879560a3ca78:
> 
>   clocksource: dw_apb_timer_of: Fix support for dts binding
> "snps,dw-apb-timer" (2013-12-10 19:49:18 +0100)
> 
> ----------------------------------------------------------------
> Axel Lin (1):
>       clocksource: time-efm32: Select CLKSRC_MMIO
> 
> Dinh Nguyen (2):
>       clocksource: dw_apb_timer_of: Fix read_sched_clock
>       clocksource: dw_apb_timer_of: Fix support for dts binding
> "snps,dw-apb-timer"
> 
> Ezequiel Garcia (1):
>       clocksource: armada-370-xp: Register sched_clock after the
> counter reset
> 
> Marc Zyngier (1):
>       clocksource: sunxi: Stop timer from ticking before enabling
> interrupts
> 
> Thierry Reding (1):
>       clocksource: clksrc-of: Do not drop unheld reference on device node
> 
>  drivers/clocksource/Kconfig              |    1 +
>  drivers/clocksource/clksrc-of.c          |    1 -
>  drivers/clocksource/dw_apb_timer_of.c    |    7 ++++---
>  drivers/clocksource/sun4i_timer.c        |    3 +++
>  drivers/clocksource/time-armada-370-xp.c |   10 +++++-----
>  5 files changed, 13 insertions(+), 9 deletions(-)

Pulled into tip:timers/urgent, thanks a lot Daniel!

	Ingo

[PATCH 6/6] clocksource: dw_apb_timer_of: Fix support for dts binding "snps, dw-apb-timer"

[Baruch Siach]

Hi Daniel, Dinh,

On Tue, Dec 10, 2013 at 08:16:12PM +0100, Daniel Lezcano wrote:
> From: Dinh Nguyen <dinguyen@altera.com>
> 
> In commit 620f5e1cbf (dts: Rename DW APB timer compatible strings), both
> "snps,dw-apb-timer-sp" and "snps,dw-apb-timer-osc" were deprecated in place
> of "snps,dw-apb-timer". But the driver also needs to be udpated in order to
> support this new binding "snps,dw-apb-timer".
> 
> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---

I guess this (and the previous one) should also be pushed to v3.12-stable, 
isn't it?

baruch

>  drivers/clocksource/dw_apb_timer_of.c |    5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
> index b29d7cd..2a2ea27 100644
> --- a/drivers/clocksource/dw_apb_timer_of.c
> +++ b/drivers/clocksource/dw_apb_timer_of.c
> @@ -113,7 +113,6 @@ static u64 read_sched_clock(void)
>  
>  static const struct of_device_id sptimer_ids[] __initconst = {
>  	{ .compatible = "picochip,pc3x2-rtc" },
> -	{ .compatible = "snps,dw-apb-timer-sp" },
>  	{ /* Sentinel */ },
>  };
>  
> @@ -151,4 +150,6 @@ static void __init dw_apb_timer_init(struct device_node *timer)
>  	num_called++;
>  }
>  CLOCKSOURCE_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init);
> -CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer-osc", dw_apb_timer_init);
> +CLOCKSOURCE_OF_DECLARE(apb_timer_osc, "snps,dw-apb-timer-osc", dw_apb_timer_init);
> +CLOCKSOURCE_OF_DECLARE(apb_timer_sp, "snps,dw-apb-timer-sp", dw_apb_timer_init);
> +CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer", dw_apb_timer_init);
> -- 
> 1.7.9.5

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

[PATCH 6/6] clocksource: dw_apb_timer_of: Fix support for dts binding "snps, dw-apb-timer"

[Daniel Lezcano]

On 12/11/2013 06:00 AM, Baruch Siach wrote:
> Hi Daniel, Dinh,
>
> On Tue, Dec 10, 2013 at 08:16:12PM +0100, Daniel Lezcano wrote:
>> From: Dinh Nguyen <dinguyen@altera.com>
>>
>> In commit 620f5e1cbf (dts: Rename DW APB timer compatible strings), both
>> "snps,dw-apb-timer-sp" and "snps,dw-apb-timer-osc" were deprecated in place
>> of "snps,dw-apb-timer". But the driver also needs to be udpated in order to
>> support this new binding "snps,dw-apb-timer".
>>
>> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
>> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
>> ---
>
> I guess this (and the previous one) should also be pushed to v3.12-stable,
> isn't it?

Mmh, yes.

Thomas,

will you send those patches to Greg-KH ? Otherwise I am willing to 
create a -stable branch for each release to put those in and send them 
to stable@ directly.

Thanks
   -- Daniel


>>   drivers/clocksource/dw_apb_timer_of.c |    5 +++--
>>   1 file changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
>> index b29d7cd..2a2ea27 100644
>> --- a/drivers/clocksource/dw_apb_timer_of.c
>> +++ b/drivers/clocksource/dw_apb_timer_of.c
>> @@ -113,7 +113,6 @@ static u64 read_sched_clock(void)
>>
>>   static const struct of_device_id sptimer_ids[] __initconst = {
>>   	{ .compatible = "picochip,pc3x2-rtc" },
>> -	{ .compatible = "snps,dw-apb-timer-sp" },
>>   	{ /* Sentinel */ },
>>   };
>>
>> @@ -151,4 +150,6 @@ static void __init dw_apb_timer_init(struct device_node *timer)
>>   	num_called++;
>>   }
>>   CLOCKSOURCE_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init);
>> -CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer-osc", dw_apb_timer_init);
>> +CLOCKSOURCE_OF_DECLARE(apb_timer_osc, "snps,dw-apb-timer-osc", dw_apb_timer_init);
>> +CLOCKSOURCE_OF_DECLARE(apb_timer_sp, "snps,dw-apb-timer-sp", dw_apb_timer_init);
>> +CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer", dw_apb_timer_init);
>> --
>> 1.7.9.5
>


-- 
  <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

[GIT PULL RESEND2] clocksource/clockevents fixes for 3.13

[Daniel Lezcano]

On 12/10/2013 08:48 PM, Ingo Molnar wrote:

[ ... ]

>>
>>   drivers/clocksource/Kconfig              |    1 +
>>   drivers/clocksource/clksrc-of.c          |    1 -
>>   drivers/clocksource/dw_apb_timer_of.c    |    7 ++++---
>>   drivers/clocksource/sun4i_timer.c        |    3 +++
>>   drivers/clocksource/time-armada-370-xp.c |   10 +++++-----
>>   5 files changed, 13 insertions(+), 9 deletions(-)
>
> Pulled into tip:timers/urgent, thanks a lot Daniel!

Thanks to you for helping me to be a better maintainer. All you comments 
and advices were very valuable.

   -- Daniel

-- 
  <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

[GIT PULL RESEND2] clocksource/clockevents fixes for 3.13

[Ingo Molnar]

* Daniel Lezcano <daniel.lezcano@linaro.org> wrote:

> On 12/10/2013 08:48 PM, Ingo Molnar wrote:
> 
> [ ... ]
> 
> >>
> >>  drivers/clocksource/Kconfig              |    1 +
> >>  drivers/clocksource/clksrc-of.c          |    1 -
> >>  drivers/clocksource/dw_apb_timer_of.c    |    7 ++++---
> >>  drivers/clocksource/sun4i_timer.c        |    3 +++
> >>  drivers/clocksource/time-armada-370-xp.c |   10 +++++-----
> >>  5 files changed, 13 insertions(+), 9 deletions(-)
> >
> >Pulled into tip:timers/urgent, thanks a lot Daniel!
> 
> Thanks to you for helping me to be a better maintainer. All you
> comments and advices were very valuable.

You are welcome!

Thanks,

	Ingo