[alsa-devel] [PATCH v3 4/5] ASoC: tda998x: adjust the audio hw parameters from EDID

[lars@metafoo.de (Lars-Peter Clausen)]

On 02/05/2014 07:07 PM, Jean-Francois Moine wrote:
> On Wed, 05 Feb 2014 10:19:22 +0100
> Lars-Peter Clausen <lars@metafoo.de> wrote:
>
>>> So, in the CODEC, I don't see how I could update the parameters
>>> dictated by the EDID otherwise in changing the DAI driver parameters.
>>>
>>
>> The startup function is the right place. But instead of modifying the DAI
>> use snd_pcm_hw_constraint_mask64(), snd_pcm_hw_constraint_list(), etc. to
>> setup the additional constraints that come from the EDID.
>
> It is more complicated, but it works. Nevertheless, I have 2 problems:
>
> - snd_pcm_hw_constraint_list() keeps a pointer to the list, so, it
>    cannot be in the stack. It fix this with static struct and rate array.
>

Right. If the struct is modified though it should be per device and not 
global. I think the best way to implement this is to make the array static 
and specify a mask for the constraint based on the EDID. E.g.

static unsigned int hdmi_rates[] = {
	32000,
	44100,
	48000,
	88200,
	96000,
	176400,
	192000,
};

rate_mask = 0;

while (...) {
	...
	rate_mask |= 1 << sad[1];
}

rate_constraints->list = hdmi_rates;
rate_constraints->count = ARRAY_SIZE(hdmi_rates);
rate_constraints->mask = rate_mask;

> - snd_pcm_hw_constraint_mask64() is not exported.
>    Is there an other way to set constraints on the formats/sample widths?

I think that's a bug. Both snd_pcm_hw_constraint_mask() and 
snd_pcm_hw_constraint_mask64() should be exported. Can you send a patch?

- Lars