[linux-sunxi] [PATCH v5 13/14] ARM: sun4i: dts: Add ahci / sata support

[hdegoede@redhat.com (Hans de Goede)]

Hi,

On 01/23/2014 09:34 AM, Chen-Yu Tsai wrote:
> Hi,
>
> On Thu, Jan 23, 2014 at 3:04 AM, Hans de Goede <hdegoede@redhat.com> wrote:
>> From: Oliver Schinagl <oliver@schinagl.nl>
>>
>> This patch adds sunxi sata support to A10 boards that have such a connector.
>> Some boards also feature a regulator via a GPIO and support for this is also
>> added.
>>
>> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>>   arch/arm/boot/dts/sun4i-a10-a1000.dts      |  4 ++++
>>   arch/arm/boot/dts/sun4i-a10-cubieboard.dts |  6 +++++
>>   arch/arm/boot/dts/sun4i-a10.dtsi           |  8 +++++++
>>   arch/arm/boot/dts/sunxi-ahci-reg.dtsi      | 38 ++++++++++++++++++++++++++++++
>>   4 files changed, 56 insertions(+)
>>   create mode 100644 arch/arm/boot/dts/sunxi-ahci-reg.dtsi
>>
>> diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
>> index aef8207..3fb7305 100644
>> --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
>> +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
>> @@ -48,6 +48,10 @@
>>                          status = "okay";
>>                  };
>>
>> +               ahci: sata at 01c18000 {
>> +                       status = "okay";
>> +               };
>> +
>>                  pinctrl at 01c20800 {
>>                          mmc0_cd_pin_a1000: mmc0_cd_pin at 0 {
>>                                  allwinner,pins = "PH1";
>> diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
>> index f50fb2b..6ae1110 100644
>> --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
>> +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
>> @@ -12,6 +12,7 @@
>>
>>   /dts-v1/;
>>   /include/ "sun4i-a10.dtsi"
>> +/include/ "sunxi-ahci-reg.dtsi"
>>
>>   / {
>>          model = "Cubietech Cubieboard";
>> @@ -51,6 +52,11 @@
>>                          status = "okay";
>>                  };
>>
>> +               ahci: sata at 01c18000 {
>> +                       target-supply = <&reg_ahci_5v>;
>> +                       status = "okay";
>> +               };
>> +
>>                  pinctrl at 01c20800 {
>>                          mmc0_cd_pin_cubieboard: mmc0_cd_pin at 0 {
>>                                  allwinner,pins = "PH1";
>> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
>> index 4736dd2..198dcda 100644
>> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
>> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
>> @@ -331,6 +331,14 @@
>>                          status = "disabled";
>>                  };
>>
>> +               ahci: sata at 01c18000 {
>> +                       compatible = "allwinner,sun4i-a10-ahci";
>> +                       reg = <0x01c18000 0x1000>;
>> +                       interrupts = <56>;
>> +                       clocks = <&pll6 0>, <&ahb_gates 25>;
>> +                       status = "disabled";
>> +               };
>> +
>
> Consider adding
>
>      pinctrl-names = "default";
>
> in the ahci node to suppress "default pin state not found" warnings.
> Same goes for sun7i-a20.dtsi.

ahci does not use pinctrl, the ahci (and usb) phys have dedicated pins,
since they don't use pinctrl at all no such warnings are issued.

>
>>                  intc: interrupt-controller at 01c20400 {
>>                          compatible = "allwinner,sun4i-ic";
>>                          reg = <0x01c20400 0x400>;
>> diff --git a/arch/arm/boot/dts/sunxi-ahci-reg.dtsi b/arch/arm/boot/dts/sunxi-ahci-reg.dtsi
>> new file mode 100644
>> index 0000000..955b197
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sunxi-ahci-reg.dtsi
>> @@ -0,0 +1,38 @@
>> +/*
>> + * sunxi boards sata target power supply common code
>> + *
>> + * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
>> + *
>> + * The code contained herein is licensed under the GNU General Public
>> + * License. You may obtain a copy of the GNU General Public License
>> + * Version 2 or later at the following locations:
>> + *
>> + * http://www.opensource.org/licenses/gpl-license.html
>> + * http://www.gnu.org/copyleft/gpl.html
>> + */
>> +
>> +/ {
>> +       soc at 01c00000 {
>
> This block needs to be under
>
>      pinctrl at 01c20800 {
>
>> +               ahci_pwr_pin_a: ahci_pwr_pin at 0 {
>> +                       allwinner,pins = "PB8";
>> +                       allwinner,function = "gpio_out";
>> +                       allwinner,drive = <0>;
>> +                       allwinner,pull = <0>;
>> +               };
>
>      };

You're completely right, fixed in my local tree.

Regards,

Hans