From mboxrd@z Thu Jan 1 00:00:00 1970 From: nm@ti.com (Nishanth Menon) Date: Fri, 17 Jan 2014 18:19:24 -0600 Subject: [PATCHv13 00/40] ARM: TI SoC clock DT conversion In-Reply-To: References: <52D53084.1070105@ti.com> <20140115031632.4167.2698@quantum> <20140115035011.4167.96678@quantum> <20140115171323.GA22739@atomide.com> <20140115192340.4167.87685@quantum> <20140115193547.GF7993@atomide.com> <20140116213954.4167.37071@quantum> <87r486mrh5.fsf@linaro.org> <20140117175312.GH7993@atomide.com> <52D9723A.6000700@ti.com> <20140117205832.4167.95162@quantum> <52D9C484.6000404@ti.com> Message-ID: <52D9C88C.3020508@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 01/17/2014 06:12 PM, Olof Johansson wrote: > On Fri, Jan 17, 2014 at 4:02 PM, Nishanth Menon wrote: > >> clk-next-6a0cad9 + next-20140117 multi_v7_defconfig + CONFIG_LPAE=y: >> 1: am335x-evm: Boot PASS: http://slexy.org/raw/s21GRhEOj4 >> 2: am335x-sk: Boot PASS: http://slexy.org/raw/s20zcNsD8h >> 3: am3517-evm: Boot PASS: http://slexy.org/raw/s27U9IfRKR >> 4: am37x-evm: Boot PASS: http://slexy.org/raw/s2zYyeonec >> 5: am43xx-epos: Boot PASS: http://slexy.org/raw/s21iCRjTHK >> 6: beagleboard-xm: Boot PASS: http://slexy.org/raw/s20bPGL3Sz >> 7: beaglebone-black: Boot PASS: http://slexy.org/raw/s21AhFmkCk >> 8: crane: No Image built - Missing platform support?: >> 9: dra7: Boot FAIL: http://slexy.org/raw/s21Qh3sQRu >> * DRA7 not enabled? >> 10: ldp: Boot PASS: http://slexy.org/raw/s21fvBfBgs >> 11: panda-es: Boot FAIL: http://slexy.org/raw/s20RsgVUZJ >> * known issue (https://patchwork.kernel.org/patch/3084521/) >> 12: sdp2430: Boot FAIL: v6 platform - wont boot with multi_v7 >> 13: sdp3430: Boot PASS: http://slexy.org/raw/s20rhjjBwe >> 14: sdp4430: Boot PASS: http://slexy.org/raw/s2My0UfNPm >> 15: uevm: Boot PASS: http://slexy.org/raw/s21aqF6eMN >> TOTAL = 15 boards, Booted Boards = 11, No Boot boards = 4 > > > I have a hard time believing the above; A8/A9 boards are not bootable > with CONFIG_LPAE=y... You are right! Drat!! I had CONFIG_LPAE=y in my script, not CONFIG_ARM_LPAE=y! Grrr... Retest in a around 30 mins.. -- Regards, Nishanth Menon