[PATCH] video: imxfb: Use regulator API with LCD class for powering

[tomi.valkeinen@ti.com (Tomi Valkeinen)]

On 10/02/14 14:16, Alexander Shiyan wrote:
> ???????????, 10 ??????? 2014, 14:05 +02:00 ?? Tomi Valkeinen <tomi.valkeinen@ti.com>:
>> On 21/12/13 13:08, Alexander Shiyan wrote:
>>> This patch replaces custom lcd_power() callback with
>>> regulator API over LCD class.
>>>
>>> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
>>> ---
>>>  .../devicetree/bindings/video/fsl,imx-fb.txt       |  1 +
>>>  arch/arm/mach-imx/mach-mx27ads.c                   | 55 +++++++++++++++--
>>>  drivers/video/imxfb.c                              | 71
>> +++++++++++++++++++---
>>>  include/linux/platform_data/video-imxfb.h          |  1 -
>>>  4 files changed, 114 insertions(+), 14 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
>> b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
>>> index 46da08d..e6b1ee9 100644
>>> --- a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
>>> +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
>>> @@ -15,6 +15,7 @@ Required nodes:
>>>  	- fsl,pcr: LCDC PCR value
>>>  
>>>  Optional properties:
>>> +- lcd-supply: Regulator for LCD supply voltage.
>>>  - fsl,dmacr: DMA Control Register value. This is optional. By default, the
>>>  	register is not modified as recommended by the datasheet.
>>>  - fsl,lscr1: LCDC Sharp Configuration Register value.
>>> diff --git a/arch/arm/mach-imx/mach-mx27ads.c
> ...
>>> +static void __init mx27ads_regulator_init(void)
>>> +{
>>> +	struct gpio_chip *vchip;
>>> +
>>> +	vchip = kzalloc(sizeof(*vchip), GFP_KERNEL);
>>> +	vchip->owner		= THIS_MODULE;
>>> +	vchip->label		= "LCD";
>>> +	vchip->base		= MX27ADS_LCD_GPIO;
>>> +	vchip->ngpio		= 1;
>>> +	vchip->direction_output	= vgpio_dir_out;
>>> +	vchip->set		= vgpio_set;
>>> +	gpiochip_add(vchip);
>>> +
>>> +	platform_device_register_data(&platform_bus, "reg-fixed-voltage",
>>> +				      PLATFORM_DEVID_AUTO,
>>> +				      &mx27ads_lcd_regulator_pdata,
>>> +				      sizeof(mx27ads_lcd_regulator_pdata));
>>> +}
>>> +
>>
>> Hmm, isn't all this something that should be in the board's .dts?
> 
> There are no DT support for this board yet.

Oh, ok. You added 'lcd-supply' to devtree binding documentation, so I
presumed DT is being used.

The drivers/video side looks fine. I can either merge this via fbdev
tree if I get an ack from arch/arm/mach-imx/mach-mx27ads.c's maintainer,
or this can go via imx tree with my ack.

 Tomi


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 901 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140210/dc5d854f/attachment-0001.sig>