From mboxrd@z Thu Jan  1 00:00:00 1970
From: ben.dooks@codethink.co.uk (Ben Dooks)
Date: Wed, 08 Jan 2014 12:23:42 +0000
Subject: [PATCH 3/4] thermal: rcar: Add missing clock handling
In-Reply-To: <1389121036-3555-4-git-send-email-geert@linux-m68k.org>
References: <1389121036-3555-1-git-send-email-geert@linux-m68k.org>
 <1389121036-3555-4-git-send-email-geert@linux-m68k.org>
Message-ID: <52CD434E.6030906@codethink.co.uk>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 07/01/14 18:57, Geert Uytterhoeven wrote:
> From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
>
> When using DT to instantiate the rcar-thermal device, it prints the
> following error:
>
>      rcar_thermal e61f0000.thermal: thermal sensor was broken
>
> Explicitly request and enable the thermal clock to fix this.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
> ---
>   drivers/thermal/rcar_thermal.c |   40 +++++++++++++++++++++++++++++++++-------
>   1 file changed, 33 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
> index 88f92e1a9944..a5629500723a 100644
> --- a/drivers/thermal/rcar_thermal.c
> +++ b/drivers/thermal/rcar_thermal.c
> @@ -17,6 +17,7 @@
>    *  with this program; if not, write to the Free Software Foundation, Inc.,
>    *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
>    */
> +#include <linux/clk.h>
>   #include <linux/delay.h>
>   #include <linux/err.h>
>   #include <linux/irq.h>
> @@ -53,6 +54,7 @@ struct rcar_thermal_common {
>   	struct device *dev;
>   	struct list_head head;
>   	spinlock_t lock;
> +	struct clk *clk;
>   };
>
>   struct rcar_thermal_priv {
> @@ -378,23 +380,38 @@ static int rcar_thermal_probe(struct platform_device *pdev)
>   	spin_lock_init(&common->lock);
>   	common->dev = dev;
>
> +	common->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(common->clk)) {
> +		dev_err(&pdev->dev, "cannot get clock\n");
> +		return PTR_ERR(common->clk);
> +	}
> +
> +	ret = clk_prepare(common->clk);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "unable to prepare clock\n");
> +		return ret;
> +	}
> +
> +	clk_enable(common->clk);
> +
>   	pm_runtime_enable(dev);
>   	pm_runtime_get_sync(dev);
>
>   	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
>   	if (irq) {
> -		int ret;
> +		int ret2;
>
>   		/*
>   		 * platform has IRQ support.
>   		 * Then, drier use common register
>   		 */
>
> -		ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0,
> -				       dev_name(dev), common);
> -		if (ret) {
> +		ret2 = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0,
> +					dev_name(dev), common);
> +		if (ret2) {
>   			dev_err(dev, "irq request failed\n ");
> -			return ret;
> +			ret = ret2;
> +			goto error_unpm;
>   		}

I'd suggest not renaming ret2 and just use the original ret.


-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius