* [PATCH V2] ARM: tegra: fix pinctrl misconfiguration on Venic2
@ 2013-12-12 22:12 Stephen Warren
2013-12-13 6:25 ` Laxman Dewangan
2013-12-13 19:55 ` Thierry Reding
0 siblings, 2 replies; 4+ messages in thread
From: Stephen Warren @ 2013-12-12 22:12 UTC (permalink / raw)
To: linux-arm-kernel
From: Stephen Warren <swarren@nvidia.com>
Other boards use PULL_NONE for their debug UART pins, and without this
change, the board doesn't accept any serial input.
Don't set the I2S port pins to tristate mode, or no audio signal will
be sent out.
Fixes: 605ae5804385 ("ARM: tegra: add default pinctrl nodes for Venice2")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
v2: Added fix for I2S port.
Laxman, can you please go through the whole pinctrl configuration for
Venice2 and make sure it's correct. Perhaps the best approach would be
to compare it against our downstream kernels for this board.
---
arch/arm/boot/dts/tegra124-venice2.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 616759c3c7e5..b31e18798be7 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -40,7 +40,7 @@
nvidia,function = "i2s1";
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
dvfs_pwm_px0 {
nvidia,pins = "dvfs_pwm_px0";
@@ -250,7 +250,7 @@
"pu3";
nvidia,function = "uarta";
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
- nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
uart2_cts_n_pj5 {
--
1.8.1.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH V2] ARM: tegra: fix pinctrl misconfiguration on Venic2
2013-12-12 22:12 [PATCH V2] ARM: tegra: fix pinctrl misconfiguration on Venic2 Stephen Warren
@ 2013-12-13 6:25 ` Laxman Dewangan
2013-12-13 16:59 ` Stephen Warren
2013-12-13 19:55 ` Thierry Reding
1 sibling, 1 reply; 4+ messages in thread
From: Laxman Dewangan @ 2013-12-13 6:25 UTC (permalink / raw)
To: linux-arm-kernel
On Friday 13 December 2013 03:42 AM, Stephen Warren wrote:
> From: Stephen Warren <swarren@nvidia.com>
>
> Other boards use PULL_NONE for their debug UART pins, and without this
> change, the board doesn't accept any serial input.
>
> Don't set the I2S port pins to tristate mode, or no audio signal will
> be sent out.
>
> Fixes: 605ae5804385 ("ARM: tegra: add default pinctrl nodes for Venice2")
> Signed-off-by: Stephen Warren <swarren@nvidia.com>
> ---
> v2: Added fix for I2S port.
>
> Laxman, can you please go through the whole pinctrl configuration for
> Venice2 and make sure it's correct. Perhaps the best approach would be
> to compare it against our downstream kernels for this board.
The patch is generated based on downstream ref platforms setting,
Let me again check with very similar board in dowsntream.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH V2] ARM: tegra: fix pinctrl misconfiguration on Venic2
2013-12-13 6:25 ` Laxman Dewangan
@ 2013-12-13 16:59 ` Stephen Warren
0 siblings, 0 replies; 4+ messages in thread
From: Stephen Warren @ 2013-12-13 16:59 UTC (permalink / raw)
To: linux-arm-kernel
On 12/12/2013 11:25 PM, Laxman Dewangan wrote:
> On Friday 13 December 2013 03:42 AM, Stephen Warren wrote:
>> From: Stephen Warren <swarren@nvidia.com>
>>
>> Other boards use PULL_NONE for their debug UART pins, and without this
>> change, the board doesn't accept any serial input.
>>
>> Don't set the I2S port pins to tristate mode, or no audio signal will
>> be sent out.
>>
>> Fixes: 605ae5804385 ("ARM: tegra: add default pinctrl nodes for Venice2")
>> Signed-off-by: Stephen Warren <swarren@nvidia.com>
>> ---
>> v2: Added fix for I2S port.
>>
>> Laxman, can you please go through the whole pinctrl configuration for
>> Venice2 and make sure it's correct. Perhaps the best approach would be
>> to compare it against our downstream kernels for this board.
>
> The patch is generated based on downstream ref platforms setting,
> Let me again check with very similar board in dowsntream.
Oh, you mean this isn't a pinctrl configuration for Venice2 then? As you
know, we do have a separate downstream kernel with full Venice2 support;
you should use that as a reference.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH V2] ARM: tegra: fix pinctrl misconfiguration on Venic2
2013-12-12 22:12 [PATCH V2] ARM: tegra: fix pinctrl misconfiguration on Venic2 Stephen Warren
2013-12-13 6:25 ` Laxman Dewangan
@ 2013-12-13 19:55 ` Thierry Reding
1 sibling, 0 replies; 4+ messages in thread
From: Thierry Reding @ 2013-12-13 19:55 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Dec 12, 2013 at 03:12:02PM -0700, Stephen Warren wrote:
> From: Stephen Warren <swarren@nvidia.com>
Just in case you ever wanted to rebase this: s/Venic2/Venice2/
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131213/05b261ad/attachment.sig>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-12-13 19:55 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-12 22:12 [PATCH V2] ARM: tegra: fix pinctrl misconfiguration on Venic2 Stephen Warren
2013-12-13 6:25 ` Laxman Dewangan
2013-12-13 16:59 ` Stephen Warren
2013-12-13 19:55 ` Thierry Reding
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).