[PATCH 2/5] arm: shmobile: r7s72100: add i2c clocks

[sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)]

Hello.

On 18-12-2013 17:49, Simon Horman wrote:

>>>>>> @@ -173,6 +179,10 @@ static struct clk_lookup lookups[] = {
>>>>>>   	CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]),

>>>>>>   	/* ICK */
>>>>>> +	CLKDEV_DEV_ID("fcfee000.i2c", &mstp_clks[MSTP97]),
>>>>>> +	CLKDEV_DEV_ID("fcfee400.i2c", &mstp_clks[MSTP96]),
>>>>>> +	CLKDEV_DEV_ID("fcfee800.i2c", &mstp_clks[MSTP95]),
>>>>>> +	CLKDEV_DEV_ID("fcfeec00.i2c", &mstp_clks[MSTP94]),

>>>>>     These belong to some other place, the group marked by /* ICK */
>>>>> is only for CLKDEV_ICK_ID().

>>>> So, I'll create a /* DEV */ prefix?

>>>     I really don't know. Other places have /* MSTP */ comment in this
>>> case despite all clocks, CLKDEV_DEV_ID() and CLKDEV_ICK_ID() are
>>> really MSTP clocks. I considered the idea of separating
>>> CLKDEV_ICK_ID() under /* ICK */ comment silly from the very start
>>> but Simon didn't listen to me.

>> I am puzzled, too. ICK is a type of registration and not a clock domain.
>> Also, there is 'mtu2_fck' which is under ICK as well as MSTP? Looks
>> wrong. From what I understand now, removing the /* ICK */ comment would
>> be easiest and proper?

> I'm not sure that I really understand what all the fuss is about.

> As I understand things the convention that prevails for
> MSTP clocks under mach-shmobile is as follows:

> 1. Clocks not registered by CLKDEV_ICK_ID() are grouped together
>     under /* MSTP */ followed by:
> 2. Clocks registered using CLKDEV_ICK_ID() are grouped together
>     under /* ICK */

> I am unsure of the historical reason for this

    Recent patches by Morimoto-san.

> but it does seem to be consistent.

    No, it doesn't. These comments are *clearly* not consistent and should be 
removed at least.

WBR, Sergei