From: dinh.linux@gmail.com (Dinh Nguyen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 3/9] usb: gadget: s3c-hsotg: enable build for other platforms
Date: Thu, 12 Dec 2013 18:05:19 -0600 [thread overview]
Message-ID: <52AA4F3F.4070907@gmail.com> (raw)
In-Reply-To: <20131212220726.GA4205@beef>
On 12/12/13 4:07 PM, Matt Porter wrote:
> On Thu, Dec 12, 2013 at 03:51:31PM -0600, Dinh Nguyen wrote:
>> Hi Matt,
>>
>> On 12/12/13 7:26 AM, Matt Porter wrote:
>>> Remove unused Samsung-specific machine include and Kconfig
>>> dependency on S3C.
>>>
>>> Signed-off-by: Matt Porter <mporter@linaro.org>
>>> Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
>>> Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
>>> ---
>>> drivers/usb/gadget/Kconfig | 7 +++----
>>> drivers/usb/gadget/s3c-hsotg.c | 2 --
>>> 2 files changed, 3 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
>>> index a91e642..970bd1a 100644
>>> --- a/drivers/usb/gadget/Kconfig
>>> +++ b/drivers/usb/gadget/Kconfig
>>> @@ -294,11 +294,10 @@ config USB_PXA27X
>>> gadget drivers to also be dynamically linked.
>>>
>>> config USB_S3C_HSOTG
>>> - tristate "S3C HS/OtG USB Device controller"
>>> - depends on S3C_DEV_USB_HSOTG
>>> + tristate "Designware/S3C HS/OtG USB Device controller"
>>> help
>>> - The Samsung S3C64XX USB2.0 high-speed gadget controller
>>> - integrated into the S3C64XX series SoC.
>>> + The Designware USB2.0 high-speed gadget controller
>>> + integrated into the S3C64XX and BCM281xx series SoC.
>> Thanks for doing this. The SOCFPGA platform is also using this driver.
>> So perhaps a
>> more generic message here?
> Ok, I wasn't aware since I didn't see anybody else try to fix this
> driver in mainline. How about this?
>
> The Designware USB2.0 high-speed gadget controller
> integrated into many SoCS.
That looks fine to me. Yeah, I didn't realize the s3c driver was just the
Synopsys DWC2 peripheral driver until I saw drivers/staging/dwc2. I was
in process of switching over to use it and then I saw your patchset.
Thanks,
Dinh
>
> If that looks better to you I'll plan to add it in an update. I would
> like to see if we can gather a couple acks at this point or if there are
> any additional DT comments before sending another update.
>
> -Matt
>
>>>
>>> config USB_S3C2410
>>> tristate "S3C2410 USB Device Controller"
>>> diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
>>> index 33eb690..8ceb5ef 100644
>>> --- a/drivers/usb/gadget/s3c-hsotg.c
>>> +++ b/drivers/usb/gadget/s3c-hsotg.c
>>> @@ -37,8 +37,6 @@
>>> #include <linux/usb/phy.h>
>>> #include <linux/platform_data/s3c-hsotg.h>
>>>
>>> -#include <mach/map.h>
>>> -
>>> #include "s3c-hsotg.h"
>>>
>>> static const char * const s3c_hsotg_supply_names[] = {
next prev parent reply other threads:[~2013-12-13 0:05 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-12 13:26 [PATCH v5 0/9] USB Device Controller support for BCM281xx Matt Porter
2013-12-12 13:26 ` [PATCH v5 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls Matt Porter
2013-12-12 18:18 ` Felipe Balbi
2013-12-13 9:55 ` Kishon Vijay Abraham I
2013-12-12 13:26 ` [PATCH v5 2/9] staging: dwc2: update DT binding to add generic clock/phy properties Matt Porter
2013-12-12 18:19 ` Felipe Balbi
2013-12-12 13:26 ` [PATCH v5 3/9] usb: gadget: s3c-hsotg: enable build for other platforms Matt Porter
2013-12-12 21:51 ` Dinh Nguyen
2013-12-12 22:07 ` Matt Porter
2013-12-13 0:05 ` Dinh Nguyen [this message]
2013-12-12 13:26 ` [PATCH v5 4/9] usb: gadget: s3c-hsotg: add snps, dwc2 compatible string Matt Porter
2013-12-12 13:26 ` [PATCH v5 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support Matt Porter
2013-12-13 11:00 ` Kishon Vijay Abraham I
2013-12-12 13:26 ` [PATCH v5 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem Matt Porter
2013-12-13 11:02 ` Kishon Vijay Abraham I
2013-12-12 13:26 ` [PATCH v5 7/9] phy: add Broadcom Kona USB2 PHY DT binding Matt Porter
2013-12-12 13:26 ` [PATCH v5 8/9] phy: add Broadcom Kona USB2 PHY driver Matt Porter
2013-12-12 13:26 ` [PATCH v5 9/9] ARM: dts: add usb udc support to bcm281xx Matt Porter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52AA4F3F.4070907@gmail.com \
--to=dinh.linux@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).