[PATCH v5 4/4] [media] exynos-scaler: Add DT bindings for SCALER driver

[t.figa@samsung.com (Tomasz Figa)]

Hi Shaik,

On 09.01.2014 04:28, Shaik Ameer Basha wrote:
> This patch adds the DT binding documentation for the
> Exynos5420/5410 based SCALER device driver.
>
> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
>   .../devicetree/bindings/media/exynos5-scaler.txt   |   22 ++++++++++++++++++++
>   1 file changed, 22 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/media/exynos5-scaler.txt
>
> diff --git a/Documentation/devicetree/bindings/media/exynos5-scaler.txt b/Documentation/devicetree/bindings/media/exynos5-scaler.txt
> new file mode 100644
> index 0000000..9328e7d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/exynos5-scaler.txt
> @@ -0,0 +1,22 @@
> +* Samsung Exynos5 SCALER device
> +
> +SCALER is used for scaling, blending, color fill and color space
> +conversion on EXYNOS[5420/5410] SoCs.
> +
> +Required properties:
> +- compatible: should be "samsung,exynos5420-scaler" or
> +			"samsung,exynos5410-scaler"
> +- reg: should contain SCALER physical address location and length
> +- interrupts: should contain SCALER interrupt number

s/number/specifier/

> +- clocks: should contain the SCALER clock specifier, from the
> +			common clock bindings

s/specifier/phandle and specifier pair for each clock listed in 
clock-names property/

s/from/according to/

> +- clock-names: should be "scaler"

should contain exactly one entry:
  - "scaler" - IP bus clock.

Also this patch should be first in the series to let the driver added in 
further patches use already present bindings.

Best regards,
Tomasz