From: tomasz.figa@gmail.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/12] ARM: S3C24XX: convert s3c2410, s3c2440 s3c2442 to common clock framework
Date: Sun, 09 Feb 2014 20:56:30 +0100 [thread overview]
Message-ID: <52F7DD6E.8070303@gmail.com> (raw)
In-Reply-To: <201312131356.40755.heiko@sntech.de>
Hi Heiko,
On 13.12.2013 13:56, Heiko St?bner wrote:
> This series converts the earliest s3c socs to use a clock driver based on the
> common clock framework instead of the old Samsung clock implementation.
>
> The only obstacle I found was the configuration of the clkout outputs in
> the different machines. As I lack hardware test and knowledge on what is
> expected there, somebody with interest in these machines will have to
> step up to implement the clkout configuration
> This can for example be done in the machine_init function after
> the platform-devices (and thus the dclk-device) are populated.
>
> This leaves the s3c2412 soc to be converted, as it has yet another different
> clock tree.
>
> Tested on an Openmoko Neo Freerunner (S3C2442), but of course more tests
> would be really helpful.
>
> Heiko Stuebner (12):
> ARM: S3C24XX: cpufreq-utils: don't write raw values to MPLLCON when using ccf
> dt-bindings: document s3c24xx controller for external clock output
> clk: samsung: add clock driver for external clock outputs
> ARM: S3C24XX: enable usage of common dclk if common clock framework is enabled
> ARM: S3C24XX: only store clock registers when old clock code is active
> clk: samsung: add plls used by the early s3c24xx cpus
> dt-bindings: add documentation for s3c2410 clock controller
> clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442
> ARM: S3C24XX: add platform code for conversion to the common clock framework
> ARM: S3C24XX: convert s3c2440 and s3c2442 to common clock framework
> ARM: S3C24XX: convert s3c2410 to common clock framework
> ARM: S3C24XX: remove legacy clock code
>
> .../bindings/clock/samsung,s3c2410-clock.txt | 50 ++
> .../bindings/clock/samsung,s3c2410-dclk.txt | 53 ++
> arch/arm/mach-s3c24xx/Kconfig | 50 +-
> arch/arm/mach-s3c24xx/Makefile | 6 +-
> arch/arm/mach-s3c24xx/clock-dclk.c | 195 --------
> arch/arm/mach-s3c24xx/clock-s3c2410.c | 285 -----------
> arch/arm/mach-s3c24xx/clock-s3c2440.c | 217 --------
> arch/arm/mach-s3c24xx/clock-s3c244x.c | 141 ------
> arch/arm/mach-s3c24xx/common.c | 45 +-
> arch/arm/mach-s3c24xx/common.h | 11 +-
> arch/arm/mach-s3c24xx/cpufreq-utils.c | 13 +
> arch/arm/mach-s3c24xx/include/mach/regs-clock.h | 18 -
> arch/arm/mach-s3c24xx/include/mach/regs-gpio.h | 3 -
> arch/arm/mach-s3c24xx/mach-amlm5900.c | 9 +-
> arch/arm/mach-s3c24xx/mach-anubis.c | 15 +-
> arch/arm/mach-s3c24xx/mach-at2440evb.c | 10 +-
> arch/arm/mach-s3c24xx/mach-bast.c | 15 +-
> arch/arm/mach-s3c24xx/mach-gta02.c | 8 +-
> arch/arm/mach-s3c24xx/mach-h1940.c | 10 +-
> arch/arm/mach-s3c24xx/mach-mini2440.c | 10 +-
> arch/arm/mach-s3c24xx/mach-n30.c | 12 +-
> arch/arm/mach-s3c24xx/mach-nexcoder.c | 10 +-
> arch/arm/mach-s3c24xx/mach-osiris.c | 15 +-
> arch/arm/mach-s3c24xx/mach-otom.c | 10 +-
> arch/arm/mach-s3c24xx/mach-qt2410.c | 9 +-
> arch/arm/mach-s3c24xx/mach-rx1950.c | 15 +-
> arch/arm/mach-s3c24xx/mach-rx3715.c | 10 +-
> arch/arm/mach-s3c24xx/mach-smdk2410.c | 9 +-
> arch/arm/mach-s3c24xx/mach-smdk2440.c | 10 +-
> arch/arm/mach-s3c24xx/mach-tct_hammer.c | 9 +-
> arch/arm/mach-s3c24xx/mach-vr1000.c | 15 +-
> arch/arm/mach-s3c24xx/pm.c | 13 +-
> arch/arm/mach-s3c24xx/s3c2410.c | 56 ---
> arch/arm/mach-s3c24xx/s3c2442.c | 111 -----
> arch/arm/mach-s3c24xx/s3c244x.c | 59 +--
> drivers/clk/samsung/Makefile | 2 +
> drivers/clk/samsung/clk-pll.c | 182 +++++++
> drivers/clk/samsung/clk-pll.h | 3 +
> drivers/clk/samsung/clk-s3c2410-dclk.c | 517 ++++++++++++++++++++
> drivers/clk/samsung/clk-s3c2410.c | 428 ++++++++++++++++
> include/dt-bindings/clock/samsung,s3c2410-clock.h | 64 +++
> include/dt-bindings/clock/samsung,s3c2410-dclk.h | 28 ++
> 42 files changed, 1575 insertions(+), 1176 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
> create mode 100644 Documentation/devicetree/bindings/clock/samsung,s3c2410-dclk.txt
> delete mode 100644 arch/arm/mach-s3c24xx/clock-dclk.c
> delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2410.c
> delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2440.c
> delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c244x.c
> create mode 100644 drivers/clk/samsung/clk-s3c2410-dclk.c
> create mode 100644 drivers/clk/samsung/clk-s3c2410.c
> create mode 100644 include/dt-bindings/clock/samsung,s3c2410-clock.h
> create mode 100644 include/dt-bindings/clock/samsung,s3c2410-dclk.h
>
For patches 4, 5, 9, 10, 11, 12:
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
For patches 6, 7:
Acked-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
next prev parent reply other threads:[~2014-02-09 19:56 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-13 12:56 [PATCH 00/12] ARM: S3C24XX: convert s3c2410, s3c2440 s3c2442 to common clock framework Heiko Stübner
2013-12-13 12:57 ` [PATCH 01/12] ARM: S3C24XX: cpufreq-utils: don't write raw values to MPLLCON when using ccf Heiko Stübner
2014-02-08 20:23 ` Tomasz Figa
2013-12-13 12:59 ` [PATCH 02/12] dt-bindings: document s3c24xx controller for external clock output Heiko Stübner
2014-02-09 1:54 ` Tomasz Figa
2014-02-16 20:33 ` Heiko Stübner
2014-02-16 20:51 ` Tomasz Figa
2013-12-13 12:59 ` [PATCH 03/12] clk: samsung: add clock driver for external clock outputs Heiko Stübner
2013-12-31 19:46 ` Mike Turquette
2014-02-09 2:25 ` Tomasz Figa
2013-12-13 13:00 ` [PATCH 04/12] ARM: S3C24XX: enable usage of common dclk if common clock framework is enabled Heiko Stübner
2013-12-13 13:00 ` [PATCH 05/12] ARM: S3C24XX: only store clock registers when old clock code is active Heiko Stübner
2013-12-13 13:00 ` [PATCH 06/12] clk: samsung: add plls used by the early s3c24xx cpus Heiko Stübner
2013-12-31 19:45 ` Mike Turquette
2013-12-13 13:01 ` [PATCH 08/12] clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442 Heiko Stübner
2014-02-06 14:12 ` Mike Turquette
2014-02-09 19:34 ` Tomasz Figa
2014-02-17 21:05 ` Heiko Stübner
2014-02-17 22:37 ` Tomasz Figa
2014-02-17 22:48 ` Heiko Stübner
2013-12-13 13:02 ` [PATCH 09/12] ARM: S3C24XX: add platform code for conversion to the common clock framework Heiko Stübner
2013-12-13 13:02 ` [PATCH 10/12] ARM: S3C24XX: convert s3c2440 and s3c2442 to " Heiko Stübner
2013-12-13 13:03 ` [PATCH 11/12] ARM: S3C24XX: convert s3c2410 " Heiko Stübner
2013-12-13 13:03 ` [PATCH 12/12] ARM: S3C24XX: remove legacy clock code Heiko Stübner
2014-02-09 19:56 ` Tomasz Figa [this message]
2014-02-11 6:16 ` [PATCH 00/12] ARM: S3C24XX: convert s3c2410, s3c2440 s3c2442 to common clock framework Kukjin Kim
2014-02-11 9:20 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52F7DD6E.8070303@gmail.com \
--to=tomasz.figa@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).