* [PATCH v3] extcon: gpio: Add power resume support
@ 2014-01-07 4:56 RongJun Ying
2014-01-07 6:07 ` Chanwoo Choi
2014-01-07 6:09 ` Chanwoo Choi
0 siblings, 2 replies; 6+ messages in thread
From: RongJun Ying @ 2014-01-07 4:56 UTC (permalink / raw)
To: linux-arm-kernel
From: Rongjun Ying <rongjun.ying@csr.com>
When system on the suspend state, Some SoC can't get gpio interrupt.
After system resume, need send extcon uevent to userspace.
Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
Reviewed-by: Barry Song <Baohua.Song@csr.com>
---
-v3:
'check_on_resume' instead of 'load_sleep_irq' as Chanwoo Choi's proposal.
drivers/extcon/extcon-gpio.c | 20 ++++++++++++++++++++
include/linux/extcon/extcon-gpio.h | 1 +
2 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 7e0dff5..fde52c1 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -40,6 +40,7 @@ struct gpio_extcon_data {
int irq;
struct delayed_work work;
unsigned long debounce_jiffies;
+ bool check_on_resume;
};
static void gpio_extcon_work(struct work_struct *work)
@@ -103,6 +104,7 @@ static int gpio_extcon_probe(struct platform_device *pdev)
extcon_data->gpio_active_low = pdata->gpio_active_low;
extcon_data->state_on = pdata->state_on;
extcon_data->state_off = pdata->state_off;
+ extcon_data->check_on_resume = pdata->check_on_resume;
if (pdata->state_on && pdata->state_off)
extcon_data->edev.print_state = extcon_gpio_print_state;
if (pdata->debounce) {
@@ -159,12 +161,30 @@ static int gpio_extcon_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int gpio_extcon_resume(struct device *dev)
+{
+ struct gpio_extcon_data *extcon_data;
+
+ extcon_data = dev_get_drvdata(dev);
+ if (extcon_data->check_on_resume)
+ queue_delayed_work(system_power_efficient_wq,
+ &extcon_data->work, extcon_data->debounce_jiffies);
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops gpio_extcon_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(NULL, gpio_extcon_resume)
+};
+
static struct platform_driver gpio_extcon_driver = {
.probe = gpio_extcon_probe,
.remove = gpio_extcon_remove,
.driver = {
.name = "extcon-gpio",
.owner = THIS_MODULE,
+ .pm = &gpio_extcon_pm_ops,
},
};
diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h
index 4195810..c7f0c3e 100644
--- a/include/linux/extcon/extcon-gpio.h
+++ b/include/linux/extcon/extcon-gpio.h
@@ -51,6 +51,7 @@ struct gpio_extcon_platform_data {
/* if NULL, "0" or "1" will be printed */
const char *state_on;
const char *state_off;
+ bool check_on_resume;
};
#endif /* __EXTCON_GPIO_H__ */
--
1.7.5.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3] extcon: gpio: Add power resume support
2014-01-07 4:56 [PATCH v3] extcon: gpio: Add power resume support RongJun Ying
@ 2014-01-07 6:07 ` Chanwoo Choi
2014-01-07 9:48 ` Rongjun Ying
2014-01-07 6:09 ` Chanwoo Choi
1 sibling, 1 reply; 6+ messages in thread
From: Chanwoo Choi @ 2014-01-07 6:07 UTC (permalink / raw)
To: linux-arm-kernel
This patch has conflict as following:
You have to implement extcon patch based mainline extcon-next branch.
Applying: extcon: gpio: Add power resume support
error: patch failed: drivers/extcon/extcon-gpio.c:103
error: drivers/extcon/extcon-gpio.c: patch does not apply
Patch failed at 0001 extcon: gpio: Add power resume support
The copy of the patch that failed is found in:
/home/cwchoi00/kernel/git.kernel/extcon/.git/rebase-apply/patch
When you have resolved this problem, run "git am --resolved".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
This time, I will manually apply this patch on extcon branch.
Thanks,
Chanwoo Choi
On 01/07/2014 01:56 PM, RongJun Ying wrote:
> From: Rongjun Ying <rongjun.ying@csr.com>
>
> When system on the suspend state, Some SoC can't get gpio interrupt.
> After system resume, need send extcon uevent to userspace.
>
> Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
> Reviewed-by: Barry Song <Baohua.Song@csr.com>
> ---
> -v3:
> 'check_on_resume' instead of 'load_sleep_irq' as Chanwoo Choi's proposal.
>
> drivers/extcon/extcon-gpio.c | 20 ++++++++++++++++++++
> include/linux/extcon/extcon-gpio.h | 1 +
> 2 files changed, 21 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
> index 7e0dff5..fde52c1 100644
> --- a/drivers/extcon/extcon-gpio.c
> +++ b/drivers/extcon/extcon-gpio.c
> @@ -40,6 +40,7 @@ struct gpio_extcon_data {
> int irq;
> struct delayed_work work;
> unsigned long debounce_jiffies;
> + bool check_on_resume;
> };
>
> static void gpio_extcon_work(struct work_struct *work)
> @@ -103,6 +104,7 @@ static int gpio_extcon_probe(struct platform_device *pdev)
> extcon_data->gpio_active_low = pdata->gpio_active_low;
> extcon_data->state_on = pdata->state_on;
> extcon_data->state_off = pdata->state_off;
> + extcon_data->check_on_resume = pdata->check_on_resume;
> if (pdata->state_on && pdata->state_off)
> extcon_data->edev.print_state = extcon_gpio_print_state;
> if (pdata->debounce) {
> @@ -159,12 +161,30 @@ static int gpio_extcon_remove(struct platform_device *pdev)
> return 0;
> }
>
> +#ifdef CONFIG_PM_SLEEP
> +static int gpio_extcon_resume(struct device *dev)
> +{
> + struct gpio_extcon_data *extcon_data;
> +
> + extcon_data = dev_get_drvdata(dev);
> + if (extcon_data->check_on_resume)
> + queue_delayed_work(system_power_efficient_wq,
> + &extcon_data->work, extcon_data->debounce_jiffies);
> + return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops gpio_extcon_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(NULL, gpio_extcon_resume)
> +};
> +
> static struct platform_driver gpio_extcon_driver = {
> .probe = gpio_extcon_probe,
> .remove = gpio_extcon_remove,
> .driver = {
> .name = "extcon-gpio",
> .owner = THIS_MODULE,
> + .pm = &gpio_extcon_pm_ops,
> },
> };
>
> diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h
> index 4195810..c7f0c3e 100644
> --- a/include/linux/extcon/extcon-gpio.h
> +++ b/include/linux/extcon/extcon-gpio.h
> @@ -51,6 +51,7 @@ struct gpio_extcon_platform_data {
> /* if NULL, "0" or "1" will be printed */
> const char *state_on;
> const char *state_off;
> + bool check_on_resume;
> };
>
> #endif /* __EXTCON_GPIO_H__ */
> --
> 1.7.5.4
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v3] extcon: gpio: Add power resume support
2014-01-07 4:56 [PATCH v3] extcon: gpio: Add power resume support RongJun Ying
2014-01-07 6:07 ` Chanwoo Choi
@ 2014-01-07 6:09 ` Chanwoo Choi
2014-01-07 9:02 ` Rongjun Ying
1 sibling, 1 reply; 6+ messages in thread
From: Chanwoo Choi @ 2014-01-07 6:09 UTC (permalink / raw)
To: linux-arm-kernel
Hi RongJun,
On 01/07/2014 01:56 PM, RongJun Ying wrote:
> From: Rongjun Ying <rongjun.ying@csr.com>
>
> When system on the suspend state, Some SoC can't get gpio interrupt.
> After system resume, need send extcon uevent to userspace.
>
> Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
> Reviewed-by: Barry Song <Baohua.Song@csr.com>
> ---
> -v3:
> 'check_on_resume' instead of 'load_sleep_irq' as Chanwoo Choi's proposal.
>
> drivers/extcon/extcon-gpio.c | 20 ++++++++++++++++++++
> include/linux/extcon/extcon-gpio.h | 1 +
> 2 files changed, 21 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
> index 7e0dff5..fde52c1 100644
> --- a/drivers/extcon/extcon-gpio.c
> +++ b/drivers/extcon/extcon-gpio.c
> @@ -40,6 +40,7 @@ struct gpio_extcon_data {
> int irq;
> struct delayed_work work;
> unsigned long debounce_jiffies;
> + bool check_on_resume;
> };
>
> static void gpio_extcon_work(struct work_struct *work)
> @@ -103,6 +104,7 @@ static int gpio_extcon_probe(struct platform_device *pdev)
> extcon_data->gpio_active_low = pdata->gpio_active_low;
> extcon_data->state_on = pdata->state_on;
> extcon_data->state_off = pdata->state_off;
> + extcon_data->check_on_resume = pdata->check_on_resume;
> if (pdata->state_on && pdata->state_off)
> extcon_data->edev.print_state = extcon_gpio_print_state;
> if (pdata->debounce) {
> @@ -159,12 +161,30 @@ static int gpio_extcon_remove(struct platform_device *pdev)
> return 0;
> }
>
> +#ifdef CONFIG_PM_SLEEP
> +static int gpio_extcon_resume(struct device *dev)
> +{
> + struct gpio_extcon_data *extcon_data;
> +
> + extcon_data = dev_get_drvdata(dev);
> + if (extcon_data->check_on_resume)
> + queue_delayed_work(system_power_efficient_wq,
> + &extcon_data->work, extcon_data->debounce_jiffies);
> + return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops gpio_extcon_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(NULL, gpio_extcon_resume)
If CONFIG_PM_SLEEP is undefined, gpio_extcon_pm_ops cannot find gpio_extcon_resume function.
You should define dummy function for gpio_extcon_resume function.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v3] extcon: gpio: Add power resume support
2014-01-07 6:09 ` Chanwoo Choi
@ 2014-01-07 9:02 ` Rongjun Ying
2014-01-09 0:54 ` Chanwoo Choi
0 siblings, 1 reply; 6+ messages in thread
From: Rongjun Ying @ 2014-01-07 9:02 UTC (permalink / raw)
To: linux-arm-kernel
> -----Original Message-----
> From: Chanwoo Choi [mailto:cw00.choi at samsung.com]
> Sent: Tuesday, January 07, 2014 2:09 PM
> To: RongJun Ying
> Cc: MyungJoo Ham; Barry Song; linux-arm-kernel at lists.infradead.org;
> linux-kernel at vger.kernel.org; DL-SHA-WorkGroupLinux; Rongjun Ying
> Subject: Re: [PATCH v3] extcon: gpio: Add power resume support
>
> Hi RongJun,
>
> On 01/07/2014 01:56 PM, RongJun Ying wrote:
> > From: Rongjun Ying <rongjun.ying@csr.com>
> >
> > When system on the suspend state, Some SoC can't get gpio interrupt.
> > After system resume, need send extcon uevent to userspace.
> >
> > Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
> > Reviewed-by: Barry Song <Baohua.Song@csr.com>
> > ---
> > -v3:
> > 'check_on_resume' instead of 'load_sleep_irq' as Chanwoo Choi's
> proposal.
> >
> > drivers/extcon/extcon-gpio.c | 20 ++++++++++++++++++++
> > include/linux/extcon/extcon-gpio.h | 1 +
> > 2 files changed, 21 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/extcon/extcon-gpio.c
> > b/drivers/extcon/extcon-gpio.c index 7e0dff5..fde52c1 100644
> > --- a/drivers/extcon/extcon-gpio.c
> > +++ b/drivers/extcon/extcon-gpio.c
> > @@ -40,6 +40,7 @@ struct gpio_extcon_data {
> > int irq;
> > struct delayed_work work;
> > unsigned long debounce_jiffies;
> > + bool check_on_resume;
> > };
> >
> > static void gpio_extcon_work(struct work_struct *work) @@ -103,6
> > +104,7 @@ static int gpio_extcon_probe(struct platform_device *pdev)
> > extcon_data->gpio_active_low = pdata->gpio_active_low;
> > extcon_data->state_on = pdata->state_on;
> > extcon_data->state_off = pdata->state_off;
> > + extcon_data->check_on_resume = pdata->check_on_resume;
> > if (pdata->state_on && pdata->state_off)
> > extcon_data->edev.print_state = extcon_gpio_print_state;
> > if (pdata->debounce) {
> > @@ -159,12 +161,30 @@ static int gpio_extcon_remove(struct
> platform_device *pdev)
> > return 0;
> > }
> >
> > +#ifdef CONFIG_PM_SLEEP
> > +static int gpio_extcon_resume(struct device *dev) {
> > + struct gpio_extcon_data *extcon_data;
> > +
> > + extcon_data = dev_get_drvdata(dev);
> > + if (extcon_data->check_on_resume)
> > + queue_delayed_work(system_power_efficient_wq,
> > + &extcon_data->work, extcon_data->debounce_jiffies);
> > + return 0;
> > +}
> > +#endif
> > +
> > +static const struct dev_pm_ops gpio_extcon_pm_ops = {
> > + SET_SYSTEM_SLEEP_PM_OPS(NULL, gpio_extcon_resume)
>
> If CONFIG_PM_SLEEP is undefined, gpio_extcon_pm_ops cannot find
> gpio_extcon_resume function.
> You should define dummy function for gpio_extcon_resume function.
>
>
In the include/Linux/pm.h
If CONFIG_PM_SLEEP is undefined, the SET_SYSTEM_SLEEP_PM_OPS macro is bypassed.
#ifdef CONFIG_PM_SLEEP
#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
.suspend = suspend_fn, \
.resume = resume_fn, \
.freeze = suspend_fn, \
.thaw = resume_fn, \
.poweroff = suspend_fn, \
.restore = resume_fn,
#else
#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
#endif
>
>
> To report this email as spam click
> https://www.mailcontrol.com/sr/MZbqvYs5QwJvpeaetUwhCQ==
> UfkIuR0P8QH1DW7C+lVo3569nqreWejYcysfmF8UmgH1OQ== .
Member of the CSR plc group of companies. CSR plc registered in England and Wales, registered number 4187346, registered office Churchill House, Cambridge Business Park, Cowley Road, Cambridge, CB4 0WZ, United Kingdom
More information can be found at www.csr.com. Keep up to date with CSR on our technical blog, www.csr.com/blog, CSR people blog, www.csr.com/people, YouTube, www.youtube.com/user/CSRplc, Facebook, www.facebook.com/pages/CSR/191038434253534, or follow us on Twitter at www.twitter.com/CSR_plc.
New for 2014, you can now access the wide range of products powered by aptX at www.aptx.com.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v3] extcon: gpio: Add power resume support
2014-01-07 6:07 ` Chanwoo Choi
@ 2014-01-07 9:48 ` Rongjun Ying
0 siblings, 0 replies; 6+ messages in thread
From: Rongjun Ying @ 2014-01-07 9:48 UTC (permalink / raw)
To: linux-arm-kernel
> -----Original Message-----
> From: Chanwoo Choi [mailto:cw00.choi at samsung.com]
> Sent: Tuesday, January 07, 2014 2:07 PM
> To: RongJun Ying
> Cc: MyungJoo Ham; Barry Song; linux-arm-kernel at lists.infradead.org;
> linux-kernel at vger.kernel.org; DL-SHA-WorkGroupLinux; Rongjun Ying
> Subject: Re: [PATCH v3] extcon: gpio: Add power resume support
>
> This patch has conflict as following:
> You have to implement extcon patch based mainline extcon-next branch.
>
> Applying: extcon: gpio: Add power resume support
> error: patch failed: drivers/extcon/extcon-gpio.c:103
> error: drivers/extcon/extcon-gpio.c: patch does not apply Patch failed
> at 0001 extcon: gpio: Add power resume support The copy of the patch
> that failed is found in:
> /home/cwchoi00/kernel/git.kernel/extcon/.git/rebase-apply/patch
> When you have resolved this problem, run "git am --resolved".
> If you prefer to skip this patch, run "git am --skip" instead.
> To restore the original branch and stop patching, run "git am --abort".
>
> This time, I will manually apply this patch on extcon branch.
>
> Thanks,
> Chanwoo Choi
>
Thank you.
RongJun Ying
> On 01/07/2014 01:56 PM, RongJun Ying wrote:
> > From: Rongjun Ying <rongjun.ying@csr.com>
> >
> > When system on the suspend state, Some SoC can't get gpio interrupt.
> > After system resume, need send extcon uevent to userspace.
> >
> > Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
> > Reviewed-by: Barry Song <Baohua.Song@csr.com>
> > ---
> > -v3:
> > 'check_on_resume' instead of 'load_sleep_irq' as Chanwoo Choi's
> proposal.
> >
> > drivers/extcon/extcon-gpio.c | 20 ++++++++++++++++++++
> > include/linux/extcon/extcon-gpio.h | 1 +
> > 2 files changed, 21 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/extcon/extcon-gpio.c
> > b/drivers/extcon/extcon-gpio.c index 7e0dff5..fde52c1 100644
> > --- a/drivers/extcon/extcon-gpio.c
> > +++ b/drivers/extcon/extcon-gpio.c
> > @@ -40,6 +40,7 @@ struct gpio_extcon_data {
> > int irq;
> > struct delayed_work work;
> > unsigned long debounce_jiffies;
> > + bool check_on_resume;
> > };
> >
> > static void gpio_extcon_work(struct work_struct *work) @@ -103,6
> > +104,7 @@ static int gpio_extcon_probe(struct platform_device *pdev)
> > extcon_data->gpio_active_low = pdata->gpio_active_low;
> > extcon_data->state_on = pdata->state_on;
> > extcon_data->state_off = pdata->state_off;
> > + extcon_data->check_on_resume = pdata->check_on_resume;
> > if (pdata->state_on && pdata->state_off)
> > extcon_data->edev.print_state = extcon_gpio_print_state;
> > if (pdata->debounce) {
> > @@ -159,12 +161,30 @@ static int gpio_extcon_remove(struct
> platform_device *pdev)
> > return 0;
> > }
> >
> > +#ifdef CONFIG_PM_SLEEP
> > +static int gpio_extcon_resume(struct device *dev) {
> > + struct gpio_extcon_data *extcon_data;
> > +
> > + extcon_data = dev_get_drvdata(dev);
> > + if (extcon_data->check_on_resume)
> > + queue_delayed_work(system_power_efficient_wq,
> > + &extcon_data->work, extcon_data->debounce_jiffies);
> > + return 0;
> > +}
> > +#endif
> > +
> > +static const struct dev_pm_ops gpio_extcon_pm_ops = {
> > + SET_SYSTEM_SLEEP_PM_OPS(NULL, gpio_extcon_resume) };
> > +
> > static struct platform_driver gpio_extcon_driver = {
> > .probe = gpio_extcon_probe,
> > .remove = gpio_extcon_remove,
> > .driver = {
> > .name = "extcon-gpio",
> > .owner = THIS_MODULE,
> > + .pm = &gpio_extcon_pm_ops,
> > },
> > };
> >
> > diff --git a/include/linux/extcon/extcon-gpio.h
> > b/include/linux/extcon/extcon-gpio.h
> > index 4195810..c7f0c3e 100644
> > --- a/include/linux/extcon/extcon-gpio.h
> > +++ b/include/linux/extcon/extcon-gpio.h
> > @@ -51,6 +51,7 @@ struct gpio_extcon_platform_data {
> > /* if NULL, "0" or "1" will be printed */
> > const char *state_on;
> > const char *state_off;
> > + bool check_on_resume;
> > };
> >
> > #endif /* __EXTCON_GPIO_H__ */
> > --
> > 1.7.5.4
> >
> >
>
>
>
> To report this email as spam click
> https://www.mailcontrol.com/sr/MZbqvYs5QwJvpeaetUwhCQ==
> BhEym36W00netVd8YYrcUQrAnqreWejYcysfmF8UmgH1OQ== .
Member of the CSR plc group of companies. CSR plc registered in England and Wales, registered number 4187346, registered office Churchill House, Cambridge Business Park, Cowley Road, Cambridge, CB4 0WZ, United Kingdom
More information can be found at www.csr.com. Keep up to date with CSR on our technical blog, www.csr.com/blog, CSR people blog, www.csr.com/people, YouTube, www.youtube.com/user/CSRplc, Facebook, www.facebook.com/pages/CSR/191038434253534, or follow us on Twitter at www.twitter.com/CSR_plc.
New for 2014, you can now access the wide range of products powered by aptX at www.aptx.com.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v3] extcon: gpio: Add power resume support
2014-01-07 9:02 ` Rongjun Ying
@ 2014-01-09 0:54 ` Chanwoo Choi
0 siblings, 0 replies; 6+ messages in thread
From: Chanwoo Choi @ 2014-01-09 0:54 UTC (permalink / raw)
To: linux-arm-kernel
Hi Rongjun,
OK, I applied this patch on extcon-next branch.
Thannks,
Chanwoo Choi
On 01/07/2014 06:02 PM, Rongjun Ying wrote:
>
>
>> -----Original Message-----
>> From: Chanwoo Choi [mailto:cw00.choi at samsung.com]
>> Sent: Tuesday, January 07, 2014 2:09 PM
>> To: RongJun Ying
>> Cc: MyungJoo Ham; Barry Song; linux-arm-kernel at lists.infradead.org;
>> linux-kernel at vger.kernel.org; DL-SHA-WorkGroupLinux; Rongjun Ying
>> Subject: Re: [PATCH v3] extcon: gpio: Add power resume support
>>
>> Hi RongJun,
>>
>> On 01/07/2014 01:56 PM, RongJun Ying wrote:
>>> From: Rongjun Ying <rongjun.ying@csr.com>
>>>
>>> When system on the suspend state, Some SoC can't get gpio interrupt.
>>> After system resume, need send extcon uevent to userspace.
>>>
>>> Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
>>> Reviewed-by: Barry Song <Baohua.Song@csr.com>
>>> ---
>>> -v3:
>>> 'check_on_resume' instead of 'load_sleep_irq' as Chanwoo Choi's
>> proposal.
>>>
>>> drivers/extcon/extcon-gpio.c | 20 ++++++++++++++++++++
>>> include/linux/extcon/extcon-gpio.h | 1 +
>>> 2 files changed, 21 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/drivers/extcon/extcon-gpio.c
>>> b/drivers/extcon/extcon-gpio.c index 7e0dff5..fde52c1 100644
>>> --- a/drivers/extcon/extcon-gpio.c
>>> +++ b/drivers/extcon/extcon-gpio.c
>>> @@ -40,6 +40,7 @@ struct gpio_extcon_data {
>>> int irq;
>>> struct delayed_work work;
>>> unsigned long debounce_jiffies;
>>> + bool check_on_resume;
>>> };
>>>
>>> static void gpio_extcon_work(struct work_struct *work) @@ -103,6
>>> +104,7 @@ static int gpio_extcon_probe(struct platform_device *pdev)
>>> extcon_data->gpio_active_low = pdata->gpio_active_low;
>>> extcon_data->state_on = pdata->state_on;
>>> extcon_data->state_off = pdata->state_off;
>>> + extcon_data->check_on_resume = pdata->check_on_resume;
>>> if (pdata->state_on && pdata->state_off)
>>> extcon_data->edev.print_state = extcon_gpio_print_state;
>>> if (pdata->debounce) {
>>> @@ -159,12 +161,30 @@ static int gpio_extcon_remove(struct
>> platform_device *pdev)
>>> return 0;
>>> }
>>>
>>> +#ifdef CONFIG_PM_SLEEP
>>> +static int gpio_extcon_resume(struct device *dev) {
>>> + struct gpio_extcon_data *extcon_data;
>>> +
>>> + extcon_data = dev_get_drvdata(dev);
>>> + if (extcon_data->check_on_resume)
>>> + queue_delayed_work(system_power_efficient_wq,
>>> + &extcon_data->work, extcon_data->debounce_jiffies);
>>> + return 0;
>>> +}
>>> +#endif
>>> +
>>> +static const struct dev_pm_ops gpio_extcon_pm_ops = {
>>> + SET_SYSTEM_SLEEP_PM_OPS(NULL, gpio_extcon_resume)
>>
>> If CONFIG_PM_SLEEP is undefined, gpio_extcon_pm_ops cannot find
>> gpio_extcon_resume function.
>> You should define dummy function for gpio_extcon_resume function.
>>
>>
> In the include/Linux/pm.h
> If CONFIG_PM_SLEEP is undefined, the SET_SYSTEM_SLEEP_PM_OPS macro is bypassed.
>
> #ifdef CONFIG_PM_SLEEP
> #define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
> .suspend = suspend_fn, \
> .resume = resume_fn, \
> .freeze = suspend_fn, \
> .thaw = resume_fn, \
> .poweroff = suspend_fn, \
> .restore = resume_fn,
> #else
> #define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
> #endif
>>
>>
>> To report this email as spam click
>> https://www.mailcontrol.com/sr/MZbqvYs5QwJvpeaetUwhCQ==
>> UfkIuR0P8QH1DW7C+lVo3569nqreWejYcysfmF8UmgH1OQ== .
>
>
> Member of the CSR plc group of companies. CSR plc registered in England and Wales, registered number 4187346, registered office Churchill House, Cambridge Business Park, Cowley Road, Cambridge, CB4 0WZ, United Kingdom
> More information can be found at www.csr.com. Keep up to date with CSR on our technical blog, www.csr.com/blog, CSR people blog, www.csr.com/people, YouTube, www.youtube.com/user/CSRplc, Facebook, www.facebook.com/pages/CSR/191038434253534, or follow us on Twitter at www.twitter.com/CSR_plc.
> New for 2014, you can now access the wide range of products powered by aptX at www.aptx.com.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-01-09 0:54 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-01-07 4:56 [PATCH v3] extcon: gpio: Add power resume support RongJun Ying
2014-01-07 6:07 ` Chanwoo Choi
2014-01-07 9:48 ` Rongjun Ying
2014-01-07 6:09 ` Chanwoo Choi
2014-01-07 9:02 ` Rongjun Ying
2014-01-09 0:54 ` Chanwoo Choi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).