From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/10] KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC
Date: Mon, 16 Dec 2013 11:45:21 +0000 [thread overview]
Message-ID: <52AEE7D1.6020106@arm.com> (raw)
In-Reply-To: <1386878149-13397-3-git-send-email-christoffer.dall@linaro.org>
On 12/12/13 19:55, Christoffer Dall wrote:
> Support creating the ARM VGIC device through the KVM_CREATE_DEVICE
> ioctl, which can then later be leveraged to use the
> KVM_{GET/SET}_DEVICE_ATTR, which is useful both for setting addresses in
> a more generic API than the ARM-specific one and is useful for
> save/restore of VGIC state.
>
> Adds KVM_CAP_DEVICE_CTRL to ARM capabilities.
>
> Note that we change the check for creating a VGIC from bailing out if
> any VCPUs were created, to bailing out if any VCPUs were ever run. This
> is an important distinction that shouldn't break anything, but allows
> creating the VGIC after the VCPUs have been created.
>
> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
> ---
> Changelog[v4]:
> - Rename kvm_arm_vgic_ops to kvm_arm_vgic_v2_ops
> - Add comment to kvm_vgic_create about locking vcpu->mutex
>
> Changelog[v3]:
> - Prevent race in kvm_vgic_create by trying to take all the vcpu
> locks before creating the vgic.
>
> Changelog[v2]:
> - None
>
> Documentation/virtual/kvm/devices/arm-vgic.txt | 10 ++++
> arch/arm/kvm/arm.c | 1 +
> include/linux/kvm_host.h | 1 +
> include/uapi/linux/kvm.h | 1 +
> virt/kvm/arm/vgic.c | 63 +++++++++++++++++++++++++-
> virt/kvm/kvm_main.c | 6 ++-
> 6 files changed, 79 insertions(+), 3 deletions(-)
> create mode 100644 Documentation/virtual/kvm/devices/arm-vgic.txt
>
> diff --git a/Documentation/virtual/kvm/devices/arm-vgic.txt b/Documentation/virtual/kvm/devices/arm-vgic.txt
> new file mode 100644
> index 0000000..38f27f7
> --- /dev/null
> +++ b/Documentation/virtual/kvm/devices/arm-vgic.txt
> @@ -0,0 +1,10 @@
> +ARM Virtual Generic Interrupt Controller (VGIC)
> +===============================================
> +
> +Device types supported:
> + KVM_DEV_TYPE_ARM_VGIC_V2 ARM Generic Interrupt Controller v2.0
> +
> +Only one VGIC instance may be instantiated through either this API or the
> +legacy KVM_CREATE_IRQCHIP api. The created VGIC will act as the VM interrupt
> +controller, requiring emulated user-space devices to inject interrupts to the
> +VGIC instead of directly to CPUs.
> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index c9fe9d7..cc7c41a 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c
> @@ -190,6 +190,7 @@ int kvm_dev_ioctl_check_extension(long ext)
> case KVM_CAP_IRQCHIP:
> r = vgic_present;
> break;
> + case KVM_CAP_DEVICE_CTRL:
> case KVM_CAP_USER_MEMORY:
> case KVM_CAP_SYNC_MMU:
> case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
> diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
> index 9523d2a..521dd76 100644
> --- a/include/linux/kvm_host.h
> +++ b/include/linux/kvm_host.h
> @@ -1076,6 +1076,7 @@ struct kvm_device *kvm_device_from_filp(struct file *filp);
> extern struct kvm_device_ops kvm_mpic_ops;
> extern struct kvm_device_ops kvm_xics_ops;
> extern struct kvm_device_ops kvm_vfio_ops;
> +extern struct kvm_device_ops kvm_arm_vgic_v2_ops;
>
> #ifdef CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT
>
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index 902f124..b647c29 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -853,6 +853,7 @@ struct kvm_device_attr {
> #define KVM_DEV_VFIO_GROUP 1
> #define KVM_DEV_VFIO_GROUP_ADD 1
> #define KVM_DEV_VFIO_GROUP_DEL 2
> +#define KVM_DEV_TYPE_ARM_VGIC_V2 5
>
> /*
> * ioctls for VM fds
> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> index 5e9df47..b15d6c1 100644
> --- a/virt/kvm/arm/vgic.c
> +++ b/virt/kvm/arm/vgic.c
> @@ -1433,20 +1433,45 @@ out:
>
> int kvm_vgic_create(struct kvm *kvm)
> {
> - int ret = 0;
> + int i, vcpu_lock_idx = -1, ret = 0;
> + struct kvm_vcpu *vcpu;
>
> mutex_lock(&kvm->lock);
>
> - if (atomic_read(&kvm->online_vcpus) || kvm->arch.vgic.vctrl_base) {
> + if (kvm->arch.vgic.vctrl_base) {
> ret = -EEXIST;
> goto out;
> }
>
> + /*
> + * Any time a vcpu is run, vcpu_load is called which tries to grab the
> + * vcpu->mutex. By grabbing the vcpu->mutex of all VCPUs we ensure
> + * that no other VCPUs are run while we create the vgic.
> + */
> + kvm_for_each_vcpu(i, vcpu, kvm) {
> + if (!mutex_trylock(&vcpu->mutex))
> + goto out_unlock;
> + vcpu_lock_idx = i;
> + }
> +
> + kvm_for_each_vcpu(i, vcpu, kvm) {
> + if (vcpu->arch.has_run_once) {
> + ret = -EBUSY;
> + goto out_unlock;
> + }
> + }
> +
> spin_lock_init(&kvm->arch.vgic.lock);
> kvm->arch.vgic.vctrl_base = vgic_vctrl_base;
> kvm->arch.vgic.vgic_dist_base = VGIC_ADDR_UNDEF;
> kvm->arch.vgic.vgic_cpu_base = VGIC_ADDR_UNDEF;
>
> +out_unlock:
> + for (; vcpu_lock_idx >= 0; vcpu_lock_idx--) {
> + vcpu = kvm_get_vcpu(kvm, vcpu_lock_idx);
> + mutex_unlock(&vcpu->mutex);
> + }
> +
> out:
> mutex_unlock(&kvm->lock);
> return ret;
> @@ -1510,3 +1535,37 @@ int kvm_vgic_set_addr(struct kvm *kvm, unsigned long type, u64 addr)
> mutex_unlock(&kvm->lock);
> return r;
> }
> +
> +static int vgic_set_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
> +{
> + return -ENXIO;
> +}
> +
> +static int vgic_get_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
> +{
> + return -ENXIO;
> +}
> +
> +static int vgic_has_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
> +{
> + return -ENXIO;
> +}
> +
> +static void vgic_destroy(struct kvm_device *dev)
> +{
> + kfree(dev);
> +}
> +
> +static int vgic_create(struct kvm_device *dev, u32 type)
> +{
> + return kvm_vgic_create(dev->kvm);
> +}
> +
> +struct kvm_device_ops kvm_arm_vgic_v2_ops = {
> + .name = "kvm-arm-vgic",
> + .create = vgic_create,
> + .destroy = vgic_destroy,
> + .set_attr = vgic_set_attr,
> + .get_attr = vgic_get_attr,
> + .has_attr = vgic_has_attr,
> +};
> diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
> index a0aa84b..954a0ba 100644
> --- a/virt/kvm/kvm_main.c
> +++ b/virt/kvm/kvm_main.c
> @@ -2279,7 +2279,11 @@ static int kvm_ioctl_create_device(struct kvm *kvm,
> #ifdef CONFIG_KVM_VFIO
> case KVM_DEV_TYPE_VFIO:
> ops = &kvm_vfio_ops;
> - break;
I think you just broke VFIO.
> +#endif
> +#ifdef CONFIG_KVM_ARM_VGIC
> + case KVM_DEV_TYPE_ARM_VGIC_V2:
> + ops = &kvm_arm_vgic_v2_ops;
> + break;
Indentation?
> #endif
> default:
> return -ENODEV;
>
Provided that you fix the above:
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
M.
--
Jazz is not dead. It just smells funny...
next prev parent reply other threads:[~2013-12-16 11:45 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-12 19:55 [PATCH 00/10] Support VGIC save/restore using device control API Christoffer Dall
2013-12-12 19:55 ` [PATCH 01/10] ARM: KVM: Allow creating the VGIC after VCPUs Christoffer Dall
2013-12-12 19:55 ` [PATCH 02/10] KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC Christoffer Dall
2013-12-16 11:45 ` Marc Zyngier [this message]
2013-12-16 17:08 ` Christoffer Dall
2013-12-12 19:55 ` [PATCH 03/10] KVM: arm-vgic: Set base addr through device API Christoffer Dall
2013-12-16 11:46 ` Marc Zyngier
2013-12-12 19:55 ` [PATCH 04/10] irqchip: arm-gic: Define additional MMIO offsets and masks Christoffer Dall
2013-12-12 19:55 ` [PATCH 05/10] KVM: arm-vgic: Make vgic mmio functions more generic Christoffer Dall
2013-12-12 19:55 ` [PATCH 06/10] arm/arm64: kvm: Set vcpu->cpu to -1 on vcpu_put Christoffer Dall
2013-12-16 11:49 ` Marc Zyngier
2013-12-12 19:55 ` [PATCH 07/10] KVM: arm-vgic: Add vgic reg access from dev attr Christoffer Dall
2013-12-16 11:51 ` Marc Zyngier
2013-12-12 19:55 ` [PATCH 08/10] KVM: arm-vgic: Support unqueueing of LRs to the dist Christoffer Dall
2013-12-16 12:53 ` Marc Zyngier
2013-12-16 17:07 ` Christoffer Dall
2013-12-12 19:55 ` [PATCH 09/10] KVM: arm-vgic: Add GICD_SPENDSGIR and GICD_CPENDSGIR handlers Christoffer Dall
2013-12-12 19:55 ` [PATCH 10/10] KVM: arm-vgic: Support CPU interface reg access Christoffer Dall
2013-12-13 17:21 ` [PATCH 00/10] Support VGIC save/restore using device control API Christoffer Dall
2013-12-16 12:56 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52AEE7D1.6020106@arm.com \
--to=marc.zyngier@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).