From: dinh.linux@gmail.com (Dinh Nguyen)
To: linux-arm-kernel@lists.infradead.org
Subject: [RESEND LIST PATCHv7 1/4] clk: socfpga: Add a clk-phase property to the "altr, socfpga-gate-clk"
Date: Tue, 17 Dec 2013 22:06:03 -0600 [thread overview]
Message-ID: <52B11F2B.5000507@gmail.com> (raw)
In-Reply-To: <20131217235557.23538.22672@quantum>
Hi Mike,
On 12/17/13 5:55 PM, Mike Turquette wrote:
> Quoting Dinh Nguyen (2013-12-17 05:44:47)
>> Hi Zhangfei,
>>
>> On 12/17/13 1:46 AM, zhangfei wrote:
>>>
>>> On 12/17/2013 01:04 AM, dinguyen at altera.com wrote:
>>>> From: Dinh Nguyen <dinguyen@altera.com>
>>>> +static int socfpga_clk_prepare(struct clk_hw *hwclk)
>>>> +{
>>>> + struct socfpga_clk *socfpgaclk = to_socfpga_clk(hwclk);
>>>> + struct regmap *sys_mgr_base_addr;
>>>> + u32 hs_timing;
>>>> +
>>>> + if (socfpgaclk->clk_phase[0] || socfpgaclk->clk_phase[1]) {
>>>> + sys_mgr_base_addr =
>>>> syscon_regmap_lookup_by_compatible("altr,sys-mgr");
>>>> + if (IS_ERR(sys_mgr_base_addr)) {
>>>> + pr_err("%s: failed to find altr,sys-mgr regmap!\n",
>>>> __func__);
>>>> + return -EINVAL;
>>>> + }
>>>> + hs_timing = SYSMGR_SDMMC_CTRL_SET(socfpgaclk->clk_phase[0],
>>>> + socfpgaclk->clk_phase[1]);
>>>> + regmap_write(sys_mgr_base_addr, SYSMGR_SDMMCGRP_CTRL_OFFSET,
>>>> + hs_timing);
>>>> + }
>>>> + return 0;
>>>> +}
>>> So reusing gate-clk here and check the node of "altr,sys-mgr".
>>> I think it is good and simple.
>>> Also can define new clock combined with node "altr,sys-mgr" with
>>> parent of sdmmc_clk.
>>>
>>> Thanks for the update, it is fine to me.
>> Thanks, can I get an Ack from you for this version?
> Dinh,
>
> Will you be spinning another version of this patch? If not I can go
> ahead and take this into clk-next.
If you are OK with the patch, then yes, can you please apply it to clk-next?
Thanks,
Dinh
>
> Regards,
> Mike
>
>> Thanks,
>> Dinh
>>>> +
>>>> static struct clk_ops gateclk_ops = {
>>>> + .prepare = socfpga_clk_prepare,
>>>> .recalc_rate = socfpga_clk_recalc_rate,
>>>> .get_parent = socfpga_clk_get_parent,
>>>> .set_parent = socfpga_clk_set_parent,
>>>> @@ -254,6 +283,7 @@ static void __init socfpga_gate_clk_init(struct
>>>> device_node *node,
>>>> {
>>>> u32 clk_gate[2];
>>>> u32 div_reg[3];
>>>> + u32 clk_phase[2];
>>>> u32 fixed_div;
>>>> struct clk *clk;
>>>> struct socfpga_clk *socfpga_clk;
>>>> @@ -294,6 +324,12 @@ static void __init socfpga_gate_clk_init(struct
>>>> device_node *node,
>>>> socfpga_clk->div_reg = 0;
>>>> }
>>>>
>>>> + rc = of_property_read_u32_array(node, "clk-phase", clk_phase, 2);
>>>> + if (!rc) {
>>>> + socfpga_clk->clk_phase[0] = clk_phase[0];
>>>> + socfpga_clk->clk_phase[1] = clk_phase[1];
>>>> + }
>>>> +
>>>> of_property_read_string(node, "clock-output-names", &clk_name);
>>>>
>>>> init.name = clk_name;
>>>>
next prev parent reply other threads:[~2013-12-18 4:06 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-16 17:04 [RESEND LIST PATCHv7 0/4] socfpga: Enable SD/MMC support dinguyen at altera.com
2013-12-16 17:04 ` [RESEND LIST PATCHv7 1/4] clk: socfpga: Add a clk-phase property to the "altr, socfpga-gate-clk" dinguyen at altera.com
2013-12-17 7:46 ` [RESEND LIST PATCHv7 1/4] clk: socfpga: Add a clk-phase property to the "altr,socfpga-gate-clk" zhangfei
2013-12-17 13:44 ` Dinh Nguyen
2013-12-17 14:47 ` zhangfei
2013-12-17 23:55 ` [RESEND LIST PATCHv7 1/4] clk: socfpga: Add a clk-phase property to the "altr, socfpga-gate-clk" Mike Turquette
2013-12-18 4:06 ` Dinh Nguyen [this message]
2013-12-18 20:56 ` Mike Turquette
2013-12-18 21:21 ` Arnd Bergmann
2013-12-19 4:04 ` Dinh Nguyen
2013-12-19 5:50 ` Arnd Bergmann
2013-12-16 17:04 ` [RESEND LIST PATCHv7 2/4] dts: socfpga: Add support for SD/MMC on the SOCFPGA platform dinguyen at altera.com
2013-12-16 17:04 ` [RESEND LIST PATCHv7 3/4] mmc: dw_mmc-socfpga: Remove the SOCFPGA specific platform for dw_mmc dinguyen at altera.com
2013-12-16 17:04 ` [RESEND LIST PATCHv7 4/4] ARM: socfpga_defconfig: enable SD/MMC support dinguyen at altera.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52B11F2B.5000507@gmail.com \
--to=dinh.linux@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).